I did a binary update from 5.1-current, created with a mid October snapshot, to 5.2 beta. The installer had trouble, at one point reporting negative disk space available when of course there is plenty of space. This server has a single SATA drive with three slices for FreeBSD, a 5 GB /, and 42 GB /usr, along with swap. I had to do a binary update as this is a system that has been problematic with the ATA subsystem due to the combination of the Adaptec SATA 1210SA (in non RAID mode with a single drive) and a Maxtor 6Y120M0 120 GB drive. The system acts as if some of the older pre 64 bit filesystem code in still present the beta boot/kernel. I did boot from the mini-iso CD-ROM. Once the installer finished, I rebooted. The server claims to be a 5.2 beta kernel, but perhaps as a side effect of the new dynamic linking must have some old pre-64-bit filesystem code it is still using. =============== $ uname -a FreeBSD barney.computinginnovations.com 5.2-BETA FreeBSD 5.2-BETA #0: Tue Nov 25 08:24:08 GMT 2003 root_at_wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386 =============== As a result, on reboot, df core dumped as did fsck and mount. The static mount in /rescue did work though. As these problems look like what is in UPDATING: =============== 20031112: The statfs structure has been updated with 64-bit fields to allow accurate reporting of multi-terabyte filesystem sizes. You should build world, then build and boot the new kernel BEFORE doing a `installworld' as the new kernel will know about binaries using the old statfs structure, but an old kernel will not know about the new system calls that support the new statfs structure. Note that the backwards compatibility is only present when the kernel is configured with the COMPAT_FREEBSD4 option. Since even /bin/sh will not run with a new kernel without said option you're pretty much dead in the water without it. Make sure you have COMPAT_FREEBSD4! Running an old kernel after a `make world' will cause programs such as `df' that do a statfs system call to fail with a bad system call. Marco Wertejuk <wertejuk_at_mwcis.com> also reports that cfsd (ports/security/cfs) needs to be recompiled after these changes are installed. =============== I will cvsup to current then build and install a new kernel, then build and install world per UPDATING. If anyone wants more information, let me know. Below is the verbose dmesg. -Derek verbose dmesg: ==================================== Nov 26 19:02:28 barney syslogd: kernel boot file is /boot/kernel/kernel Nov 26 19:02:28 barney kernel: 12 14 15 Nov 26 19:02:28 barney kernel: slot 1 1 0 B 0x6a 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 1 1 0 C 0x6b 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 1 1 0 D 0x68 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 2 1 1 A 0x6a 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 2 1 1 B 0x69 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 2 1 1 C 0x68 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 2 1 1 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 3 1 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 3 1 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 3 1 2 C 0x61 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 3 1 2 D 0x60 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 4 1 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 4 1 3 B 0x62 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 4 1 3 C 0x69 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 4 1 3 D 0x6a 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 5 1 4 A 0x61 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 5 1 4 B 0x6b 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 5 1 4 C 0x60 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 5 1 4 D 0x68 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 6 1 5 A 0x62 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 6 1 5 B 0x68 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 6 1 5 C 0x6a 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: slot 6 1 5 D 0x69 3 4 5 6 7 9 10 11 12 14 15 Nov 26 19:02:28 barney kernel: AcpiOsDerivePciId: bus 0 dev 31 func 0 Nov 26 19:02:28 barney kernel: acpi0: Power Button (fixed) Nov 26 19:02:28 barney kernel: ACPI timer looks GOOD min = 4, max = 5, width = 1 Nov 26 19:02:28 barney kernel: ACPI timer looks GOOD min = 4, max = 4, width = 0 Nov 26 19:02:28 barney kernel: ACPI timer looks GOOD min = 4, max = 5, width = 1 Nov 26 19:02:28 barney last message repeated 4 times Nov 26 19:02:28 barney kernel: ACPI timer looks GOOD min = 4, max = 4, width = 0 Nov 26 19:02:28 barney kernel: ACPI timer looks GOOD min = 4, max = 5, width = 1 Nov 26 19:02:28 barney kernel: ACPI timer looks GOOD min = 4, max = 5, width = 1 Nov 26 19:02:28 barney kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Nov 26 19:02:28 barney kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 Nov 26 19:02:28 barney kernel: acpi_cpu0: <CPU> on acpi0 Nov 26 19:02:28 barney kernel: acpi_cpu1: <CPU> on acpi0 Nov 26 19:02:28 barney kernel: acpi_cpu1: Failed to attach throttling P_CNT Nov 26 19:02:28 barney kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Nov 26 19:02:28 barney kernel: ---- initial configuration ------------------------ Nov 26 19:02:28 barney kernel: ---- before setting priority for links ------------ Nov 26 19:02:28 barney kernel: ---- before fixup boot-disabled links ------------- Nov 26 19:02:28 barney kernel: ---- after fixup boot-disabled links -------------- Nov 26 19:02:28 barney kernel: ---- arbitrated configuration --------------------- Nov 26 19:02:28 barney kernel: pci0: <ACPI PCI bus> on pcib0 Nov 26 19:02:28 barney kernel: pci0: physical bus=0 Nov 26 19:02:28 barney kernel: map[10]: type 3, range 32, base f8000000, size 26, enabled Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x2560, revid=0x03 Nov 26 19:02:28 barney kernel: bus=0, slot=0, func=0 Nov 26 19:02:28 barney kernel: class=06-00-00, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: map[10]: type 3, range 32, base f0000000, size 27, enabled Nov 26 19:02:28 barney kernel: map[14]: type 1, range 32, base ffa80000, size 19, enabled Nov 26 19:02:28 barney kernel: pcib0: matched entry for 0.2.INTA (source ) Nov 26 19:02:28 barney kernel: pcib0: device is hardwired to IRQ 16 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x2562, revid=0x03 Nov 26 19:02:28 barney kernel: bus=0, slot=2, func=0 Nov 26 19:02:28 barney kernel: class=03-00-00, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=a, irq=16 Nov 26 19:02:28 barney kernel: powerspec 1 supports D0 D3 current D0 Nov 26 19:02:28 barney kernel: map[20]: type 4, range 32, base 0000e800, size 5, enabled Nov 26 19:02:28 barney kernel: pcib0: matched entry for 0.29.INTA (source ) Nov 26 19:02:28 barney kernel: pcib0: device is hardwired to IRQ 16 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24c2, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=29, func=0 Nov 26 19:02:28 barney kernel: class=0c-03-00, hdrtype=0x00, mfdev=1 Nov 26 19:02:28 barney kernel: cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=a, irq=16 Nov 26 19:02:28 barney kernel: map[20]: type 4, range 32, base 0000e880, size 5, enabled Nov 26 19:02:28 barney kernel: pcib0: matched entry for 0.29.INTB (source ) Nov 26 19:02:28 barney kernel: pcib0: device is hardwired to IRQ 19 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24c4, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=29, func=1 Nov 26 19:02:28 barney kernel: class=0c-03-00, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=b, irq=19 Nov 26 19:02:28 barney kernel: map[20]: type 4, range 32, base 0000ec00, size 5, enabled Nov 26 19:02:28 barney kernel: pcib0: matched entry for 0.29.INTC (source ) Nov 26 19:02:28 barney kernel: pcib0: device is hardwired to IRQ 18 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24c7, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=29, func=2 Nov 26 19:02:28 barney kernel: class=0c-03-00, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=c, irq=18 Nov 26 19:02:28 barney kernel: map[10]: type 1, range 32, base ffa7fc00, size 10, enabled Nov 26 19:02:28 barney kernel: pcib0: matched entry for 0.29.INTD (source ) Nov 26 19:02:28 barney kernel: pcib0: device is hardwired to IRQ 23 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24cd, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=29, func=7 Nov 26 19:02:28 barney kernel: class=0c-03-20, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=d, irq=23 Nov 26 19:02:28 barney kernel: powerspec 2 supports D0 D3 current D0 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x244e, revid=0x82 Nov 26 19:02:28 barney kernel: bus=0, slot=30, func=0 Nov 26 19:02:28 barney kernel: class=06-04-00, hdrtype=0x01, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns) Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24c0, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=31, func=0 Nov 26 19:02:28 barney kernel: class=06-01-00, hdrtype=0x00, mfdev=1 Nov 26 19:02:28 barney kernel: cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: map[10]: type 4, range 32, base 00000000, size 3, enabled Nov 26 19:02:28 barney kernel: map[14]: type 4, range 32, base 00000000, size 2, enabled Nov 26 19:02:28 barney kernel: map[18]: type 4, range 32, base 00000000, size 3, enabled Nov 26 19:02:28 barney kernel: map[1c]: type 4, range 32, base 00000000, size 2, enabled Nov 26 19:02:28 barney kernel: map[20]: type 4, range 32, base 0000ffa0, size 4, enabled Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24cb, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=31, func=1 Nov 26 19:02:28 barney kernel: class=01-01-8a, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=a, irq=255 Nov 26 19:02:28 barney kernel: map[20]: type 4, range 32, base 0000e000, size 5, enabled Nov 26 19:02:28 barney kernel: pcib0: matched entry for 0.31.INTB (source ) Nov 26 19:02:28 barney kernel: pcib0: device is hardwired to IRQ 17 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24c3, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=31, func=3 Nov 26 19:02:28 barney kernel: class=0c-05-00, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=b, irq=17 Nov 26 19:02:28 barney kernel: map[10]: type 4, range 32, base 0000e400, size 8, enabled Nov 26 19:02:28 barney kernel: map[14]: type 4, range 32, base 0000e080, size 6, enabled Nov 26 19:02:28 barney kernel: map[18]: type 1, range 32, base ffa7f800, size 9, enabled Nov 26 19:02:28 barney kernel: map[1c]: type 1, range 32, base ffa7f400, size 8, enabled Nov 26 19:02:28 barney kernel: pcib0: matched entry for 0.31.INTB (source ) Nov 26 19:02:28 barney kernel: pcib0: device is hardwired to IRQ 17 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x24c5, revid=0x02 Nov 26 19:02:28 barney kernel: bus=0, slot=31, func=5 Nov 26 19:02:28 barney kernel: class=04-01-00, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=b, irq=17 Nov 26 19:02:28 barney kernel: powerspec 2 supports D0 D3 current D0 Nov 26 19:02:28 barney kernel: agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0 Nov 26 19:02:28 barney kernel: agp0: detected 892k stolen memory Nov 26 19:02:28 barney kernel: agp0: aperture size is 128M Nov 26 19:02:28 barney kernel: uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 16 at device 29.0 on pci0 Nov 26 19:02:28 barney kernel: usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 Nov 26 19:02:28 barney kernel: usb0: USB revision 1.0 Nov 26 19:02:28 barney kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Nov 26 19:02:28 barney kernel: uhub0: 2 ports with 2 removable, self powered Nov 26 19:02:28 barney kernel: uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 19 at device 29.1 on pci0 Nov 26 19:02:28 barney kernel: usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 Nov 26 19:02:28 barney kernel: usb1: USB revision 1.0 Nov 26 19:02:28 barney kernel: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Nov 26 19:02:28 barney kernel: uhub1: 2 ports with 2 removable, self powered Nov 26 19:02:28 barney kernel: uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 18 at device 29.2 on pci0 Nov 26 19:02:28 barney kernel: usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 Nov 26 19:02:28 barney kernel: usb2: USB revision 1.0 Nov 26 19:02:28 barney kernel: uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Nov 26 19:02:28 barney kernel: uhub2: 2 ports with 2 removable, self powered Nov 26 19:02:28 barney kernel: pci0: <serial bus, USB> at device 29.7 (no driver attached) Nov 26 19:02:28 barney kernel: pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 Nov 26 19:02:28 barney kernel: pcib1: secondary bus 1 Nov 26 19:02:28 barney kernel: pcib1: subordinate bus 1 Nov 26 19:02:28 barney kernel: pcib1: I/O decode 0xd000-0xdfff Nov 26 19:02:28 barney kernel: pcib1: memory decode 0xff700000-0xff8fffff Nov 26 19:02:28 barney kernel: pcib1: prefetched decode 0xe6a00000-0xe6afffff Nov 26 19:02:28 barney kernel: ---- initial configuration ------------------------ Nov 26 19:02:28 barney kernel: ---- before setting priority for links ------------ Nov 26 19:02:28 barney kernel: ---- before fixup boot-disabled links ------------- Nov 26 19:02:28 barney kernel: ---- after fixup boot-disabled links -------------- Nov 26 19:02:28 barney kernel: ---- arbitrated configuration --------------------- Nov 26 19:02:28 barney kernel: pci1: <ACPI PCI bus> on pcib1 Nov 26 19:02:28 barney kernel: pci1: physical bus=1 Nov 26 19:02:28 barney kernel: map[10]: type 4, range 32, base 0000dc00, size 3, enabled Nov 26 19:02:28 barney kernel: map[14]: type 4, range 32, base 0000d880, size 2, enabled Nov 26 19:02:28 barney kernel: map[18]: type 4, range 32, base 0000d800, size 3, enabled Nov 26 19:02:28 barney kernel: map[1c]: type 4, range 32, base 0000d480, size 2, enabled Nov 26 19:02:28 barney kernel: map[20]: type 4, range 32, base 0000d400, size 4, enabled Nov 26 19:02:28 barney kernel: map[24]: type 1, range 32, base ff8ffc00, size 9, enabled Nov 26 19:02:28 barney kernel: pcib1: matched entry for 1.5.INTA (source ) Nov 26 19:02:28 barney kernel: pcib1: device is hardwired to IRQ 18 Nov 26 19:02:28 barney kernel: found-> vendor=0x1095, dev=0x0240, revid=0x02 Nov 26 19:02:28 barney kernel: bus=1, slot=5, func=0 Nov 26 19:02:28 barney kernel: class=01-04-01, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Nov 26 19:02:28 barney kernel: intpin=a, irq=18 Nov 26 19:02:28 barney kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Nov 26 19:02:28 barney kernel: map[10]: type 1, range 32, base ff8fe000, size 12, enabled Nov 26 19:02:28 barney kernel: map[14]: type 4, range 32, base 0000d080, size 6, enabled Nov 26 19:02:28 barney kernel: pcib1: matched entry for 1.8.INTA (source ) Nov 26 19:02:28 barney kernel: pcib1: device is hardwired to IRQ 20 Nov 26 19:02:28 barney kernel: found-> vendor=0x8086, dev=0x1039, revid=0x82 Nov 26 19:02:28 barney kernel: bus=1, slot=8, func=0 Nov 26 19:02:28 barney kernel: class=02-00-00, hdrtype=0x00, mfdev=0 Nov 26 19:02:28 barney kernel: cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) Nov 26 19:02:28 barney kernel: lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) Nov 26 19:02:28 barney kernel: intpin=a, irq=20 Nov 26 19:02:28 barney kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Nov 26 19:02:28 barney kernel: atapci0: <SiI 3112 SATA150 controller> port 0xd400-0xd40f,0xd480-0xd483,0xd800-0xd807,0xd880-0xd883,0xdc00-0xdc07 mem 0xff8ffc00-0xff8ffdff irq 18 at device 5.0 on pci1 Nov 26 19:02:28 barney kernel: pcib1: device atapci0 requested decoded I/O range 0xd400-0xd40f Nov 26 19:02:28 barney kernel: atapci0: [MPSAFE] Nov 26 19:02:28 barney kernel: pcib1: device atapci0 requested decoded memory range 0xff8ffc00-0xff8ffdff Nov 26 19:02:28 barney kernel: ata2: reset tp1 mask=01 ostat0=50 ostat1=00 Nov 26 19:02:28 barney kernel: ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 Nov 26 19:02:28 barney kernel: ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER> Nov 26 19:02:28 barney kernel: ata2: at 0xff8ffc00 on atapci0 Nov 26 19:02:28 barney kernel: ata2: [MPSAFE] Nov 26 19:02:28 barney kernel: ata3: reset tp1 mask=01 ostat0=7f ostat1=00 Nov 26 19:02:28 barney kernel: ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 Nov 26 19:02:28 barney last message repeated 21 times Nov 26 19:02:28 barney kernel: ata3: reset tp2 mask=00 stat0=ff stat1=00 devices=0x0 Nov 26 19:02:28 barney kernel: ata3: at 0xff8ffc00 on atapci0 Nov 26 19:02:28 barney kernel: ata3: [MPSAFE] Nov 26 19:02:28 barney kernel: fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xd080-0xd0bf mem 0xff8fe000-0xff8fefff irq 20 at device 8.0 on pci1 Nov 26 19:02:28 barney kernel: pcib1: device fxp0 requested decoded memory range 0xff8fe000-0xff8fefff Nov 26 19:02:28 barney kernel: fxp0: using memory space register mapping Nov 26 19:02:28 barney kernel: fxp0: Ethernet address 00:07:e9:59:e5:3c Nov 26 19:02:28 barney kernel: fxp0: PCI IDs: 8086 1039 8086 3011 0082 Nov 26 19:02:28 barney kernel: fxp0: Dynamic Standby mode is disabled Nov 26 19:02:28 barney kernel: miibus0: <MII bus> on fxp0 Nov 26 19:02:28 barney kernel: inphy0: <i82562ET 10/100 media interface> on miibus0 Nov 26 19:02:28 barney kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Nov 26 19:02:28 barney kernel: fxp0: bpf attached Nov 26 19:02:28 barney kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0 Nov 26 19:02:28 barney kernel: isa0: <ISA bus> on isab0 Nov 26 19:02:28 barney kernel: atapci1: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 Nov 26 19:02:28 barney kernel: ata0: reset tp1 mask=03 ostat0=50 ostat1=00 Nov 26 19:02:28 barney kernel: ata0-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb Nov 26 19:02:28 barney kernel: ata0-slave: stat=0x00 err=0x01 lsb=0x7f msb=0x7f Nov 26 19:02:28 barney kernel: ata0: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER> Nov 26 19:02:28 barney kernel: ata0: at 0x1f0 irq 14 on atapci1 Nov 26 19:02:28 barney kernel: ata0: [MPSAFE] Nov 26 19:02:28 barney kernel: ata1: at 0x170 irq 15 on atapci1 Nov 26 19:02:28 barney kernel: ata1: [MPSAFE] Nov 26 19:02:28 barney kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached) Nov 26 19:02:28 barney kernel: pci0: <multimedia, audio> at device 31.5 (no driver attached) Nov 26 19:02:28 barney kernel: acpi_button0: <Sleep Button> on acpi0 Nov 26 19:02:28 barney kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 Nov 26 19:02:28 barney kernel: sio0: configured irq 4 not in bitmap of probed irqs 0 Nov 26 19:02:28 barney kernel: sio0: port may not be enabled Nov 26 19:02:28 barney kernel: sio0: irq maps: 0 0 0 0 Nov 26 19:02:28 barney kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0 Nov 26 19:02:28 barney kernel: sio0: type 16550A Nov 26 19:02:28 barney kernel: ppc0: using extended I/O port range Nov 26 19:02:28 barney kernel: ppc0: EPP SPP Nov 26 19:02:28 barney kernel: ppc0 port 0x378-0x37f irq 7 on acpi0 Nov 26 19:02:28 barney kernel: ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode Nov 26 19:02:28 barney kernel: ppbus0: <Parallel port bus> on ppc0 Nov 26 19:02:28 barney kernel: plip0: <PLIP network interface> on ppbus0 Nov 26 19:02:28 barney kernel: plip0: bpf attached Nov 26 19:02:28 barney kernel: lpt0: <Printer> on ppbus0 Nov 26 19:02:28 barney kernel: lpt0: Interrupt-driven port Nov 26 19:02:28 barney kernel: ppi0: <Parallel I/O> on ppbus0 Nov 26 19:02:28 barney kernel: unknown: not probed (disabled) Nov 26 19:02:28 barney kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 Nov 26 19:02:28 barney kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Nov 26 19:02:28 barney kernel: atkbd: the current kbd controller command byte 0065 Nov 26 19:02:28 barney kernel: atkbd: keyboard ID 0x41ab (2) Nov 26 19:02:28 barney kernel: kbd0 at atkbd0 Nov 26 19:02:28 barney kernel: kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 Nov 26 19:02:28 barney kernel: psm0: unable to allocate IRQ Nov 26 19:02:28 barney kernel: psmcpnp0 irq 12 on acpi0 Nov 26 19:02:28 barney kernel: psm0: current command byte:0065 Nov 26 19:02:28 barney kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Nov 26 19:02:28 barney kernel: psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons Nov 26 19:02:28 barney kernel: psm0: config:00000000, flags:00000000, packet size:3 Nov 26 19:02:28 barney kernel: psm0: syncmask:c0, syncbits:00 Nov 26 19:02:28 barney kernel: unknown: not probed (disabled) Nov 26 19:02:28 barney kernel: npx0: [FAST] Nov 26 19:02:28 barney kernel: npx0: <math processor> on motherboard Nov 26 19:02:28 barney kernel: npx0: INT 16 interface Nov 26 19:02:28 barney kernel: ata: ata0 already exists; skipping it Nov 26 19:02:28 barney kernel: ata: ata1 already exists; skipping it Nov 26 19:02:28 barney kernel: atkbdc: atkbdc0 already exists; skipping it Nov 26 19:02:28 barney kernel: fdc: fdc0 already exists; skipping it Nov 26 19:02:28 barney kernel: ppc: ppc0 already exists; skipping it Nov 26 19:02:28 barney kernel: sio: sio0 already exists; skipping it Nov 26 19:02:28 barney kernel: Trying Read_Port at 203 Nov 26 19:02:28 barney kernel: Trying Read_Port at 243 Nov 26 19:02:28 barney kernel: Trying Read_Port at 283 Nov 26 19:02:28 barney kernel: Trying Read_Port at 2c3 Nov 26 19:02:28 barney kernel: Trying Read_Port at 303 Nov 26 19:02:28 barney kernel: Trying Read_Port at 343 Nov 26 19:02:28 barney kernel: Trying Read_Port at 383 Nov 26 19:02:28 barney kernel: Trying Read_Port at 3c3 Nov 26 19:02:28 barney kernel: unknown: status reg test failed ff Nov 26 19:02:28 barney last message repeated 5 times Nov 26 19:02:28 barney kernel: ex_isa_identify() Nov 26 19:02:28 barney kernel: sc: sc0 already exists; skipping it Nov 26 19:02:28 barney kernel: vga: vga0 already exists; skipping it Nov 26 19:02:28 barney kernel: isa_probe_children: disabling PnP devices Nov 26 19:02:28 barney kernel: isa_probe_children: probing non-PnP devices Nov 26 19:02:28 barney kernel: orm0: <Option ROM> at iomem 0xcb800-0xcf7ff on isa0 Nov 26 19:02:28 barney kernel: pmtimer0 on isa0 Nov 26 19:02:28 barney kernel: adv0: not probed (disabled) Nov 26 19:02:28 barney kernel: aha0: not probed (disabled) Nov 26 19:02:28 barney kernel: aic0: not probed (disabled) Nov 26 19:02:28 barney kernel: bt0: not probed (disabled) Nov 26 19:02:28 barney kernel: cs0: not probed (disabled) Nov 26 19:02:28 barney kernel: ed0: not probed (disabled) Nov 26 19:02:28 barney kernel: fe0: not probed (disabled) Nov 26 19:02:28 barney kernel: ie0: not probed (disabled) Nov 26 19:02:28 barney kernel: le0: not probed (disabled) Nov 26 19:02:28 barney kernel: lnc0: not probed (disabled) Nov 26 19:02:28 barney kernel: pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 Nov 26 19:02:28 barney kernel: pcic1: not probed (disabled) Nov 26 19:02:28 barney kernel: sc0: <System console> at flags 0x100 on isa0 Nov 26 19:02:28 barney kernel: sc0: VGA <16 virtual consoles, flags=0x300> Nov 26 19:02:28 barney kernel: sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) Nov 26 19:02:28 barney kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Nov 26 19:02:28 barney kernel: sio1: port may not be enabled Nov 26 19:02:28 barney kernel: sio1: irq maps: 0 0 0 0 Nov 26 19:02:28 barney kernel: sio1: probe failed test(s): 0 1 2 4 6 7 9 Nov 26 19:02:28 barney kernel: sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 Nov 26 19:02:28 barney kernel: sio2: not probed (disabled) Nov 26 19:02:28 barney kernel: sio3: not probed (disabled) Nov 26 19:02:28 barney kernel: sn0: not probed (disabled) Nov 26 19:02:28 barney kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Nov 26 19:02:28 barney kernel: fb0: vga0, vga, type:VGA (5), flags:0x7007f Nov 26 19:02:28 barney kernel: fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 Nov 26 19:02:28 barney kernel: fb0: init mode:24, bios mode:3, current mode:24 Nov 26 19:02:28 barney kernel: fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k Nov 26 19:02:28 barney kernel: VGA parameters upon power-up Nov 26 19:02:28 barney kernel: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 Nov 26 19:02:28 barney kernel: bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 Nov 26 19:02:28 barney kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c Nov 26 19:02:28 barney kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff Nov 26 19:02:28 barney kernel: VGA parameters in BIOS for mode 24 Nov 26 19:02:28 barney kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 Nov 26 19:02:28 barney kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 Nov 26 19:02:28 barney kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c Nov 26 19:02:28 barney kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff Nov 26 19:02:28 barney kernel: EGA/VGA parameters to be used for mode 24 Nov 26 19:02:28 barney kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 Nov 26 19:02:28 barney kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 Nov 26 19:02:28 barney kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c Nov 26 19:02:28 barney kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff Nov 26 19:02:28 barney kernel: vt0: not probed (disabled) Nov 26 19:02:28 barney kernel: isa_probe_children: probing PnP devices Nov 26 19:02:28 barney kernel: Device configuration finished. Nov 26 19:02:28 barney kernel: procfs registered Nov 26 19:02:28 barney kernel: Timecounter "TSC" frequency 1699952108 Hz quality 800 Nov 26 19:02:28 barney kernel: Timecounters tick every 10.000 msec Nov 26 19:02:28 barney kernel: lo0: bpf attached Nov 26 19:02:28 barney kernel: ata0: spurious interrupt - status=0x50 error=0x00 Nov 26 19:02:28 barney kernel: acpi_cpu0: set speed to 100.0% Nov 26 19:02:28 barney kernel: acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% Nov 26 19:02:28 barney kernel: ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin Nov 26 19:02:28 barney kernel: ata0-master: setting PIO4 on Intel ICH4 chip Nov 26 19:02:28 barney kernel: acd0: <TEAC CD-552E/VER 1.00> CDROM drive at ata0 as master Nov 26 19:02:28 barney kernel: acd0: read 8958KB/s (8958KB/s), 128KB buffer, PIO4 Nov 26 19:02:28 barney kernel: acd0: Reads: CDR, CDRW, CDDA stream, packet Nov 26 19:02:28 barney kernel: acd0: Writes: Nov 26 19:02:28 barney kernel: acd0: Audio: play, 256 volume levels Nov 26 19:02:28 barney kernel: acd0: Mechanism: ejectable tray, unlocked Nov 26 19:02:28 barney kernel: acd0: Medium: no/blank disc Nov 26 19:02:28 barney kernel: ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin Nov 26 19:02:28 barney kernel: GEOM: create disk ad4 dp=0xc6b78660 Nov 26 19:02:28 barney kernel: ad4: <Maxtor 6Y120M0/YAR51BW0> ATA-7 disk at ata2-master Nov 26 19:02:28 barney kernel: ad4: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B Nov 26 19:02:28 barney kernel: ad4: 16 secs/int, 1 depth queue, UDMA133 Nov 26 19:02:28 barney kernel: GEOM: new disk ad4 Nov 26 19:02:28 barney kernel: ar: FreeBSD check1 failed Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 1 (IRQ 1) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 4 (IRQ 4) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 6 (IRQ 6) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 7 (IRQ 7) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 8 (IRQ 8) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 9 (IRQ 9) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 12 (IRQ 12) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 13 (IRQ 13) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 14 (IRQ 14) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 15 (IRQ 15) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 16 (IRQ 16) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 18 (IRQ 18) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 19 (IRQ 19) to cluster 0 Nov 26 19:02:28 barney kernel: ioapic0: routing intpin 20 (IRQ 20) to cluster 0 Nov 26 19:02:28 barney kernel: [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20482812 Nov 26 19:02:28 barney kernel: [1] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20482875 l:102414375 Nov 26 19:02:28 barney kernel: [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:122897250 l:117210240 Nov 26 19:02:28 barney kernel: [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s1, start 32256 length 10487199744 end 10487231999 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s2, start 10487232000 length 52436160000 end 62923391999 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s3, start 62923392000 length 60011642880 end 122935034879 Nov 26 19:02:28 barney kernel: MBREXT Slice 5 on ad4s2: Nov 26 19:02:28 barney kernel: [0] f:00 typ:7 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:90124587 Nov 26 19:02:28 barney kernel: [1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:90124650 l:12289725 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s5, start 32256 length 46143788544 end 46143820799 Nov 26 19:02:28 barney kernel: MBREXT Slice 6 on ad4s2: Nov 26 19:02:28 barney kernel: [0] f:00 typ:7 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:12289662 Nov 26 19:02:28 barney kernel: [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s6, start 46143853056 length 6292306944 end 52436159999 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s3a, start 0 length 5368709120 end 5368709119 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s3b, start 5368709120 length 5368709120 end 10737418239 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s3c, start 0 length 60011642880 end 60011642879 Nov 26 19:02:28 barney kernel: GEOM: Configure ad4s3d, start 10737418240 length 49274224640 end 60011642879 Nov 26 19:02:28 barney kernel: Mounting root from ufs:/dev/ad4s3a Nov 26 19:02:28 barney kernel: start_init: trying /sbin/init Nov 26 19:02:38 barney login: ROOT LOGIN (root) ON ttyv0 Nov 26 19:03:32 barney kernel: pid 539 (fsck), uid 0: exited on signal 11 (core dumped) Nov 26 19:03:32 barney fsck: Segmentation fault (core dumped) Nov 26 19:04:17 barney login: ROOT LOGIN (root) ON ttyv1Received on Wed Nov 26 2003 - 17:48:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:31 UTC