Re: no /dev/dsp.x

From: Robert Watson <rwatson_at_freebsd.org>
Date: Fri, 28 Nov 2003 23:27:00 -0500 (EST)
On Fri, 28 Nov 2003, T Kellers wrote:

> I can't ssh to the laptop at this moment, but if the sound card is not
> detected by the kernel, can I force the detection by editing /boot/
> loader.conf with: 
> 
> userconfig_script_load="YES"
> snd_maestro3_load="YES"
> ?
> 
> I have that in loader.conf on an identical laptop running 4.9-STABLE, and on 
> that laptop:
> 
> > dmesg -a | grep pcm
> Preloaded elf module "snd_pcm.ko" at 0xc0588140.
> pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem 0xf8ffe000-0xf8ffffff 
> irq 5 at device 3.0 on pci2
> pcm0: <SigmaTel STAC9721/23 AC97 Codec>
> Preloaded elf module "snd_pcm.ko" at 0xc0588140.
> pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem 0xf8ffe000-0xf8ffffff 
> irq 5 at device 3.0 on pci2
> pcm0: <SigmaTel STAC9721/23 AC97 Codec>
> 
> I suppose on the 5.2-BETA laptop I should see something similar?

I'm running 5.1-CURRENT from about a month ago on my notebook right now,
and it sounds like I have almost identical hardware (Dell C600, etc). 

paprika:/boot> dmesg | grep -i pcm
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0aa8280.
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem
0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0aa8280.
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem
0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>

I have the following in my loader.conf:

paprika:/boot> grep -i maes /boot/loader.conf 
snd_maestro3_load="YES"

I'm about to update to 5.2-BETA on the notebook; I'm running 5.1-CURRENT
with some modifications to ACPI to make it like my configuration better
(the old Dell notebook patch that's floating around).  I don't believe
that patch applies in the new world order, so once I update my notebook
tomorrow, I'll see if I have the same problem.  It looks like most of that
patch has been applied to the vendor ACPI code, so I'm hopeful it won't
:-).  You might try disabling ACPI in device.hints and see if your sound
device "magically appears". 

Robert N M Watson             FreeBSD Core Team, TrustedBSD Projects
robert_at_fledge.watson.org      Senior Research Scientist, McAfee Research
Received on Fri Nov 28 2003 - 19:29:39 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:31 UTC