If acpi enabled PS/2 mouse failed to work and irq12 cold't attach to psmintr. Is this problem "reporting PS/2 mouse resource before atkbdc"? psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vmstat -i interrupt total rate irq0: clk 64245 99 irq1: atkbd0 1 0 irq8: rtc 82235 127 irq11: xl0 uhci0+ 737 1 irq13: npx0 1 0 irq14: ata0 2411 3 irq15: ata1 52 0 Total 149682 232 Device (PS2M) { Name (_HID, EisaId ("PNP0F13")) Method (_STA, 0, NotSerialized) { If (LEqual (PS2F, 0x00)) { Return (0x0F) } Else { Return (0x00) } } Method (_CRS, 0, NotSerialized) { Name (BUF1, Buffer (0x05) { 0x22, 0x00, 0x10, 0x79, 0x00 }) Name (BUF2, Buffer (0x15) { 0x47, 0x01, 0x60, 0x00, 0x60, 0x00, 0x01, 0x01, 0x47, 0x01, 0x64, 0x00, 0x64, 0x00, 0x01, 0x01, 0x22, 0x00, 0x10, 0x79, 0x00 }) If (LEqual (KBDI, 0x01)) { Return (BUF2) } Else { Return (BUF1) } } } Device (PS2K) { Name (_HID, EisaId ("PNP0303")) Method (_STA, 0, NotSerialized) { If (LEqual (KBDI, 0x01)) { Return (0x00) } Else { Return (0x0F) } } Name (_CRS, Buffer (0x15) { 0x47, 0x01, 0x60, 0x00, 0x60, 0x00, 0x01, 0x01, 0x47, 0x01, 0x64, 0x00, 0x64, 0x00, 0x01, 0x01, 0x22, 0x02, 0x00, 0x79, 0x00 }) } -- Slawa OlhovchenkovReceived on Sun Nov 30 2003 - 13:45:35 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:32 UTC