В вт, 07.10.2003, в 23:26, Soren Schmidt пишет: > It seems Vladimir B. Grebenschikov wrote: > > > Any solution or workaround ? > > Try this patch please: > > diff -u -r1.191 ata-all.c Does not help, another panic in ad_attach: ... GEOM: create disk ad1 dp=0xc2358a70 ad1: <MEMORYSTICK 4M 8K/SONY1.00> ATA-0 disk at ata1-master ad1: 3MB (7904 sectors), 247 C, 2 H, 16 S, 512 B ad1: 1 secs/int, 1 depth queue, BIOSPIO Fatal trap 12: page fault while in kernel mode fault virtual address = 0x6 fault code = supervisor read, page not present instruction pointer = 0x8:0xc047d801 stack pointer = 0x10:0xc0c21cf4 frame pointer = 0x10:0xc0c21d3c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) kernel: type 12 trap, code=0 Stopped at ad_attach+0x61: movzbl 0x6(%edi),%ecx db> tra ad_attach(c227d2d4,1,c1122c50,c074a990,c0c21d74) at ad_attach+0x61 ata_boot_attach(0,c0539736,c0768fec,0,c074a990) at ata_boot_attach+0x6f run_interrupt_driven_config_hooks(0,0,c1120708,c1120708,c1ec00) at run_interrupt_driven_config_hooks+0x2b mi_startup() at mi_startup+0xa1 begin() at begin+0x2c db> full boot -v: OK boot -v /boot/kernel.soren/acpi.ko text=0x3b43c data=0x16cc+0xee0 syms=[0x4+0x6480+0x4+0x7fb5] SMAP type=01 base=0000000000000000 len=000000000009f800 SMAP type=02 base=000000000009f800 len=0000000000000800 SMAP type=02 base=00000000000e7800 len=0000000000018800 SMAP type=01 base=0000000000100000 len=000000000bef0000 SMAP type=03 base=000000000bff0000 len=000000000000f800 SMAP type=04 base=000000000bfff800 len=0000000000000800 SMAP type=02 base=00000000fffe7800 len=0000000000018800 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #11: Wed Oct 8 03:00:25 MSD 2003 root_at_vbook.fbsd.ru:/usr/obj/usr/src/sys/VBOOK Preloaded elf kernel "/boot/kernel.soren/kernel" at 0xc08a8000. Preloaded elf module "/boot/kernel.soren/ums.ko" at 0xc08a8208. Preloaded elf module "/boot/kernel.soren/usb.ko" at 0xc08a82b8. Preloaded elf module "/boot/kernel.soren/ukbd.ko" at 0xc08a8368. Preloaded elf module "/boot/kernel.soren/snd_neomagic.ko" at 0xc08a8418. Preloaded elf module "/boot/kernel.soren/snd_pcm.ko" at 0xc08a84d0. Preloaded elf module "/boot/kernel.soren/acpi.ko" at 0xc08a8584. Calibrating clock(s) ... i8254 clock: 1193111 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 331580921 Hz CPU: Pentium II/Pentium II Xeon/Celeron (331.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201261056 (191 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000000bc69fff, 184827904 bytes (45124 pages) avail memory = 185966592 (177 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6c50 bios32: Entry = 0xfd7c0 (c00fd7c0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd7c0+0x214 pnpbios: Found PnP BIOS data at 0xc00f6c80 pnpbios: Entry = f0000:b5d4 Rev = 1.0 Other BIOS signatures found: random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <SONY Z0 > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b54 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fdf50 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x60 9 embedded 0 1 B 0x61 9 embedded 0 1 C 0x62 9 embedded 0 1 D 0x63 9 embedded 0 7 D 0x63 9 embedded 0 8 A 0x60 9 embedded 0 8 B 0x61 9 embedded 0 9 A 0x62 9 embedded 0 10 A 0x61 9 embedded 0 11 A 0x60 9 embedded 0 6 A 0x60 9 AcpiOsDerivePciId: bus 0 dev 7 func 2 AcpiOsDerivePciId: bus 0 dev 10 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 3, max = 16777202, width = 16777199 ACPI timer looks BAD min = 3, max = 8, width = 5 ACPI timer looks BAD min = 3, max = 9, width = 6 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 0, max = 8, width = 8 ACPI timer looks BAD min = 3, max = 8, width = 5 ACPI timer looks BAD min = 3, max = 8, width = 5 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0 \_SB_.LNKC irq 0: [ 9] low,level,sharable 0.9.0 \_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0 \_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0 ---- before setting priority for links ------------ \_SB_.LNKC: interrupts: 9 penalty: 710 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \_SB_.LNKC: interrupts: 9 penalty: 710 references: 1 priority: 710 ---- after fixup boot-disabled links -------------- \_SB_.LNKC: interrupts: 9 penalty: 710 references: 1 priority: 710 ---- arbitrated configuration --------------------- \_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0 \_SB_.LNKC irq 0: [ 9] low,level,sharable 0.9.0 \_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0 \_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base 00000000, size 26, enabled found-> vendor=0x8086, dev=0x7192, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0xa200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base fecff000, size 12, enabled map[14]: type 4, range 32, base 0000fcc0, size 6, enabled map[18]: type 1, range 32, base fed00000, size 20, enabled pcib0: matched entry for 0.6.INTA (source \_SB_.LNKA) pcib0: slot 6 INTA is routed to irq 9 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fcb0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fc60, size 5, enabled pcib0: matched entry for 0.7.INTD (source \_SB_.LNKD) pcib0: slot 7 INTD is routed to irq 9 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 map[90]: type 4, range 32, base 00002180, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base fe400000, size 22, enabled map[18]: type 1, range 32, base feb00000, size 20, enabled pcib0: matched entry for 0.8.INTA (source \_SB_.LNKA) pcib0: slot 8 INTA is routed to irq 9 found-> vendor=0x10c8, dev=0x0005, revid=0x20 bus=0, slot=8, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base fe000000, size 22, enabled map[14]: type 1, range 32, base fea00000, size 20, enabled pcib0: matched entry for 0.8.INTB (source \_SB_.LNKB) pcib0: slot 8 INTB is routed to irq 9 found-> vendor=0x10c8, dev=0x8005, revid=0x20 bus=0, slot=8, func=1 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base fecfec00, size 9, memory disabled found-> vendor=0x104d, dev=0x8009, revid=0x01 bus=0, slot=9, func=0 class=0c-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D3 current D0 found-> vendor=0x1180, dev=0x0475, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fece0000, size 16, memory disabled map[14]: type 4, range 32, base 0000fca8, size 3, port disabled found-> vendor=0x127a, dev=0x2005, revid=0x01 bus=0, slot=11, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D3 pci0: <network, ethernet> at device 6.0 (no driver attached) PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2 uhub1: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse╝ Explorer, rev 1.10/1.14, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 4, iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums1: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 4, iclass 3/1 ums1: 3 buttons intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 2180 intpm0: intr IRQ 9 enabled revision 0 intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 intpm0: PM I/O mapped 8000 pci0: <display, VGA> at device 8.0 (no driver attached) pcm0: <NeoMagic 256AV> mem 0xfea00000-0xfeafffff,0xfe000000-0xfe3fffff irq 9 at device 8.1 on pci0 pcm0: buftop is 0x0027ec00 pcm0: buftop is changed to 0x0027ec00 pcm0: <Asahi Kasei AK4542 AC97 Codec (id = 0x414b4d01)> pcm0: Codec features headphone, 5 bit master volume, AKM 3D Audio pcm0: rec buf 0xcbcf7c00 pcm0: play buf 0xcbcf3c00 pci0: <serial bus, FireWire> at device 9.0 (no driver attached) pci0: <bridge, PCI-CardBus> at device 10.0 (no driver attached) pci0: <simple comms> at device 11.0 (no driver attached) speaker0 port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 53 02 14 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0x201 0x601 0x201 0x201 sio1 port 0x140-0x147,0x3e8-0x3ef irq 10 drq 0 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff ed0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 331580921 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited DUMMYNET initialized (011031) ata1: spurious interrupt - status=0x50 error=0x01 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad0 dp=0xc22daa70 ad0: <TOSHIBA MK4019GAX/FA002D> ATA-5 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):969/239/63 s:63 l:14666337 [1] f:00 typ:160 s(CHS):970/0/1 e(CHS):996/239/63 s:14666400 l:408240 [2] f:80 typ:165 s(CHS):997/0/1 e(CHS):1023/239/63 s:15074640 l:41942880 [3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/239/63 s:57017520 l:21122640 GEOM: Configure ad0s1, start 32256 length 7509164544 end 7509196799 GEOM: Configure ad0s2, start 7509196800 length 209018880 end 7718215679 GEOM: Configure ad0s3, start 7718215680 length 21474754560 end 29192970239 GEOM: Configure ad0s4, start 29192970240 length 10814791680 end 40007761919 GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727 GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183 GEOM: Configure ad0s3c, start 0 length 21474754560 end 21474754559 GEOM: Configure ad0s3e, start 402653184 length 6442450944 end 6845104127 GEOM: Configure ad0s3f, start 6845104128 length 14629650432 end 21474754559 GEOM: Configure ad0s4c, start 0 length 10814791680 end 10814791679 GEOM: Configure ad0s4e, start 0 length 134217728 end 134217727 GEOM: Configure ad0s4f, start 134217728 length 8915517440 end 9049735167 ata1-master: pio=0x09 wdma=0xffffffff udma=0xffffffff cable=40pin ad1: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED> ad1: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED> ad1: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED> ad1: FAILURE setting PIO1 on Intel PIIX4 chip GEOM: create disk ad1 dp=0xc2358a70 ad1: <MEMORYSTICK 4M 8K/SONY1.00> ATA-0 disk at ata1-master ad1: 3MB (7904 sectors), 247 C, 2 H, 16 S, 512 B ad1: 1 secs/int, 1 depth queue, BIOSPIO Fatal trap 12: page fault while in kernel mode fault virtual address = 0x6 fault code = supervisor read, page not present instruction pointer = 0x8:0xc047d801 stack pointer = 0x10:0xc0c21cf4 frame pointer = 0x10:0xc0c21d3c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) kernel: type 12 trap, code=0 Stopped at ad_attach+0x61: movzbl 0x6(%edi),%ecx db> tra ad_attach(c227d2d4,1,c1122c50,c074a990,c0c21d74) at ad_attach+0x61 ata_boot_attach(0,c0539736,c0768fec,0,c074a990) at ata_boot_attach+0x6f run_interrupt_driven_config_hooks(0,0,c1120708,c1120708,c1ec00) at run_interrupt_driven_config_hooks+0x2b mi_startup() at mi_startup+0xa1 begin() at begin+0x2c db> > -Søren -- Vladimir B. Grebenschikov <vova_at_fbsd.ru> SWsoft Inc.Received on Tue Oct 07 2003 - 22:36:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:24 UTC