Re: no driver attached messsage

That is because there is no driver for that specific hardware. If 
FreeBSD supports them, you need to recompile kernel with appropriate 
drivers or dynamically load them. As for the unsupported devices, (like 
winmodems), you can't help it.

-- Babak Farrokhi

Dikshie wrote:

>why my dmesg always show "no driver attached"   ?
>the mainboard is intel server board S875WP1-E 
>
>
>
>with best regards,
>
>-dikshie-
>
>-----------------------------------------------------------------------------------------------
>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.1-CURRENT-20031001-JPSNAP #0: Wed Oct  1 00:54:54 GMT 2003
>    root_at_ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc0761000.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0761244.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Hyperthreading: 2 logical CPUs
>real memory  = 267583488 (255 MB)
>avail memory = 251961344 (240 MB)
>Pentium Pro MTRR support enabled
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <INTEL  S875PWP1> on motherboard
>pcibios: BIOS version 2.10
>Using $PIR table, 12 entries at 0xc00f3310
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_cpu1: <CPU> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib0: slot 29 INTA is routed to irq 5
>pcib0: slot 29 INTB is routed to irq 10
>pcib0: slot 29 INTC is routed to irq 10
>pcib0: slot 29 INTA is routed to irq 5
>pcib0: slot 29 INTD is routed to irq 9
>pcib0: slot 31 INTA is routed to irq 10
>pcib0: slot 31 INTB is routed to irq 11
>agp0: <Intel 82875P host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>pcib2: slot 1 INTA is routed to irq 10
>em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xac00-0xac1f mem 0xfc9e0000-0xfc9fffff irq 10 at device 1.0 on pci2
>em0:  Speed:N/A  Duplex:N/A
>uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 5 at device 29.0 on pci0
>usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq 10 at device 29.1 on pci0
>usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq 10 at device 29.2 on pci0
>usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 5 at device 29.3 on pci0
>usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
>usb3: USB revision 1.0
>uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub3: 2 ports with 2 removable, self powered
>pci0: <serial bus, USB> at device 29.7 (no driver attached)
>pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib3: slot 1 INTA is routed to irq 11
>pcib3: slot 6 INTA is routed to irq 11
>pcib3: slot 8 INTA is routed to irq 11
>ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xb400-0xb4ff mem 0xfeafe000-0xfeafefff irq 11 at device 1.0 on pci3
>aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>pci3: <display, VGA> at device 6.0 (no driver attached)
>fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xbc00-0xbc3f mem 0xfeafd000-0xfeafdfff irq 11 at device 8.0 on pci3
>fxp0: Ethernet address 00:07:e9:45:69:3d
>miibus0: <MII bus> on fxp0
>inphy0: <i82562ET 10/100 media interface> on miibus0
>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata0: [MPSAFE]
>ata1: at 0x170 irq 15 on atapci0
>ata1: [MPSAFE]
>pci0: <mass storage, RAID> at device 31.2 (no driver attached)
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_button0: <Sleep Button> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model IntelliMouse, device ID 3
>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0 port 0x3f8-0x3ff irq 4 on acpi0
>sio0: type 16550A
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1 port 0x2f8-0x2ff irq 3 on acpi0
>sio1: type 16550A
>ppc0 port 0x378-0x37f irq 7 on acpi0
>ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
>pmtimer0 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounter "TSC" frequency 2394011720 Hz quality 800
>Timecounters tick every 10.000 msec
>acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
>acd0: CDROM <CD-540E> at ata1-slave PIO4
>Waiting 15 seconds for SCSI devices to settle
>GEOM: create disk da0 dp=0xc2704850
>da0 at ahc0 bus 0 target 0 lun 0
>da0: <COMPAQ BB00921B91 3B05> Fixed Direct Access SCSI-2 device
>da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
>da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
>Mounting root from ufs:/dev/da0s1a
>em0: Link is up 100 Mbps Full Duplex
>em0: Link is Down
>
>----- End forwarded message -----
>
>_______________________________________________
>freebsd-current_at_freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>
>
>  
>