A7N8X Deluxe Sata Driver Failure...

From: Evren Yurtesen <eyurtese_at_tekniikka.turkuamk.fi>
Date: Mon, 13 Oct 2003 13:39:44 +0300 (WET)
---------- Forwarded message ----------
Date: Mon, 13 Oct 2003 11:29:22 +0300 (WET)
From: Evren Yurtesen <eyurtese_at_bessel.tekniikka.turkuamk.fi>
To: freebsd-current_at_freebsd.org
Subject: latest current problems... more

ad4: WARNING - WRITE_MUL write data underrun 8192>2048
ad4: TIMEOUT - WRITE_MUL retrying (2 retries left)
ata2: resetting devices ..
GEOM: destroy disk ad4 dp=0xc5b4b470
ad4: WARNING - removed from configuration
done
ata2-master: FAILURE - WRITE_MUL device lockup/removed

Now when I disabled the ata dma, I receive these with the new current. I
wasnt receiving any such things before

---------- Forwarded message ----------
Date: Mon, 13 Oct 2003 11:24:12 +0300 (WET)
From: Evren Yurtesen <eyurtese_at_bessel.tekniikka.turkuamk.fi>
To: freebsd-current_at_freebsd.org
Subject: latest current problems...

I have a board Asus A7N8X...

I often receive the following error (I disabled DMA access now from
sysctl) Any ideas? or who should receive this information so that it might
be fixed. This same machine was working nicely with a previous version of
5.x-current

ad4: TIMEOUT_WRITE_DMA retrying (2 retries left)
ata2 reseting devices
GEOM destroy ..
ad4 dp=0Xc5646470
ad4: warninng removing from configuration.
ata3... 

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Mon Oct 13 01:00:45 EEST 2003
    toor_at_proxy.ispro.net.tr:/usr/obj/usr/src/sys/PROXY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0723000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0723244.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07232f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP (1746.83-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1

Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1610547200 (1535 MB)
avail memory = 1560543232 (1488 MB)
Pentium Pro MTRR support enabled
VESA: v1.2, 1024k memory, flags:0x0, mode table:0xc00c4f04 (c0004f04)
VESA: S3 Incorporated. 86C775/86C785
module_register_init: MOD_LOAD (splash_bmp, 0xc06d1810, 0) error 2
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdeb0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xe8000000-0xe9ffffff at device
0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:6 INTA BIOS irq 5
pci_cfgintr: 1:8 INTA BIOS irq 11
pci_cfgintr: 1:11 INTA BIOS irq 11
pci1: <display, VGA> at device 6.0 (no driver attached)
fxp0: <Intel 82551 Pro/100 Ethernet> port 0x9000-0x903f mem
0xe5000000-0xe501ffff,0xe5020000-0xe5020fff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:07:e9:0d:ea:4e
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <SiI 3112 SATA150 controller> port
0xa400-0xa40f,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 mem
0xe5021000-0xe50211ff irq 11 at device 11.0 on pci1
atapci0: [MPSAFE]
ata2: at 0xe5021000 on atapci0
ata2: [MPSAFE]
ata3: at 0xe5021000 on atapci0
ata3: [MPSAFE]
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device
9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pcib2: <PCIBIOS PCI-PCI bridge> at device 12.0 on pci0
pci2: <PCI bus> on pcib2
pci_cfgintr: 2:1 INTA BIOS irq 10
xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xb000-0xb07f mem
0xeb000000-0xeb00007f irq 10 at device 1.0 on pci2
xl0: Ethernet address: 00:26:54:10:ca:34
miibus1: <MII bus> on xl0
acphy0: <AC101L 10/100 media interface> on miibus1
acphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib3
pmtimer0 on isa0
orm0: <Option ROMs> at iomem
0xd1000-0xd17ff,0xcc000-0xd07ff,0xca000-0xcb7ff,0xc8000-0xc97ff,0xc0000-0xc7fff
on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default
to accept, logging disabled
GEOM: create disk ad0 dp=0xc5b4b670
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master PIO4
GEOM: create disk ad4 dp=0xc5b4b470
ad4: 114473MB <ST3120026AS> [232581/16/63] at ata2-master PIO4
GEOM: create disk ad6 dp=0xc5b4b370
ad6: 114473MB <ST3120026AS> [232581/16/63] at ata3-master PIO4
Received on Mon Oct 13 2003 - 01:39:51 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:25 UTC