Re: Burning in DAO mode broken

cdrecord doesn't work with DVD's
try dvdrecord instead

Pav Lucistnik wrote:
> Hi people,
> 
> I borrowed a DVD writer for this weekend and I'm a bit dissapointed
> because I found that I'm not able to write anything in DAO mode.
> Writing fails in sending CUE sheet with burncd, and just before writing
> first data with cdrecord. I have -CURRENT from Friday night (17th Oct
> 2003). Blanking works fine, TAO writing works fine. Can anyone write CD
> in DAO mode on -CURRENT?
> 
> 
> # burncd -vnd data data.bin
> adding type 0x08 file data.bin size 677280 KB 338640 blocks
> next writeable LBA 0
> CUE sheet:
> 41 00 00 14 00 00 02 00
> 41 01 01 10 00 00 04 00
> 41 aa 01 14 00 4b 13 0f
> burncd: ioctl(CDRIOCSENDCUE): Input/output error
> 
> and syslog have this:
> acd0: FAILURE - SEND_CUE_SHEET status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
> 
> <nothing got written on a CD>
> 
> 
> # cdrecord -dao data.bin
> [snip]
> Waiting for reader process to fill input buffer ... input buffer ready.
> trackno=0
> BURN-Free is ON.
> Performing OPC...
> Sending CUE sheet...
> cdrecord: WARNING: Drive returns wrong startsec (0) using -150
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> Track 01:    7 of  661 MB written (fifo  70%) [buf  94%] 139.1x.
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB:  2A 00 00 00 0E C6 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 200s
>  
> write track data: error after 7745536 bytes
> cdrecord: A write error occured.
> cdrecord: Please properly read the error message above.
> Writing  time:   13.510s
> Average write speed 831.9x.
> Fixating...
> cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
> CDB:  35 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 17.834s timeout 200s
> Trouble flushing the cache
> Fixating time:   17.835s
> cdrecord: fifo had 186 puts and 123 gets.
> cdrecord: fifo was 0 times empty and 1 times full, min fill was 65%.
> 
> <note that 7745536 is a size of burner's buffer. toc got written but no
> data, the CD is toasted>
> 
> 
> # cdrdao write toc
> [snip]
> Writing track 01 (mode MODE1/MODE1 )...
> ?: Input/output error.  : scsi sendcmd: retryable error
> CDB:  2A 00 00 00 0E DA 00 00 17 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.004s timeout 180s
> ERROR: Write data failed.
> ERROR: Writing failed - buffer under run?
> 
> <hangs in vmmaps state, toc written but no data, CD is toasted>
> 
> 
> dmesg:
> acd0: DVDR <SONY DVD RW DRU-510A> at ata1-master PIO4
> GEOM: create disk cd0 dp=0xc2d24600
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <SONY DVD RW DRU-510A 1.0d> Removable CD-ROM SCSI-0 device
> cd0: 16.000MB/s transfers
> cd0: cd present [145091 x 2048 byte records]
> 
>