Well, I tried the drivers from intel.com, but they are indeed for 4.x kernels and don't work on 5.1. An odd thing I noticed is that the driver in 5.1 has the same versionnumber as the driver on intel.com, but obviously isn't the same. Sysctl hw.em0.rx_int_delay was already on 0, so that didn't help either. I think I'll write to Intel support. -- Regards, Terrence Koeman MediaMonks B.V. (www.mediamonks.com) Please quote all replies in correspondence. ---------- Original Message ---------------------------------- From: "Will Froning" <wfroning_at_angui.sh> Date: Sat, 18 Oct 2003 20:27:28 -0700 (PDT) >Not sure if anyone has helped you on this, but I've been having this >problem for a while on 4.x with select chipsets. My solution is newer >drivers from intel.com. > >Sadly I don't think the drivers on intel.com will work for 5.1, but they >work great for 4.X. I just copy them to /usr/src/sys/drv/em and rebuild. >I wish I had more help, but I haven't moved my production boxes to 5.1 >yet. > >HTH, >Will > > >> Hi, >> >> I'm experiencing a problem with the em driver in 5.1-CURRENT for my Intel >> 1000/Pro fiber Gbit adapter. >> >> The following is recorded in the syslog: >> >> Oct 15 18:17:49 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 15 18:30:25 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 15 18:30:27 shaolin kernel: em0: Link is Down >> Oct 15 18:30:27 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 15 18:31:14 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 15 18:44:35 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 15 18:44:37 shaolin kernel: em0: Link is Down >> Oct 15 18:44:37 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 15 22:13:54 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 02:18:10 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 02:28:33 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 04:51:46 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 05:58:20 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 05:58:22 shaolin kernel: em0: Link is Down >> Oct 16 05:58:22 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 16 08:06:26 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 12:10:01 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 12:10:03 shaolin kernel: em0: Link is Down >> Oct 16 12:10:04 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 16 13:44:00 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 13:44:02 shaolin kernel: em0: Link is Down >> Oct 16 13:44:02 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 16 14:25:31 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 14:27:01 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 14:28:41 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 14:28:43 shaolin kernel: em0: Link is Down >> Oct 16 14:28:44 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 16 14:43:30 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 14:46:57 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 14:46:59 shaolin kernel: em0: Link is Down >> Oct 16 14:46:59 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 16 14:51:17 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 14:51:43 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 14:51:45 shaolin kernel: em0: Link is Down >> Oct 16 14:51:45 shaolin kernel: em0: Link is up 1000 Mbps Full Duplex >> Oct 16 14:53:32 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 15:15:44 shaolin kernel: em0: watchdog timeout -- resetting >> Oct 16 15:28:33 shaolin kernel: em0: watchdog timeout -- resetting >> >> Everytime it does that connectivity is lost for 2-3 minutes. >> >> I have found a similar problem at >> http://lists.freebsd.org/pipermail/freebsd-stable/2003-April/000539.html >> but that problem seems to be solved long ago, and the fix described in the >> thread doesn't help me. >> >> I have tried to use some older drivers, but none would solve the problem. >> >> Does anyone have an idea how to solve this? >> >> Thanks in advance! >> >> dmesg: >> >> FreeBSD 5.1-CURRENT #12: Mon Oct 13 23:34:55 CEST 2003 >> root_at_shaolin.mediamonks.net:/usr/obj/usr/src/sys/SHAOLIN >> Preloaded elf kernel "/boot/kernel/kernel" at 0xc040d000. >> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc040d1cc. >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> CPU: Intel Pentium III (601.37-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0x681 Stepping = 1 >> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> >> real memory = 1073725440 (1023 MB) >> avail memory = 1038782464 (990 MB) >> Pentium Pro MTRR support enabled >> npx0: [FAST] >> npx0: <math processor> on motherboard >> npx0: INT 16 interface >> acpi0: <ASUS P3B_F > on motherboard >> pcibios: BIOS version 2.10 >> Using $PIR table, 8 entries at 0xc00f0e80 >> acpi0: Power Button (fixed) >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 >> acpi_cpu0: <CPU> on acpi0 >> acpi_button0: <Power Button> on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib0: slot 9 INTA is routed to irq 12 >> pcib1: <PCI-PCI bridge> at device 1.0 on pci0 >> pci1: <PCI bus> on pcib1 >> isab0: <PCI-ISA bridge> at device 4.0 on pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <Intel PIIX4 UDMA33 controller> port 0xd800-0xd80f at device 4.1 >> on pci0 >> ata0: at 0x1f0 irq 14 on atapci0 >> ata0: [MPSAFE] >> ata1: at 0x170 irq 15 on atapci0 >> ata1: [MPSAFE] >> pci0: <serial bus, USB> at device 4.2 (no driver attached) >> pci0: <bridge, PCI-unknown> at device 4.3 (no driver attached) >> pci0: <display, VGA> at device 9.0 (no driver attached) >> xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem >> 0xe5800000-0xe580007f at device 10.0 on pci0 >> pcib0: slot 10 INTA is routed to irq 9 >> xl0: Ethernet address: 00:04:76:9b:e7:b4 >> miibus0: <MII bus> on xl0 >> xlphy0: <3Com internal media interface> on miibus0 >> xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> mem >> 0xe5000000-0xe501ffff at device 12.0 on pci0 >> pcib0: slot 12 INTA is routed to irq 11 >> em0: Speed:1000 Mbps Duplex:Full >> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port >> 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 >> fdc0: FIFO enabled, 8 bytes threshold >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> sio0 port 0x3f8-0x3ff irq 4 on acpi0 >> sio0: type 16550A >> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 >> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 >> sc0: <System console> on isa0 >> sc0: VGA <16 virtual consoles, flags=0x200> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> Timecounter "TSC" frequency 601366241 Hz quality 800 >> Timecounters tick every 1.000 msec >> ipfw2 initialized, divert enabled, rule-based forwarding enabled, default >> to accept, logging limited to 20 packets/entry by default >> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% >> GEOM: create disk ad0 dp=0xc628d770 >> ad0: 14324MB <QUANTUM FIREBALLP LM15> [29104/16/63] at ata0-master UDMA33 >> acd0: CDROM <IDE/ATAPI CD-ROM 50XS> at ata1-master PIO4 >> Mounting root from ufs:/dev/ad0s1a >> >> -- >> Regards, >> Terrence Koeman >> >> MediaMonks B.V. (www.mediamonks.com) >> Please quote all replies in correspondence. >> >> _______________________________________________ >> freebsd-current_at_freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >> > > >-- >Will Froning >Sys Admin, Lt. Pimp >wfroning_at_angui.sh >Received on Mon Oct 20 2003 - 02:40:51 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:26 UTC