Greg 'groggy' Lehey schrieb: > Provide a dump? Analyse the problem yourself? This *is* -CURRENT, > after all. I can reproduce this here (same MB). I don't think it's a vinum problem, but vinum seems to be a good way to reproduce the bug. I set up a stripe over 2 SATA disks, newfs it, run "iozone -a" and BOOM. Using just one disk without vinum doesn't result in a panic, but with a verbose boot I see a lot of spurious interrupt messages while running iozone on one disk. The panic is: panic: ata_dmasetup: transfer active on this disk. Backtrace: ata_dmastart ata_pci_dmastart ata_transaction ata_start g_disk_start g_io_schedule_down g_down_procbody fork_exit fork_trampoline Trying to write a dump results in a hard hang of the system. The backtrace is with todays kernel source: ata-lowlevel 1.20 ata-pci.c 1.69 ata-queue.c 1.11 atapi-cd.c 1.149 Verbose dmesg attached (booted with an oct 17 kernel, if it's not enough, I rebuild the kernel with a larger message buffer). Greg, I don't know if the following is ATA related: I'm able to fdisk and disklabel the disks without any prolems, and the label survives a reboot, but rebooting after setting up the stripe results in a lost configuration, only the names of the drives show up with "vinum l", everything else is "clean" (0 volumes, 0 plexes, 0 subdisks). The config is: ---snip--- drive SATA1 device /dev/ad1s1a drive SATA2 device /dev/ad2s1a volume space setupstate plex org striped 279k sd length 0 drive SATA1 sd length 0 drive SATA2 ---snip--- S/oren, one additional datapoint: With the oct 17 kernel I've seen the following output with a verbose boot before it hunged hard (I had DDB_UNATTENDED in the oct 17 kernel): - spurious interrupt messages for ata 0 and 2 - WARNING FLUSHCASHE for ad0 - WARNING WRITE_DMA recovered from missing int for ad1 - TIMEOUT WRITE_DMA retrying for ad2 - ata3 reset tp1 mask=03 ostat0=d0 ostat1=00 ---snip--- Feel free to use me as an testing-ape, I also can provide a root login to this machine if needed (just tell me and I grab the ssh key from freefall). Bye, Alexander. ngnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2571, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ef00, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 10 found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 0000ef20, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 5 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type 4, range 32, base 0000ef40, size 5, enabled pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) pcib0: slot 29 INTC is routed to irq 5 found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type 4, range 32, base 0000ef80, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 10 found-> vendor=0x8086, dev=0x24de, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type 1, range 32, base febff800, size 10, enabled pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH) pcib0: slot 29 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 0000fc00, size 4, enabled found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000efe0, size 3, enabled map[14]: type 4, range 32, base 0000efac, size 2, enabled map[18]: type 4, range 32, base 0000efa0, size 3, enabled map[1c]: type 4, range 32, base 0000efa8, size 2, enabled map[20]: type 4, range 32, base 0000ef60, size 4, enabled pcib0: matched entry for 0.31.INTA (source \\_SB_.LNKC) pcib0: slot 31 INTA is routed to irq 5 found-> vendor=0x8086, dev=0x24d1, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type 4, range 32, base 00000400, size 5, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 4, range 32, base 0000ee80, size 6, enabled map[18]: type 1, range 32, base febff400, size 9, enabled map[1c]: type 1, range 32, base febff000, size 8, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24d5, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfe900000-0xfe9fffff pcib1: prefetched decode 0xd7f00000-0xf7efffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 28, enabled map[14]: type 4, range 32, base 0000c000, size 8, enabled map[18]: type 1, range 32, base fe9f0000, size 16, enabled found-> vendor=0x1002, dev=0x5964, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 10 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 5 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 5 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 10 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 11 at device 29.7 on pci0 ehci0: (New EHCI DeviceId=0x24dd8086) ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfea00000-0xfeafffff pcib2: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.8.0 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.0 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.1 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.2 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.3 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.0 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.1 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.2 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.3 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.0 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.1 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.2 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.3 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.0 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.1 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.3 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.0 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.1 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.2 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.3 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.5.0 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.3.0 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.4.0 ---- before setting priority for links ------------ \\_SB_.LNKE: interrupts: 3 4 5 6 7 10 11 12 14 15 penalty: 2320 2320 1820 2320 2320 1620 2920 2320 11320 11320 references: 7 priority: 0 \\_SB_.LNKF: interrupts: 3 4 5 6 7 10 11 12 14 15 penalty: 2320 2320 1820 2320 2320 1620 2920 2320 11320 11320 references: 5 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKE: interrupts: 3 4 5 6 7 10 11 12 14 15 penalty: 2320 2320 1820 2320 2320 1620 2920 2320 11320 11320 references: 7 priority: 28420 \\_SB_.LNKF: interrupts: 3 4 5 6 7 10 11 12 14 15 penalty: 2320 2320 1820 2320 2320 1620 2920 2320 11320 11320 references: 5 priority: 20300 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKE irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.8.0 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.0 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.1 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.2 \\_SB_.LNKE irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.3 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.0 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.1 \\_SB_.LNKE irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.2 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.3 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.0 \\_SB_.LNKE irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.1 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.2 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.3 \\_SB_.LNKE irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.0 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.1 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.3 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.0 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.1 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.2 \\_SB_.LNKE irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.3 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.5.0 \\_SB_.LNKE irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.3.0 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.4.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base feafc000, size 14, enabled map[14]: type 4, range 32, base 0000d800, size 8, enabled pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKG) pcib2: slot 5 INTA is routed to irq 11 found-> vendor=0x10b7, dev=0x1700, revid=0x12 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 11 at device 5.0 on pci2 pcib2: device skc0 requested decoded memory range 0xfeafc000-0xfeafffff skc0: 3Com Gigabit LOM (3C940) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0c:6e:a0:f2:62 sk0: bpf attached miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=3e ostat1=50 ata1-master: stat=0x7f err=0x3d lsb=0x7f msb=0x7f ata1-slave: stat=0x90 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x90 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x90 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=7f stat1=00 devices=0x8<ATAPI_SLAVE> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] atapci1: <Intel ICH5 SATA150 controller> port 0xef60-0xef6f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 5 at device 31.2 on pci0 atapci1: [MPSAFE] ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: at 0xefe0 on atapci1 ata2: [MPSAFE] ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: at 0xefa0 on atapci1 ata3: [MPSAFE] ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x400-0x41f irq 11 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ unknown: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) fdc: fdc0 already exists; skipping it ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it ppc: ppc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) bt0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vt0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) ed0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) ie0: not probed (disabled) fe0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 2398860468 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached Linux ELF exec handler installed ata1: spurious interrupt - status=0x00 error=0x01 acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ad0: setting UDMA100 on Intel ICH5 chip GEOM: create disk ad0 dp=0xc66b1870 ad0: <Maxtor 6Y080L0/YAR41BW0> ATA-7 disk at ata0-master ad0: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: setting PIO4 on Intel ICH5 chip acd0: <JLMS XJ-HD165H/CH11> DVDROM drive at ata1 as slave acd0: read 8268KB/s (8268KB/s), 512KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata3: spurious interrupt - status=0x00 error=0x01 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x00 error=0x01 ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata3: spurious interrupt - status=0x00 error=0x01 ata3: spurious interrupt - status=0x00 error=0x01 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x00 error=0x01 ata3: spurious interrupt - status=0x00 error=0x01 ata3: spurious interrupt - status=0x00 error=0x01 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x00 error=0x01 ata3: spurious interrupt - status=0x00 error=0x01 ata3: spurious interrupt - status=0x00 error=0x01 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x00 error=0x01 ata3: spurious interrupt - status=0x00 error=0x01 ata3: spurious interrupt - status=0x00 error=0x01 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x00 error=0x01 ad1: setting UDMA133 on Intel ICH5 chip GEOM: create disk ad1 dp=0xc66b1470 ad1: <Maxtor 6Y080M0/YAR51BW0> ATA-7 disk at ata2-master ad1: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA133 ata3: spurious interrupt - status=0x00 error=0x01 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/3/63 s:63 l:160071597 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0ata3: spurious interrupt - status=0x00 error=0x01 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 81956657664 end 81956689919 ar: FreeBSD check1 failed GEOM: new disk ad1 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ad2: setting UDMA133 on Intel ICH5 chip GEOM: create disk ad2 dp=0xc66b1070 ad2: <Maxtor 6Y080M0/YAR51BW0> ATA-7 disk at ata3-master ad2: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA133 ata2: spurious interrupt - status=0x50 error=0x00 GEOM: Configure ad0s1a, start 0 length 2147483648 end 2147483647 GEOM: Configure ad0s1b, start 79456894976 length 2499762688 end 81956657663 GEOM: Configure ad0s1c, start 0 length 81956657664 end 81956657663 GEOM: Configure ad0s1d, start 2147483648 length 77309411328 end 79456894975 ar: FreeBSD check1 failed ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:160071597 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 81956657664 end 81956689919 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 GEOM: new disk ad2 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 GEOM: Configure ad1s1a, start 0 length 81956657664 end 81956657663 GEOM: Configure ad1s1c, start 0 length 81956657664 end 81956657663 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:160071597 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 81956657664 end 81956689919 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 GEOM: Configure ad2s1a, start 0 length 81956657664 end 81956657663 GEOM: Configure ad2s1c, start 0 length 81956657664 end 81956657663 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata2: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 splash: image decoder found: green_saver ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 GEOM: Configure ad1s1a, start 0 length 81956657664 end 81956657663 GEOM: Configure ad1s1c, start 0 length 81956657664 end 81956657663 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00 ata3: spurious interrupt - status=0x50 error=0x00Received on Mon Oct 20 2003 - 08:03:17 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:26 UTC