I happily installed 5.1 on this laptop over the network using my NETGEAR FA410TX PCMCIA card, but on updating to -CURRENT the attach fails. Verbose boots from both 5.1-RELEASE and -CURRENT are appended, but the vital difference is this: ed1: <NETGEAR FA410TX> at port 0x100-0x11f irq 11 function 0 config 32 on pccard0 -ed1: bpf attached -ed1: address 00:48:54:c0:99:7b, type Linksys (16 bit) -miibus0: <MII bus> on ed1 -ukphy0: <Generic IEEE 802.3u media interface> on miibus0 -ukphy0: OUI 0x080017, model 0x0002, rev. 0 -ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto +device_probe_and_attach: ed1 attach returned 6 The card had also been working happily with various 4.x releases. Any ideas? Cheers, Mark. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 root_at_wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d41f4. Calibrating clock(s) ... i8254 clock: 1193161 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz Calibrating TSC clock ... TSC clock: 497838412 Hz Timecounter "TSC" frequency 497838412 Hz CPU: Intel Pentium III (497.84-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201261056 (191 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x00000000006fb000 - 0x000000000bc69fff, 190246912 bytes (46447 pages) avail memory = 188096512 (179 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6cf0 bios32: Entry = 0xfd8b0 (c00fd8b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd8b0+0x12f pnpbios: Found PnP BIOS data at 0xc00f6d20 pnpbios: Entry = f0000:ac81 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71948086) pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fdf60 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 10 A 0x61 3 4 5 7 9 10 11 15 embedded 0 11 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 12 A 0x63 3 4 5 7 9 10 11 15 embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 10 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz AcpiOsDerivePciId: bus 0 dev 0 func 0 can't fetch resources for \\_SB_.PCI0.ISA_.FIR_ - AE_AML_INVALID_RESOURCE_TYPE acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.ISA_.LNKB irq 11: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.12.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.ISA_.LNKB irq 11: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.12.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7194, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7198, revid=0x01 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001420, size 4, enabled found-> vendor=0x8086, dev=0x7199, revid=0x00 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001400, size 5, enabled found-> vendor=0x8086, dev=0x719a, revid=0x00 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00002180, size 4, enabled found-> vendor=0x8086, dev=0x719b, revid=0x00 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x000b, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base fd000000, size 24, enabled found-> vendor=0x126f, dev=0x0712, revid=0xa0 bus=0, slot=9, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x001f, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac1e, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc010000, size 12, enabled map[14]: type 1, range 32, base fc000000, size 16, enabled found-> vendor=0x1013, dev=0x6005, revid=0x01 bus=0, slot=11, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc011000, size 8, enabled map[14]: type 4, range 32, base 00001430, size 3, enabled map[18]: type 4, range 32, base 00001000, size 8, enabled found-> vendor=0x11c1, dev=0x0449, revid=0x01 bus=0, slot=12, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1420-0x142f at device 7.1 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82443MX USB controller> port 0x1400-0x141f irq 11 at device 7.2 on pci0 usb0: <Intel 82443MX USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <display, VGA> at device 9.0 (no driver attached) cbb0: <TI1211 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci0: <multimedia, audio> at device 11.0 (no driver attached) pci0: <simple comms> at device 12.0 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_acad0: <AC adapter> on acpi0 unknown: not probed (disabled) acpi_lid0: <Control Method Lid Switch> on acpi0 unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x3bc-0x3c3 irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lp0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 81 bf 1f 00 4f 0e 0f 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start pccard0: CIS version PCCARD 2.0 or 2.1 pccard0: CIS info: NETGEAR, FA410TX, Fast Ethernet pccard0: Manufacturer code 0x149, product 0x4530 pccard0: function 0: network adapter, ccr addr 400 mask b pccard0: function 0, config table entry 32: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required io16 irqlevel pccard0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace 300-31f; mwait_required io16 irqlevel pccard0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace 320-33f; mwait_required io16 irqlevel pccard0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace 340-35f; mwait_required io16 irqlevel pccard0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace 380-39f; mwait_required io16 irqlevel ed1: <NETGEAR FA410TX> at port 0x100-0x11f irq 11 function 0 config 32 on pccard0 ed1: bpf attached ed1: address 00:48:54:c0:99:7b, type Linksys (16 bit) miibus0: <MII bus> on ed1 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x080017, model 0x0002, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad0: success setting UDMA33 on Intel PIIX4 chip ad0: <IC25N030ATCS04-0/CA3OA71A> ATA-5 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=12 dmamode=34 udmamode=69 cblid=1 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/2/63 s:63 l:24627582 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/9/63 s:24627645 l:20964825 [2] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/12/63 s:45592470 l:208845 [3] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/15/63 s:45801315 l:12803805 GEOM: Configure ad0s1, start 32256 length 12609321984 end 12609354239 GEOM: Configure ad0s2, start 12609354240 length 10733990400 end 23343344639 GEOM: Configure ad0s3, start 23343344640 length 106928640 end 23450273279 GEOM: Configure ad0s4, start 23450273280 length 6555548160 end 30005821439 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 386883584 end 655319039 GEOM: Configure ad0s2c, start 0 length 10733990400 end 10733990399 GEOM: Configure ad0s2d, start 655319040 length 268435456 end 923754495 GEOM: Configure ad0s2e, start 923754496 length 8912896000 end 9836650495 GEOM: Configure ad0s2f, start 9836650496 length 897339904 end 10733990399 MBREXT Slice 5 on ad0s4: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:10651032 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:10651095 l:722925 GEOM: Configure ad0s5, start 32256 length 5453328384 end 5453360639 MBREXT Slice 6 on ad0s4: [0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:722862 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:11374020 l:1429785 GEOM: Configure ad0s6, start 5453392896 length 370105344 end 5823498239 MBREXT Slice 7 on ad0s4: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1429722 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s7, start 5823530496 length 732017664 end 6555548159 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Mon Oct 20 22:39:59 BST 2003 root_at_tara.thuvia.co.uk:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a61000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a611f4. Calibrating clock(s) ... i8254 clock: 1193160 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 497838311 Hz CPU: Intel Pentium III (497.84-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201261056 (191 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000000bc69fff, 184827904 bytes (45124 pages) avail memory = 185847808 (177 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6cf0 bios32: Entry = 0xfd8b0 (c00fd8b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd8b0+0x12f pnpbios: Found PnP BIOS data at 0xc00f6d20 pnpbios: Entry = f0000:ac81 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71948086) pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fdf60 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 10 A 0x61 3 4 5 7 9 10 11 15 embedded 0 11 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 12 A 0x63 3 4 5 7 9 10 11 15 embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 10 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 can't fetch resources for \\_SB_.PCI0.ISA_.FIR_ - AE_AML_INVALID_RESOURCE_TYPE acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.ISA_.LNKB irq 11: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.12.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.ISA_.LNKB irq 11: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable 0.12.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7194, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7198, revid=0x01 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001420, size 4, enabled found-> vendor=0x8086, dev=0x7199, revid=0x00 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001400, size 5, enabled pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.ISA_.LNKD) pcib0: slot 7 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x719a, revid=0x00 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00002180, size 4, enabled found-> vendor=0x8086, dev=0x719b, revid=0x00 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x000b, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base fd000000, size 24, enabled found-> vendor=0x126f, dev=0x0712, revid=0xa0 bus=0, slot=9, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x001f, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNKB) pcib0: slot 10 INTA is routed to irq 11 found-> vendor=0x104c, dev=0xac1e, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc010000, size 12, enabled map[14]: type 1, range 32, base fc000000, size 16, enabled pcib0: matched entry for 0.11.INTA (source \\_SB_.PCI0.ISA_.LNKC) pcib0: slot 11 INTA is routed to irq 5 found-> vendor=0x1013, dev=0x6005, revid=0x01 bus=0, slot=11, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc011000, size 8, enabled map[14]: type 4, range 32, base 00001430, size 3, enabled map[18]: type 4, range 32, base 00001000, size 8, enabled pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNKD) pcib0: slot 12 INTA is routed to irq 11 found-> vendor=0x11c1, dev=0x0449, revid=0x01 bus=0, slot=12, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1420-0x142f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-slave: stat=0x00 err=0x8e lsb=0x00 msb=0x00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82443MX USB controller> port 0x1400-0x141f irq 11 at device 7.2 on pci0 usb0: <Intel 82443MX USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <display, VGA> at device 9.0 (no driver attached) cbb0: <TI1211 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac1e104c 0x02100007 0x06070000 0x00022000 0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x019a1014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00649060 0x00000000 0x00000000 0x012c1272 0x90: 0x616482c0 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00c00000 0x00000803 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci0: <multimedia, audio> at device 11.0 (no driver attached) pci0: <simple comms> at device 12.0 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 unknown: not probed (disabled) acpi_lid0: <Control Method Lid Switch> on acpi0 unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x3bc-0x3c3 irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lp0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: <Embedded Controller: GPE 0x19> port 0x66,0x62 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 81 bf 1f 00 4f 0e 0f 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 497838311 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_ec0: info: new max delay is 38 us acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_ec0: info: new max delay is 70 us pccard0: CIS version PCCARD 2.0 or 2.1 pccard0: CIS info: NETGEAR, FA410TX, Fast Ethernet pccard0: Manufacturer code 0x149, product 0x4530 pccard0: function 0: network adapter, ccr addr 400 mask b pccard0: function 0, config table entry 32: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required io16 irqlevel pccard0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace 300-31f; mwait_required io16 irqlevel pccard0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace 320-33f; mwait_required io16 irqlevel pccard0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace 340-35f; mwait_required io16 irqlevel pccard0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace 380-39f; mwait_required io16 irqlevel ed1: <NETGEAR FA410TX> at port 0x100-0x11f irq 11 function 0 config 32 on pccard0 device_probe_and_attach: ed1 attach returned 6 ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin acpi_ec0: info: new max delay is 160 us acpi_ec0: info: new max delay is 210 us acpi_ec0: info: new max delay is 960 us ad0: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad0 dp=0xc2731a70 ad0: <IC25N030ATCS04-0/CA3OA71A> ATA-5 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/2/63 s:63 l:24627582 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/9/63 s:24627645 l:20964825 [2] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/12/63 s:45592470 l:208845 [3] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/15/63 s:45801315 l:12803805 GEOM: Configure ad0s1, start 32256 length 12609321984 end 12609354239 GEOM: Configure ad0s2, start 12609354240 length 10733990400 end 23343344639 GEOM: Configure ad0s3, start 23343344640 length 106928640 end 23450273279 GEOM: Configure ad0s4, start 23450273280 length 6555548160 end 30005821439 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 386883584 end 655319039 GEOM: Configure ad0s2c, start 0 length 10733990400 end 10733990399 GEOM: Configure ad0s2d, start 655319040 length 268435456 end 923754495 GEOM: Configure ad0s2e, start 923754496 length 8912896000 end 9836650495 GEOM: Configure ad0s2f, start 9836650496 length 897339904 end 10733990399 MBREXT Slice 5 on ad0s4: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:10651032 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:10651095 l:722925 GEOM: Configure ad0s5, start 32256 length 5453328384 end 5453360639 MBREXT Slice 6 on ad0s4: [0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:722862 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:11374020 l:1429785 GEOM: Configure ad0s6, start 5453392896 length 370105344 end 5823498239 MBREXT Slice 7 on ad0s4: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1429722 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s7, start 5823530496 length 732017664 end 6555548159 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init acpi_ec0: info: new max delay is 21000 us -- "Tigers will do ANYTHING for a tuna fish sandwich." "We're kind of stupid that way." *munch* *munch* -- <http://www.calvinandhobbes.com>Received on Mon Oct 20 2003 - 15:21:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:26 UTC