On Tue, 21 Oct 2003, Lukas Ertl wrote: > I just found that the em0 interface in one of my boxes stopped working > after an upgrade from 5.1-RELEASE to 5.1-CURRENT, this is what the kernel > spits out: > > $ dmesg | grep em0 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port > 0xb000-0xb03f mem 0xe2000000-0xe201ffff irq 12 at device 5.0 on pci2 > em0: [MPSAFE] > em0: The EEPROM Checksum Is Not Valid > em0: Unable to initialize the hardware > device_probe_and_attach: em0 attach returned 5 Oh, I forgot to add, this is what pciconf has to say about it: none3_at_pci2:5:0: class=0x020000 card=0x002e8086 chip=0x100e8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82544XT PRO/1000 MT Gigabit Ethernet Controller' class = network subclass = ethernet A solution would be highly appriciated. regards, le -- Lukas Ertl eMail: l.ertl_at_univie.ac.at UNIX Systemadministrator Tel.: (+43 1) 4277-14073 Vienna University Computer Center Fax.: (+43 1) 4277-9140 University of Vienna http://mailbox.univie.ac.at/~le/Received on Thu Oct 23 2003 - 06:18:41 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:26 UTC