Does anyone have any thoughts regarding this? I would like to get 5.1 on this server. Thank you, Stephane Raimbault. ----- Original Message ----- From: ""Stephane Raimbault"" <segr_at_hotmail.com> Newsgroups: mailing.freebsd.current Sent: Wednesday, October 29, 2003 4:07 PM Subject: 5.1-R and 5.1-C floppies will not boot on SuperMicro 6023P-8R > Hi, > > I'm trying to install 5.1-R or 5.1-C from floppies redirected output to = > serial port and it won't boot to the install screen. 4.9-R floppies = > with output redirected to serial port works and installs properly. This = > is what I get on my serial console when I try to boot on 5.1-C (similar = > to 5.1-R) seems to hang after the vga0 shows up during boot. > > Is there anything I can do or provide to resolve my install problem? > > Uncompressing ... done > Console: serial port > BIOS drive A: is disk0 > BIOS drive C: is disk1 > BIOS 633kB/4061120kB available memory > > FreeBSD/i386 bootstrap loader, Revision 1.1 > (root_at_ushi.jp.freebsd.org, Wed Oct 29 04:14:01 GMT 2003) > > include /boot/device.hints > > set hint.fdc.0.at=3D"isa" > > set hint.fdc.0.port=3D"0x3F0" > > set hint.fdc.0.irq=3D"6" > > set hint.fdc.0.drq=3D"2" > > set hint.fd.0.at=3D"fdc0" > > set hint.fd.0.drive=3D"0" > > set hint.fd.1.at=3D"fdc0" > > set hint.fd.1.drive=3D"1" > > set hint.ata.0.at=3D"isa" > > set hint.ata.0.port=3D"0x1F0" > > set hint.ata.0.irq=3D"14" > > set hint.ata.1.at=3D"isa" > > set hint.ata.1.port=3D"0x170" > > set hint.ata.1.irq=3D"15" > > set hint.adv.0.at=3D"isa" > > set hint.adv.0.disabled=3D"1" > > set hint.bt.0.at=3D"isa" > > set hint.bt.0.disabled=3D"1" > > set hint.aha.0.at=3D"isa" > > set hint.aha.0.disabled=3D"1" > > set hint.aic.0.at=3D"isa" > > set hint.aic.0.disabled=3D"1" > > set hint.atkbdc.0.at=3D"isa" > > set hint.atkbdc.0.port=3D"0x060" > > set hint.atkbd.0.at=3D"atkbdc" > > set hint.atkbd.0.irq=3D"1" > > set hint.atkbd.0.flags=3D"0x1" > > set hint.psm.0.at=3D"atkbdc" > > set hint.psm.0.irq=3D"12" > > set hint.vga.0.at=3D"isa" > > set hint.sc.0.at=3D"isa" > > set hint.sc.0.flags=3D"0x100" > > set hint.vt.0.at=3D"isa" > > set hint.vt.0.disabled=3D"1" > > set hint.apm.0.disabled=3D"1" > > set hint.apm.0.flags=3D"0x20" > > set hint.pcic.0.at=3D"isa" > > set hint.pcic.0.port=3D"0x3e0" > > set hint.pcic.0.maddr=3D"0xd0000" > > set hint.pcic.1.at=3D"isa" > > set hint.pcic.1.irq=3D"11" > > set hint.pcic.1.port=3D"0x3e2" > > set hint.pcic.1.maddr=3D"0xd4000" > > set hint.pcic.1.disabled=3D"1" > > set hint.sio.0.at=3D"isa" > > set hint.sio.0.port=3D"0x3F8" > > set hint.sio.0.flags=3D"0x10" > > set hint.sio.0.irq=3D"4" > > set hint.sio.1.at=3D"isa" > > set hint.sio.1.port=3D"0x2F8" > > set hint.sio.1.irq=3D"3" > > set hint.sio.2.at=3D"isa" > > set hint.sio.2.disabled=3D"1" > > set hint.sio.2.port=3D"0x3E8" > > set hint.sio.2.irq=3D"5" > > set hint.sio.3.at=3D"isa" > > set hint.sio.3.disabled=3D"1" > > set hint.sio.3.port=3D"0x2E8" > > set hint.sio.3.irq=3D"9" > > set hint.ppc.0.at=3D"isa" > > set hint.ppc.0.irq=3D"7" > > set hint.ed.0.at=3D"isa" > > set hint.ed.0.disabled=3D"1" > > set hint.ed.0.port=3D"0x280" > > set hint.ed.0.irq=3D"10" > > set hint.ed.0.maddr=3D"0xd8000" > > set hint.cs.0.at=3D"isa" > > set hint.cs.0.disabled=3D"1" > > set hint.cs.0.port=3D"0x300" > > set hint.sn.0.at=3D"isa" > > set hint.sn.0.disabled=3D"1" > > set hint.sn.0.port=3D"0x300" > > set hint.sn.0.irq=3D"10" > > set hint.ie.0.at=3D"isa" > > set hint.ie.0.disabled=3D"1" > > set hint.ie.0.port=3D"0x300" > > set hint.ie.0.irq=3D"10" > > set hint.ie.0.maddr=3D"0xd0000" > > set hint.fe.0.at=3D"isa" > > set hint.fe.0.disabled=3D"1" > > set hint.fe.0.port=3D"0x300" > > set hint.le.0.at=3D"isa" > > set hint.le.0.disabled=3D"1" > > set hint.le.0.port=3D"0x300" > > set hint.le.0.irq=3D"5" > > set hint.le.0.maddr=3D"0xd0000" > > set hint.lnc.0.at=3D"isa" > > set hint.lnc.0.disabled=3D"1" > > set hint.lnc.0.port=3D"0x280" > > set hint.lnc.0.irq=3D"10" > > set hint.lnc.0.drq=3D"0" > > load /kernel > /kernel text=3D0x23b500 data=3D0x2f024+0x4bedc / > > echo \007\007 > > > echo Please insert MFS root floppy and press enter: > Please insert MFS root floppy and press enter: > > read > > > load -t mfs_root /mfsroot > > set hint.acpi.0.disabled=3D1 > > set driver_floppy=3DYES > > set module_path=3D"/modules;/dist" > > echo \007\007 > > > autoboot 10 > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/kernel]... > 131072K of memory above 4GB ignored > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights = > reserved. > FreeBSD 5.1-CURRENT-20031029-JPSNAP #0: Wed Oct 29 04:30:49 GMT 2003 > root_at_ushi.jp.freebsd.org:/usr/obj/usr/src/sys/BOOTMFS > Preloaded elf kernel "/kernel" at 0xc0af1000. > Preloaded mfs_root "/mfsroot" at 0xc0af12c0. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0xf25 Stepping =3D 5 > = > Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= > E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory =3D 4160225280 (3967 MB) > avail memory =3D 4043710464 (3856 MB) > Pentium Pro MTRR support enabled > md0: Preloaded image </mfsroot> 4423680 bytes at 0xc06b7400 > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcibios: BIOS version 2.10 > Using $PIR table, 29 entries at 0xc00fddf0 > pcib0: <Host to PCI bridge> at pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > pci_cfgintr: 0:29 INTA BIOS irq 11 > pci_cfgintr: 0:29 INTB BIOS irq 10 > pci_cfgintr: 0:29 INTC BIOS irq 5 > pci0: <unknown> at device 0.1 (no driver attached) > pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <base peripheral, interrupt controller> at device 28.0 (no driver = > attached) > pcib2: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci1 > pci2: <PCI bus> on pcib2 > pci1: <base peripheral, interrupt controller> at device 30.0 (no driver = > attached) > pcib3: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci1 > pci3: <PCI bus> on pcib3 > pci_cfgintr: 3:2 INTA BIOS irq 11 > pci_cfgintr: 3:2 INTB BIOS irq 11 > pci3: <network, ethernet> at device 2.0 (no driver attached) > pci3: <network, ethernet> at device 2.1 (no driver attached) > pcib4: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0 > pci4: <PCI bus> on pcib4 > pci4: <base peripheral, interrupt controller> at device 28.0 (no driver = > attached) > pcib5: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci4 > pci5: <PCI bus> on pcib5 > pci4: <base peripheral, interrupt controller> at device 30.0 (no driver = > attached) > pcib6: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci4 > pci6: <PCI bus> on pcib6 > pci_cfgintr: 6:1 INTA BIOS irq 12 > asr0: <Adaptec Caching SCSI RAID> mem = > 0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8400000-0xf84fffff irq 12 = > at device 1.0 on pci6 > asr0: major=3D154 > asr0: ADAPTEC 2010S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O > uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port = > 0x2000-0x201f irq 11 at device 29.0 on pci0 > usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port = > 0x2020-0x203f irq 10 at device 29.1 on pci0 > usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port = > 0x2040-0x205f irq 5 at device 29.2 on pci0 > usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 > pci7: <PCI bus> on pcib7 > pci_cfgintr: 7:1 INTA BIOS irq 11 > pci7: <display, VGA> at device 1.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH3 UDMA100 controller> port = > 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device = > 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > orm0: <Option ROMs> at iomem = > 0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0= > xc7fff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port = > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x100> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = > isa0 > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Fri Oct 31 2003 - 07:55:28 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:27 UTC