ATAng detection issues

From: Petri Helenius <pete_at_he.iki.fi>
Date: Tue, 02 Sep 2003 08:50:09 +0300
I also noticed that earlier ATAng spits out these messages; (cut&pasting boot -v
is a little tedious, but I can copy it all if it helps)

The err=0x01 caught my eye.

Pete

atapci0: <Promise PDC20619 UDMA133 controller> port 0x1080-0x10ff,0x1480-0x148f,0x1000-0x107f mem 0x40200000-0x4021ffff,0x40400000-0x40400fff irq 9 at device 9.0 on pci2
pcib1: device atapci0 requested decoded memory range 0x40400000-0x40400fff
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: reset tp3 devices=0x1<ATA_MASTER>
ata2: at 0x40400000 on atapci0
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: reset tp3 devices=0x1<ATA_MASTER>
ata3: at 0x40400000 on atapci0
ata4: reset tp1 mask=01 ostat0=50 ostat1=00
ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata4: reset tp3 devices=0x1<ATA_MASTER>
ata4: at 0x40400000 on atapci0
ata5: reset tp1 mask=01 ostat0=20 ostat1=30
ata5-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata5: reset tp2 mask=01 stat0=20 stat1=00 devices=0x0
ata5-master: ATA err=0x25 lsb=0x25
ata5: reset tp3 devices=0x0
ata5: at 0x40400000 on atapci0
atapci1: <Promise PDC20269 UDMA133 controller> port 0x1490-0x149f,0x14b4-0x14b7,0x14a8-0x14af,0x14b0-0x14b3,0x14a0-0x14a7 mem 0x40300000-0x40303fff irq 10 at device 10.0 on pci2
pcib1: device atapci1 requested decoded I/O range 0x1490-0x149f
pcib1: device atapci1 requested decoded I/O range 0x14a0-0x14a7
pcib1: device atapci1 requested decoded I/O range 0x14b0-0x14b3
pcib1: device atapci1 requested decoded I/O range 0x14b2-0x14b2
ata6: reset tp1 mask=03 ostat0=20 ostat1=30
ata6-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata6-slave: stat=0x20 err=0x30 lsb=0x30 msb=0x30
ata6: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0
ata6-master: ATA err=0x25 lsb=0x25
ata6-slave: ATA err=0x25 lsb=0x25
ata6: reset tp3 devices=0x0
ata6: at 0x14a0 on atapci1
pcib1: device atapci1 requested decoded I/O range 0x14a8-0x14af
pcib1: device atapci1 requested decoded I/O range 0x14b4-0x14b7
pcib1: device atapci1 requested decoded I/O range 0x14b6-0x14b6
ata7: reset tp1 mask=03 ostat0=50 ostat1=00
ata7-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata7-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata7: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata7: reset tp3 devices=0x4<ATAPI_MASTER>
ata7: at 0x14a8 on atapci1
Received on Mon Sep 01 2003 - 20:50:14 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:21 UTC