Our system died when using iozone -a to ~300G vinum partition made from four disks. Sources were cvsupped 7.9.2003. Tomppa kmem_malloc(8192): kmem_map too small: 28229632 total allocated db> trace Debugger(c03cc728,c0429ce0,c03db0bd,ca6c4800,100) at Debugger+0x54 panic(c03db0bd,1000,1aec000,ca6c4830,c15ee720) at panic+0xd5 kmem_malloc(c082f0b0,1000,402,ca6c48a8,c034d1c5) at kmem_malloc+0x100 page_alloc(c083a9a0,1000,ca6c4893,402,c1416640) at page_alloc+0x27 slab_zalloc(c083a9a0,502,0,c03463cb,c0934738) at slab_zalloc+0xc5 uma_zone_slab(c083a9a0,502,c288c000,c24f8c90,4) at uma_zone_slab+0xe8 uma_zalloc_bucket(c083a9a0,502,c24f52a8,c17557fc,c24f8b60) at uma_zalloc_bucket+ 0x185 uma_zalloc_arg(c083a9a0,0,502,0,c083a9a0) at uma_zalloc_arg+0x2c7 malloc(3c,c0407640,502,0,1a180) at malloc+0x5c newallocindir(c1a0ae38,38e,1a180,0,0) at newallocindir+0x37 softdep_setup_allocindir_page(c1a0ae38,39a,0,c2516ae8,38e) at softdep_setup_allo cindir_page+0x3d ffs_balloc_ufs1(c17557fc,e68000,0,4000,c146a500) at ffs_balloc_ufs1+0xee9 ffs_write(ca6c4bc4,20002,c15ee720,0,ca6c4c70) at ffs_write+0x447 vn_write(c16b3594,ca6c4c70,c146a500,0,c15ee720) at vn_write+0x233 dofilewrite(c15ee720,c16b3594,3,8100000,80000) at dofilewrite+0xf8 write(c15ee720,ca6c4d10,c,c15ee720,3) at write+0x6e syscall(4002f,2817002f,bfbf002f,80000,bfbff7c0) at syscall+0x2b0 Xint0x80_syscall() at Xint0x80_syscall+0x1d --- syscall (4, FreeBSD ELF32, write), eip = 0x280e5b3f, esp = 0xbfbff70c, ebp = 0xbfbff728 --- db> Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #7: Mon Sep 8 17:09:29 EEST 2003 Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ec000. Calibrating clock(s) ... i8254 clock: 1193374 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 601365089 Hz CPU: Intel Celeron (601.37-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 67108864 (64 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000513000 - 0x0000000003eb9fff, 60452864 bytes (14759 pages) avail memory = 59953152 (57 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb080 bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb520 pnpbios: Found PnP BIOS data at 0xc00fbed0 pnpbios: Entry = f0000:bf00 Rev = 1.0 Other BIOS signatures found: random: <entropy source> netsmb_dev: loaded null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fde70 PCI-Only Interrupts: 5 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 19 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 1 0 19 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 1 0 19 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 1 0 19 D 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 B 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 D 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 D 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 D 0x61 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 A 0x63 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 B 0x60 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 C 0x61 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 D 0x62 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 B 0x60 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 C 0x63 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 D 0x62 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 D 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 7 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 7 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d000, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 map[90]: type 4, range 32, base 00005000, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d400, size 6, enabled pci_cfgintr_valid: BIOS irq 12 is valid pci_cfgintr: 0:11 INTA BIOS irq 12 found-> vendor=0x10b7, dev=0x9050, revid=0x00 bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=12 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base dd000000, size 12, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:15 INTA BIOS irq 11 found-> vendor=0x9004, dev=0x8178, revid=0x00 bus=0, slot=15, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 map[10]: type 1, range 32, base d4000000, size 25, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 0:17 INTA BIOS irq 5 found-> vendor=0x5333, dev=0x88f0, revid=0x00 bus=0, slot=17, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type 4, range 32, base 0000dc00, size 3, enabled map[14]: type 4, range 32, base 0000e000, size 2, enabled map[18]: type 4, range 32, base 0000e400, size 3, enabled map[1c]: type 4, range 32, base 0000e800, size 2, enabled map[20]: type 4, range 32, base 0000ec00, size 8, enabled pci_cfgintr_valid: BIOS irq 10 is valid pci_cfgintr: 0:19 INTA BIOS irq 10 found-> vendor=0x1103, dev=0x0004, revid=0x03 bus=0, slot=19, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER> ata0-slave: ATA err=0x01 lsb=0xa5 ata0: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90 ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata1-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER> ata1-slave: ATA err=0x01 lsb=0xa5 ata1: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd400-0xd43f irq 12 at device 11.0 on pci0 xl0: using port I/O xl0: Ethernet address: 00:60:08:0a:d4:1d xl0: media options word: e040 xl0: found MII/AUTO miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xdd000000-0xdd000fff irq 11 at device 15.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable is present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 448 instructions downloaded ahc0: Features 0x5, Bugs 0x25, Flags 0x20481540 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pci0: <display, VGA> at device 17.0 (no driver attached) atapci1: <HighPoint HPT370 UDMA100 controller> port 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc07 irq 10 at device 19.0 on pci0 atapci1: [MPSAFE] ata2: reset tp1 mask=03 ostat0=20 ostat1=30 ata2-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata2-slave: stat=0x20 err=0x30 lsb=0x30 msb=0x30 ata2: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0 ata2-master: ATA err=0x25 lsb=0x25 ata2-slave: ATA err=0x25 lsb=0x25 ata2: reset tp3 devices=0x0 ata2: at 0xdc00 on atapci1 ata2: [MPSAFE] ata3: reset tp1 mask=03 ostat0=20 ostat1=30 ata3-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata3-slave: stat=0x20 err=0x30 lsb=0x30 msb=0x30 ata3: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0 ata3-master: ATA err=0x25 lsb=0x25 ata3-slave: ATA err=0x25 lsb=0x25 ata3: reset tp3 devices=0x0 ata3: at 0xe400 on atapci1 ata3: [MPSAFE] ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 14 devices, largest 69 bytes PNP0000: adding irq mask 0x4 PNP0000: adding io range 0x20-0x21, size=0x2, align=0 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0 pnpbios: handle 0 device ID PNP0000 (0000d041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x83, size=0x3, align=0 PNP0200: adding io range 0x87-0x87, size=0x1, align=0 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0 PNP0200: adding io range 0x8f-0x91, size=0x3, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 4 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000 pnpbios: handle 7 device ID PNP0c01 (010cd041) PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xcf000-0xcffff, size=0x1000 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0x294-0x297, size=0x4, align=0 PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0 PNP0a03: adding io range 0x4000-0x403f, size=0x40, align=0 PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0 pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 PNP0700: adding irq mask 0x40 pnpbios: handle 13 device ID PNP0700 (0007d041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 pnpbios: handle 14 device ID PNP0400 (0004d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 16 device ID PNP0501 (0105d041) vt: vt0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xcefff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0067 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0a03> can't assign resources (port) unknown: <PNP0a03> at port 0x4d0-0x4d1,0x294-0x297 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 unknown: <PNP0400> can't assign resources (port) unknown: <PNP0400> at port 0x378-0x37f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 Device configuration finished. procfs registered Timecounter "TSC" frequency 601365089 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ata1: spurious interrupt - status=0x50 error=0x01 reason=0x01 ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad0 dp=0xc127bc70 ad0: <ST3120023A/3.31> ATA-6 disk at ata0-master ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039 ad1: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad1 dp=0xc127ba70 ad1: <ST3120023A/3.31> ATA-6 disk at ata0-slave ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA33 ar: FreeBSD check1 failed GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad0s1d, start 0 length 120031478784 end 120031478783 GEOM: new disk ad1 ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039 ad2: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad2 dp=0xc12b3e70 ad2: <ST3120023A/3.31> ATA-6 disk at ata1-master ad2: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA33 GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad1s1d, start 0 length 120031478784 end 120031478783 GEOM: new disk ad2 ar: FreeBSD check1 failed ad3: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad3 dp=0xc12b3770 ad3: <ST3120023A/3.31> ATA-6 disk at ata1-slave ad3: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, UDMA33 ar: FreeBSD check1 failed Waiting 8 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 120031478784 end 120031511039 GEOM: new disk ad3 GEOM: Configure ad2s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad2s1d, start 0 length 120031478784 end 120031478783 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad3s1, start 32256 length 120031478784 end 120031511039 GEOM: Configure ad3s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad3s1d, start 0 length 120031478784 end 120031478783 (probe0:ahc0:0:0:0): Retrying Command (ahc0:A:0:0): Sending WDTR 1 (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers (ahc0:A:0:0): Sending SDTR period c, offset 8 (ahc0:A:0:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc0: target 0 synchronous at 20.0MHz, offset = 0x8 GEOM: create disk da0 dp=0xc1292050 pass0 at ahc0 bus 0 target 0 lun 0 pass0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device pass0: Serial Number LA691693 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device da0: Serial Number LA691693 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C) GEOM: new disk da0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679 GEOM: Configure da0s1a, start 524288000 length 1073741824 end 1598029823 GEOM: Configure da0s1b, start 0 length 524288000 end 524287999 GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423 GEOM: Configure da0s1d, start 1598029824 length 7499097600 end 9097127423 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f at device 7.2 on pci0 pci_cfgintr_search: linked (63) to configured irq 10 at 0:19:0 pci_cfgintr: 0:7 INTD routed to irq 10 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self poweredReceived on Tue Sep 09 2003 - 09:48:46 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:21 UTC