hi, i've just got hold of an IBM Netfinity 4000R system (8653-45Y) which uses an IBM ServeRaid-3L to control two 9 gig disks. Drives are set up as a standard mirror, and online. Booting from 5.1-RELEASE and the latest snapshot i could find both result in a kernel panic on boot. i've included the dmesg for both kernels below, and would be grateful if anyone could offer any advice. many thanks, ian Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20030908-JPSNAP #0: Mon Sep 8 03:26:52 GMT 2003 root_at_ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b41000. Preloaded mfs_root "/boot/mfsroot" at 0xc0b41200. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (745.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 1073741824 (1024 MB) avail memory = 1031286784 (983 MB) Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0707670 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at device 7.2 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 10 at device 17.0 on pci0 fxp0: Disabling dynamic standby mode in EEPROM fxp0: New EEPROM ID: 0x4080 fxp0: EEPROM checksum _at_ 0x3f: 0xd29 -> 0xd29 fxp0: Ethernet address 00:06:29:de:b9:ac miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3080-0x30bf mem 0xfe900000-0xfe9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0 on pci0 fxp1: Disabling dynamic standby mode in EEPROM fxp1: New EEPROM ID: 0x4080 fxp1: EEPROM checksum _at_ 0x3f: 0xe29 -> 0xe29 fxp1: Ethernet address 00:06:29:de:b9:ab miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <PCI-PCI bridge> at device 20.0 on pci0 pci2: <PCI bus> on pcib2 ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfe000000-0xfe0fffff irq 9 at device 15.0 on pci2 ips0: reinitializing adapter, this could take several minutes. ips0: logical drives: 222 ipsd0: <Logical Drive> on ips0 GEOM: create disk ipsd0 dp=0xc6588b90 ipsd0: Logical Drive (1824184MB) ipsd1: <Logical Drive> on ips0 GEOM: create disk ipsd1 dp=0xc6588a90 ipsd1: Logical Drive (1824184MB) ipsd2: <Logical Drive> on ips0 GEOM: create disk ipsd2 dp=0xc6588990 ipsd2: Logical Drive (1824184MB) ipsd3: <Logical Drive> on ips0 GEOM: create disk ipsd3 dp=0xc6588890 ipsd3: Logical Drive (1824184MB) ipsd4: <Logical Drive> on ips0 GEOM: create disk ipsd4 dp=0xc6588790 Memory modified after free 0xc65aa080(124) panic: Most recently used by none Debugger("panic") Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0 db> reset Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 root_at_wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ac1000. Preloaded mfs_root "/boot/mfsroot" at 0xc0ac1200. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 744995420 Hz CPU: Intel Pentium III (745.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 1073741824 (1024 MB) avail memory = 1031827456 (984 MB) Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06877a4 npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at device 7.2 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x3040-0x307f mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 10 at device 17.0 on pci0 fxp0: Disabling dynamic standby mode in EEPROM fxp0: New EEPROM ID: 0x4080 fxp0: EEPROM checksum _at_ 0x3f: 0xd29 -> 0xd29 fxp0: Ethernet address 00:06:29:de:b9:ac miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x3080-0x30bf mem 0xfe900000-0xfe9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0 on pci0 fxp1: Disabling dynamic standby mode in EEPROM fxp1: New EEPROM ID: 0x4080 fxp1: EEPROM checksum _at_ 0x3f: 0xe29 -> 0xe29 fxp1: Ethernet address 00:06:29:de:b9:ab miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <PCI-PCI bridge> at device 20.0 on pci0 pci2: <PCI bus> on pcib2 ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfe000000-0xfe0fffff irq 9 at device 15.0 on pci2 ips0: reinitializing adapter, this could take several minutes. ips0: logical drives: 0 Fatal trap 12: page fault while in kernel mode fault virtual address = 0xffddc399 fault code = supervisor read, page not present instruction pointer = 0x8:0xc031ce94 stack pointer = 0x10:0xc0ae3c14 frame pointer = 0x10:0xc0ae3c24 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) trap number = 12 panic: page fault Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. -- :: darq.net /#/ :: wishes into horsesReceived on Thu Sep 11 2003 - 14:21:03 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:22 UTC