Re: ATAng and CF cards

From: Alex Dupre <sysadmin_at_alexdupre.com>
Date: Fri, 12 Sep 2003 16:11:48 +0200
Monday, September 8, 2003, 11:48:55 AM, you wrote:

Sl> DOH! things are not going weel this morning, this patch should be right:

I didn't try your patch, yet, but I can report some other phantom
drives with ataNG. The system is still the net4501 board.

With Sandisk 32MB CF:

ata0-master: pio=0x09 wdma=0xffffffff udma=0xffffffff cable=40pin
ad0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
ad0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
GEOM: create disk ad0 dp=0xc0d46770
ad0: <SanDisk SDCFB-32/vde 1.10> ATA-0 disk at ata0-master
ad0: 30MB (62720 sectors), 490 C, 4 H, 32 S, 512 B
ad0: 1 secs/int, 1 depth queue, ???
GEOM: new disk ad0
[0] f:80 typ:4 s(CHS):0/1/1 e(CHS):489/3/32 s:32 l:62688
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 16384 length 32096256 end 32112639


With Hitachi 8MB CF:

ata0-slave: pio=0x08 wdma=0xffffffff udma=0xffffffff cable=40pin
ata0-master: pio=0x09 wdma=0xffffffff udma=0xffffffff cable=40pin
ad0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
ad0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
GEOM: create disk ad0 dp=0xc0d46770
ad0: <Hitachi CV 5.1.1/Rev 1.01> ATA-0 disk at ata0-master
ad0: 7MB (15744 sectors), 246 C, 2 H, 32 S, 512 B
ad0: 1 secs/int, 1 depth queue, ???
GEOM: new disk ad0
ad1: WARNING - SETFEATURES recovered from missing interrupt
[0] f:80 typ:1 s(CHS):0/1/1 e(CHS):245/1/32 s:32 l:15712
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 16384 length 8044544 end 8060927
ad1: WARNING - SETFEATURES recovered from missing interrupt
GEOM: create disk ad1 dp=0xc0d46670
ad1: </> ATA-0 disk at ata0-slave


Fatal trap 18: integer divide fault while in kernel mode
instruction pointer     = 0x8:0xc028517b
stack pointer           = 0x10:0xc0315c44
frame pointer           = 0x10:0xc0315cc4
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
trap number             = 18
panic: integer divide fault

-- 
Alex Dupre                             sysadmin_at_alexdupre.com
http://www.alexdupre.com/              alex_at_sm.FreeBSD.org

Today's excuse: firewall needs cooling
Received on Fri Sep 12 2003 - 05:11:53 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:22 UTC