Re: ATAng hangs with kernel from september 15

From: Joachim Strömbergson <watchman_at_ludd.luth.se>
Date: Tue, 16 Sep 2003 23:33:12 +0200
Aloha!

Arjan van Leeuwen wrote:
> If I start my kernel from september 15, my computer hangs after this message:
> 
> atapci0: <VIA 82C686B UDMA100 controller> port 0xa400-0xa40f at device 7.1 on 
> pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]

Did you wait a while? I just completed my system update (getting the 
OpenSSH patch in at the same time, thanks sec-team!). After reboot my 
system also stopped at the exact message above. After what felt like 
about a minute, the system continued to boot and is running normally.

Try again and see if it is a real, solid hang, or if it just takes a while.

Included is my dmesg.

-- 
Med vänlig hälsning, Cheers!

Joachim Strömbergson
============================================================================
Joachim Strömbergson - ASIC designer, nice to *cute* animals.
     snail:                  phone:                     mail & web:
Sävenäsgatan 5A        +46 31 - 27 98 47          watchman_at_ludd.luth.se
416 72 Göteborg        +46 733 75 97 02           www.ludd.luth.se/~watchman
============================================================================

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #10: Tue Sep  2 09:44:15 CEST 2003
    js_at_fetis.ninja.se:/usr/obj/usr/src/sys/ATHLON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0676000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0676244.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc06762f0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc067639c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2000+ (1666.74-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536854528 (511 MB)
avail memory = 514424832 (490 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   A7V8X   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f1cd0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 9 INTA is routed to irq 10
pcib0: slot 11 INTA is routed to irq 6
pcib0: slot 15 INTA is routed to irq 10
pcib0: slot 16 INTA is routed to irq 9
pcib0: slot 16 INTB is routed to irq 9
pcib0: slot 16 INTC is routed to irq 9
pcib0: slot 16 INTD is routed to irq 9
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce2 GTS/GeForce2 Pro> mem 0xf0000000-0xf7ffffff,0xee000000-0xeeffffff irq 11 at device 0.0 on pci1
pci0: <network, ethernet> at device 9.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xec800000-0xec81ffff,0xed000000-0xed000fff irq 6 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:97:19:f8
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xd400-0xd41f irq 10 at device 15.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
pci0: <serial bus, USB> at device 16.0 (no driver attached)
pci0: <serial bus, USB> at device 16.1 (no driver attached)
pci0: <serial bus, USB> at device 16.2 (no driver attached)
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xa800-0xa80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
speaker0 port 0x61 on acpi0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROM> at iomem 0xcc000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1666738177 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
GEOM: create disk ad0 dp=0xc411ea70
ad0: 57241MB <ST360015A> [116301/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 19 19 
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #11: Tue Sep 16 22:18:56 CEST 2003
    js_at_fetis.ninja.se:/usr/obj/usr/src/sys/ATHLON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0679000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0679244.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc06792f0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc067939c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2000+ (1666.74-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536854528 (511 MB)
avail memory = 514412544 (490 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   A7V8X   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f1cd0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 9 INTA is routed to irq 10
pcib0: slot 11 INTA is routed to irq 6
pcib0: slot 15 INTA is routed to irq 10
pcib0: slot 16 INTA is routed to irq 9
pcib0: slot 16 INTB is routed to irq 9
pcib0: slot 16 INTC is routed to irq 9
pcib0: slot 16 INTD is routed to irq 9
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce2 GTS/GeForce2 Pro> mem 0xf0000000-0xf7ffffff,0xee000000-0xeeffffff irq 11 at device 0.0 on pci1
pci0: <network, ethernet> at device 9.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xec800000-0xec81ffff,0xed000000-0xed000fff irq 6 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:97:19:f8
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xd400-0xd41f irq 10 at device 15.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
pci0: <serial bus, USB> at device 16.0 (no driver attached)
pci0: <serial bus, USB> at device 16.1 (no driver attached)
pci0: <serial bus, USB> at device 16.2 (no driver attached)
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xa800-0xa80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
speaker0 port 0x61 on acpi0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROM> at iomem 0xcc000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1666737552 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
GEOM: create disk ad0 dp=0xc4122e70
ad0: 57241MB <ST360015A> [116301/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
Warning: pid 510 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 522 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 523 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 524 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 525 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 528 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 527 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 532 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 535 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 536 used static ldt allocation.
See the i386_set_ldt man page for more info
Received on Tue Sep 16 2003 - 12:34:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:22 UTC