> > This became quite tricky, but the main (and the worst problem) was with ATAng. > > I have Acer's motherboard and IBM's DTLA. Old driver were saying 'Non-ATA 66 cable or device' and perfectly worked in UDMA-33 mode. New driver didn't said a word, but when it tried to read something, everything was ending up with 'ICRC error'. I was already going to hack ata-chipsets to force UDMA-33, but I came upon hw.ata.ata_dma. > I need more info to be able to tell what going on... > A dmesg from a verbose booted system is mandatory here.. The problem is, I can't boot system with DMA, it wouldn't read anything with that error. System doesn't even mount root. There are boot log with ata_dma=0. By the way, I had a chance today to put my HDD into another machine and boot it.DMA works perfectly, so as PIO does, but PIO is EXTREMELY slow. I had old Samsung once, I guess it worked in PIO, but it was not that slow. Something's strange out there. boot log: > Calibrating clock(s) ... i8254 clock: 1193240 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Calibrating TSC clock ... TSC clock: 400912010 Hz > Data TLB: 128 entries, 2-way associative > Instruction TLB: 64 entries, 1-way associative > L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative > L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative > Write Allocate Enable Limit: 192M bytes > Write Allocate 15-16M bytes: Enable > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) > 0x0000000000564000 - 0x000000000bc69fff, 191913984 bytes (46854 pages) > bios32: Found BIOS32 Service Directory header at 0xc00fadd0 > bios32: Entry = 0xfb250 (c00fb250) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0xb280 > pnpbios: Found PnP BIOS data at 0xc00fbf10 > pnpbios: Entry = f0000:bf38 Rev = 1.0 > Other BIOS signatures found: > random: <entropy source> > null: <null device, zero device> > mem: <memory & I/O> > pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9) > PCI-Only Interrupts: 10 11 > Location Bus Device Pin Link IRQs > slot 1 0 10 A 0x01 3 4 5 7 9 10 11 12 14 15 > slot 1 0 10 B 0x02 3 4 5 7 9 10 11 12 14 15 > slot 1 0 10 C 0x03 3 4 5 7 9 10 11 12 14 15 > slot 1 0 10 D 0x04 3 4 5 7 9 10 11 12 14 15 > slot 2 0 11 A 0x02 3 4 5 7 9 10 11 12 14 15 > slot 2 0 11 B 0x03 3 4 5 7 9 10 11 12 14 15 > slot 2 0 11 C 0x04 3 4 5 7 9 10 11 12 14 15 > slot 2 0 11 D 0x01 3 4 5 7 9 10 11 12 14 15 > slot 3 0 12 A 0x03 3 4 5 7 9 10 11 12 14 15 > slot 3 0 12 B 0x04 3 4 5 7 9 10 11 12 14 15 > slot 3 0 12 C 0x01 3 4 5 7 9 10 11 12 14 15 > slot 3 0 12 D 0x02 3 4 5 7 9 10 11 12 14 15 > embedded 0 15 A 0x05 3 4 5 7 9 10 11 12 14 15 > embedded 0 15 B 0x06 3 4 5 7 9 10 11 12 14 15 > embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 > embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 > embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 > embedded 0 1 D 0x04 3 4 5 7 9 10 11 12 14 15 > embedded 0 2 A 0x59 3 4 5 7 9 10 11 12 14 15 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 7 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 7 func 0 > ACPI timer looks BAD min = 0, max = 16777211, width = 16777211 > ACPI timer looks BAD min = 1, max = 4, width = 3 > ACPI timer looks BAD min = 1, max = 16777211, width = 16777210 > ACPI timer looks BAD min = 0, max = 5, width = 5 > ACPI timer looks BAD min = 1, max = 16777215, width = 16777214 > ACPI timer looks BAD min = 1, max = 16777215, width = 16777214 > ACPI timer looks BAD min = 1, max = 4, width = 3 > ACPI timer looks BAD min = 1, max = 4, width = 3 > ACPI timer looks BAD min = 1, max = 16777211, width = 16777210 > ACPI timer looks BAD min = 1, max = 16777215, width = 16777214 > mss_probe: no address given, try 0x530 > mss_detect, busy still set (0xff) > ---- initial configuration ------------------------ > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 > \\_SB_.PCI0.ISA0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 > \\_SB_.PCI0.ISA0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 > \\_SB_.PCI0.ISA0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 > \\_SB_.PCI0.ISA0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 > \\_SB_.PCI0.ISA0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 > \\_SB_.PCI0.ISA0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 > \\_SB_.PCI0.ISA0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 > \\_SB_.PCI0.ISA0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 > \\_SB_.PCI0.ISA0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.0 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.1 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.2 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.3 > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 > \\_SB_.PCI0.ISA0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 > \\_SB_.PCI0.ISA0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 > \\_SB_.PCI0.ISA0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 > ---- before setting priority for links ------------ > \\_SB_.PCI0.ISA0.LNKB: > interrupts: 1 3 4 5 6 7 10 11 12 14 15 > penalty: 101320 2320 2320 1320 2320 2320 1720 1720 2320 11320 11320 > references: 4 > priority: 0 > \\_SB_.PCI0.ISA0.LNKC: > interrupts: 1 3 4 5 6 7 10 11 12 14 15 > penalty: 101320 2320 2320 1320 2320 2320 1720 1720 2320 11320 11320 > references: 4 > priority: 0 > \\_SB_.PCI0.ISA0.LNKD: > interrupts: 1 3 4 5 6 7 10 11 12 14 15 > penalty: 101320 2320 2320 1320 2320 2320 1720 1720 2320 11320 11320 > references: 4 > priority: 0 > ---- before fixup boot-disabled links ------------- > \\_SB_.PCI0.ISA0.LNKB: > interrupts: 1 3 4 5 6 7 10 11 12 14 15 > penalty: 101320 2320 2320 1320 2320 2320 1720 1720 2320 11320 11320 > references: 4 > priority: 51025 > \\_SB_.PCI0.ISA0.LNKC: > interrupts: 1 3 4 5 6 7 10 11 12 14 15 > penalty: 101320 2320 2320 1320 2320 2320 1720 1720 2320 11320 11320 > references: 4 > priority: 51025 > \\_SB_.PCI0.ISA0.LNKD: > interrupts: 1 3 4 5 6 7 10 11 12 14 15 > penalty: 101320 2320 2320 1320 2320 2320 1720 1720 2320 11320 11320 > references: 4 > priority: 51025 > ---- after fixup boot-disabled links -------------- > ---- arbitrated configuration --------------------- > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 > \\_SB_.PCI0.ISA0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 > \\_SB_.PCI0.ISA0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 > \\_SB_.PCI0.ISA0.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 > \\_SB_.PCI0.ISA0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 > \\_SB_.PCI0.ISA0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 > \\_SB_.PCI0.ISA0.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 > \\_SB_.PCI0.ISA0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 > \\_SB_.PCI0.ISA0.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 > \\_SB_.PCI0.ISA0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.0 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.1 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.2 > \\_SB_.PCI0.ISA0.LNKE irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.3 > \\_SB_.PCI0.ISA0.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 > \\_SB_.PCI0.ISA0.LNKB irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 > \\_SB_.PCI0.ISA0.LNKC irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 > \\_SB_.PCI0.ISA0.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 > pci0: physical bus=0 > map[10]: type 1, range 32, base d0000000, size 26, enabled > found-> vendor=0x10b9, dev=0x1541, revid=0x04 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2410, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10b9, dev=0x5243, revid=0x04 > bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x0400, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 32, base d8000000, size 12, enabled > pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.ISA0.LNKE) > found-> vendor=0x10b9, dev=0x5237, revid=0x03 > bus=0, slot=2, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > found-> vendor=0x10b9, dev=0x1533, revid=0xc3 > bus=0, slot=7, func=0 > class=06-01-00, hdrtype=0x00, mfdev=0 > cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D3 current D0 > map[20]: type 4, range 32, base 0000f000, size 4, enabled > found-> vendor=0x10b9, dev=0x5229, revid=0xc2 > bus=0, slot=15, func=0 > class=01-01-fa, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) > intpin=a, irq=255 > powerspec 2 supports D0 D3 current D0 > agp0: allocating GATT for aperture of size 64M > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xf000-0xfff > pcib1: memory decode 0xd4000000-0xd5ffffff > pcib1: prefetched decode 0xd6000000-0xd7ffffff > pci1: physical bus=1 > map[10]: type 1, range 32, base d4000000, size 24, enabled > map[14]: type 3, range 32, base d6000000, size 25, enabled > pcib0: matched entry for 0.1.INTA (source \\_SB_.PCI0.ISA0.LNKA) > found-> vendor=0x10de, dev=0x002c, revid=0x15 > bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) > intpin=a, irq=11 > powerspec 1 supports D0 D3 current D0 > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 > ata0-slave: stat=0x00 err=0xeb lsb=0x00 msb=0x00 > ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> > ata1: reset tp1 mask=03 ostat0=50 ostat1=50 > ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 > ata1-slave: stat=0x80 err=0x80 lsb=0x80 msb=0x80 > ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER > > mss_probe: no address given, try 0x530 > mss_detect, busy still set (0xff) > mss_probe: no address given, try 0x530 > mss_detect, busy still set (0xff) > mss_probe: no address given, try 0x530 > mss_detect, busy still set (0xff) > mss_probe: no address given, try 0x530 > mss_detect, busy still set (0xff) > mss_probe: no address given, try 0x530 > mss_detect, busy still set (0xff) > sio0: irq maps: 0x1 0x11 0x1 0x1 > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > ppc0: using extended I/O port range > ppc0: ECP SPP ECP+EPP SPP > lp0: bpf attached > unknown: not probed (disabled) > atkbd: the current kbd controller command byte 0067 > atkbd: keyboard ID 0x41ab (2) > kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 > psm0: unable to allocate IRQ > mss_detect, busy still set (0xff) > mss_detect, busy still set (0xff) > mss_detect, busy still set (0xff) > mss_detect, busy still set (0xff) > mss_detect, busy still set (0xff) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > unknown: not probed (disabled) > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > fdc: fdc0 already exists; skipping it > ppc: ppc0 already exists; skipping it > sio: sio0 already exists; skipping it > Trying Read_Port at 203 > CTL0043: start dependent (0) > CTL0043: adding irq mask 0x20 > CTL0043: adding dma mask 0x2 > CTL0043: adding dma mask 0x8 > CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1 > CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1 > CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 > CTL0043: start dependent (1) > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 > CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 > CTL0043: start dependent (1) > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 > CTL0043: start dependent (1) > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: start dependent (2) > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10 > CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4 > CTL0043: start dependent (2) > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: end dependent > CTL7005: start dependent (0) > CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1 > CTL7005: start dependent (1) > CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1 > CTL7005: end dependent > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fe0: not probed (disabled) > ie0: not probed (disabled) > le0: not probed (disabled) > lnc0: not probed (disabled) > pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 > pcic1: not probed (disabled) > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio1: irq maps: 0x1 0x9 0x1 0x1 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > fb0: vga0, vga, type:VGA (5), flags:0x7007f > fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > fb0: init mode:24, bios mode:3, current mode:24 > fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k > VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 > bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > sbc0: setting card to irq 5, drq 0, 1 > pcm0: sndbuf_setmap 6f5000, 1000; 0xcf8a1000 -> 6f5000 > pcm0: sndbuf_setmap 6f6000, 1000; 0xcf8a2000 -> 6f6000 > unknown: <Game> failed to probe at port 0x201 on isa0 > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 400912010 Hz quality 800 > splash: image decoder found: fire_saver > lo0: bpf attached > acpi_cpu0: set speed to 100.0% > ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin > ad0: setting PIO4 on AcerLabs Aladdin chip > ad0: <IBM-DTLA-305030/TW3OA60A> ATA-5 disk at ata0-master > ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B > ad0: 16 secs/int, 1 depth queue, PIO4 > GEOM: new disk ad0 > ar: FreeBSD check1 failed > ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin > ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin > acd0: setting PIO3 on AcerLabs Aladdin chip > acd0: <MATSHITA CR-585/ZS18> CDROM drive at ata1 as master > acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO3 > acd0: Reads: CDR, CDRW, CDDA stream > acd0: Writes: > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: CD-ROM 120mm data disc > [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):1018/254/63 s:63 l:16370172 > [1] f:00 typ:44 s(CHS):1019/0/1 e(CHS):1023/254/63 s:16370235 l:192780 > [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:16563015 l:43471890 > [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > GEOM: Configure ad0s1, start 32256 length 8381528064 end 8381560319 > GEOM: Configure ad0s2, start 8381560320 length 98703360 end 8480263679 > GEOM: Configure ad0s3, start 8480263680 length 22257607680 end 30737871359 > acd1: setting PIO4 on AcerLabs Aladdin chip > acd1: <CD-W54E/1.1B> CDRW drive at ata1 as slave > acd1: read 5512KB/s (5512KB/s) write 689KB/s (689KB/s), 1280KB buffer, PIO4 > acd1: Reads: CDR, CDRW, CDDA stream, packet > acd1: Writes: CDR, CDRW, test write > acd1: Audio: play, 256 volume levels > acd1: Mechanism: ejectable tray, unlocked > acd1: Medium: CD-R 120mm data disc > GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727 > GEOM: Configure ad0s3b, start 134217728 length 386826240 end 521043967 > GEOM: Configure ad0s3c, start 0 length 22257607680 end 22257607679 > GEOM: Configure ad0s3e, start 521043968 length 268435456 end 789479423 > GEOM: Configure ad0s3f, start 789479424 length 268435456 end 1057914879 > GEOM: Configure ad0s3g, start 1057914880 length 21199692800 end 22257607679 > WARNING: / was not properly dismounted > start_init: trying /sbin/init > tun0: bpf attachedReceived on Fri Sep 19 2003 - 15:57:29 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:23 UTC