I'm getting complaints from ata or atapicam during boot-up, but my CD-ROM seems fine (reading, at least). ACPI enabled, sym driver enabled + in use with a 875 chip (Tekram DC-390F) and cd0, da0, sa0, sa1. Is this something to worry about? dmesg excerpt: ... atapci0: <VIA 82C686A UDMA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ... Waiting 15 seconds for SCSI devices to settle (probe2:ata1:0:0:0): Recovered Sense (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): CAM Status: SCSI Status Error (probe2:ata1:0:0:0): SCSI Status: Check Condition (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB (probe2:ata1:0:0:0): Recovered Sense (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): CAM Status: SCSI Status Error (probe2:ata1:0:0:0): SCSI Status: Check Condition (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB ... cd1 at ata1 bus 0 target 0 lun 0 cd1: <PLEXTOR CD-R PX-W4824A 1.05> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: cd present [216058 x 2048 byte records] ... cd9660: Joliet Extension (Level 1)Received on Sun Sep 21 2003 - 14:47:30 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:23 UTC