Once again our current platform is unstable. Two weeks ago we had problems with kmem allocator and this was "fixed" by adding more memory and Dag-Erling Smørgrav still investigating those panics. Now we got different looking panic and there is core available if someone wants to take a peek on it. Tomppa ---clipclip--- kernel trap 19 with interrupts disabled NMI ... going to debugger kernel: type 19 trap, code=0 Stopped at sched_ithd+0x1d: movl $0x1,%eax db> trace sched_ithd(a) at sched_ithd+0x1d Xintr10() at Xintr10+0x6c --- interrupt, eip = 0xc037ed02, esp = 0xcd680cdc, ebp = 0xcd680cdc --- cpu_idle(73042444,890002c0,bde8241c,c7ffff80,10c2444) at cpu_idle+0x22 idle_proc(0,cd680d48,c7000000,50082444,c70000df) at idle_proc+0x25 fork_exit(c01ecd40,0,cd680d48) at fork_exit+0xb1 fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xcd680d7c, ebp = 0 --- db> sched_ithd(a) at sched_ithd+0x1d Xintr10() at Xintr10+0x6c --- interrupt, eip = 0xc037ed02, esp = 0xcd680cdc, ebp = 0xcd680cdc --- db> sched_ithd(a) at sched_ithd+0x1d Xintr10() at Xintr10+0x6c --- interrupt, eip = 0xc037ed02, esp = 0xcd680cdc, ebp = 0xcd680cdc --- db> panic panic: from debugger Debugger("panic") Fatal trap 3: breakpoint instruction fault while in kernel mode instruction pointer = 0x8:0xc0375b34 stack pointer = 0x10:0xcd680a70 frame pointer = 0x10:0xcd680a7c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = IOPL = 0 current process = 11 (idle) Stopped at sched_ithd+0x1d: movl $0x1,%eax db> panic: from debugger Uptime: 4h49m49s Dumping 255 MB 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 Dump complete Shutting down ACPI Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. Rebooting... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS drive D: is disk2 BIOS drive E: is disk3 BIOS drive F: is disk4 BIOS drive G: is disk5 BIOS drive H: is disk6 BIOS drive I: is disk7 BIOS drive J: is disk8 BIOS drive K: is disk9 BIOS 639kB/261056kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (x_at_iki.fi, Sun Sep 7 22:26:04 EEST 2003) Loading /boot/defaults/loader.conf |/boot/kernel/kernel text=0x2e50e4 data=0x2e854+0x51be8 syms=[0x4+0x39f60+0x4+0x46e72] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting [/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel]... |/boot/kernel/acpi.ko text=0x3b1f4 /-\data=0x170c+0xec0 |syms=[0x4+0x5bf0/+0x4+0x7a42-\] |/-SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000000fef0000 SMAP type=03 base=000000000fff3000 len=000000000000d000 SMAP type=04 base=000000000fff0000 len=0000000000003000 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Sat Sep 13 01:27:45 EEST 2003 x_at_iki.fi:/u/FreeBSD/src/sys/i386/compile/TIIKELI Preloaded elf kernel "/boot/kernel/kernel" at 0xc0535000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05351f4. Calibrating clock(s) ... i8254 clock: 1193367 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 634775245 Hz CPU: Intel Celeron (634.78-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA T,PSE36,MMX,FXSR,SSE> real memory = 268369920 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x000000000055c000 - 0x000000000fb49fff, 257875968 bytes (62958 pages) avail memory = 255086592 (243 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb080 bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb520 pnpbios: Found PnP BIOS data at 0xc00fbed0 pnpbios: Entry = f0000:bf00 Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> netsmb_dev: loaded npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IntelR AWRDACPI> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fde70 PCI-Only Interrupts: 5 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 19 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 1 0 19 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 1 0 19 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 1 0 19 D 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 B 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 2 0 17 D 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 3 0 15 D 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 0 13 D 0x61 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 A 0x63 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 B 0x60 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 C 0x61 3 4 5 7 9 10 11 12 14 15 slot 5 0 11 D 0x62 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 B 0x60 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 C 0x63 3 4 5 7 9 10 11 12 14 15 slot 6 0 9 D 0x62 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 7 0 8 D 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 7 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 7 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.FDC0._CRS] (Node 0 xc2592600), AE_AML_UNINITIALIZED_LOCAL ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.FDC0._CRS] (Node 0 xc2592600), AE_AML_UNINITIALIZED_LOCAL can't fetch resources for \_SB_.PCI0.FDC0 - AE_AML_UNINITIALIZED_LOCAL acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_tz0: _CRT value is absurd, ignored (200.0C) acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on ac pi0 ---- initial configuration ------------------------ \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.1 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.2 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.3 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.0 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.2 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.3 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.2 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.3 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.1 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.2 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.3 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.0 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.1 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.2 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.3 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .0 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .1 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .2 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .3 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .1 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .2 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .3 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .0 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .2 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .3 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .0 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .2 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.1 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.2 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 9.3 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.0 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.2 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 7.3 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.2 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 5.3 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.1 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.2 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 3.3 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.0 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.1 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.2 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 1.3 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .0 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .1 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .2 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9 .3 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .0 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .1 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .2 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8 .3 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .0 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .2 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7 .3 \_SB_.PCI0.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .0 \_SB_.PCI0.LNKB irq 12: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .1 \_SB_.PCI0.LNKC irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .2 \_SB_.PCI0.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1 .3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d000, size 5, enabled pcib0: matched entry for 0.7.INTD (source \_SB_.PCI0.LNKD) pcib0: slot 7 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00005000, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1011, dev=0x0024, revid=0x03 bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 1, range 32, base df020000, size 12, enabled pcib0: matched entry for 0.11.INTA (source \_SB_.PCI0.LNKD) pcib0: slot 11 INTA is routed to irq 11 found-> vendor=0x9004, dev=0x8178, revid=0x00 bus=0, slot=11, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 map[10]: type 1, range 32, base d4000000, size 25, enabled pcib0: matched entry for 0.15.INTA (source \_SB_.PCI0.LNKB) pcib0: slot 15 INTA is routed to irq 12 found-> vendor=0x5333, dev=0x88f0, revid=0x00 bus=0, slot=15, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 map[10]: type 4, range 32, base 0000d800, size 3, enabled map[14]: type 4, range 32, base 0000dc00, size 2, enabled map[18]: type 4, range 32, base 0000e000, size 3, enabled map[1c]: type 4, range 32, base 0000e400, size 2, enabled map[20]: type 4, range 32, base 0000e800, size 6, enabled map[24]: type 1, range 32, base df000000, size 17, enabled pcib0: matched entry for 0.17.INTA (source \_SB_.PCI0.LNKA) pcib0: slot 17 INTA is routed to irq 10 found-> vendor=0x105a, dev=0x4d30, revid=0x02 bus=0, slot=17, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at d evice 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci 0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER> ata0-slave: ATA err=0x01 lsb=0xa5 ata0: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-slave: stat=0x80 err=0x90 lsb=0x90 msb=0x90 ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata1-slave: stat=0x90 err=0x00 lsb=0x00 msb=0x00 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=50 stat1=10 devices=0x1<ATA_MASTER> ata1-slave: ATA err=0x01 lsb=0xa5 ata1: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pcib2: <PCI-PCI bridge> at device 9.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xdc000000-0xddffffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: <PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000c000, size 7, enabled map[14]: type 1, range 32, base dd000000, size 10, enabled pcib0: matched entry for 0.9.INTA (source \_SB_.PCI0.LNKB) pcib0: slot 9 INTA is routed to irq 12 pcib2: slot 4 INTA is routed to irq 12 found-> vendor=0x1011, dev=0x0019, revid=0x41 bus=2, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=12 map[10]: type 4, range 32, base 0000c400, size 7, enabled map[14]: type 1, range 32, base dd001000, size 10, enabled pcib0: matched entry for 0.9.INTB (source \_SB_.PCI0.LNKA) pcib0: slot 9 INTB is routed to irq 10 pcib2: slot 5 INTA is routed to irq 10 found-> vendor=0x1011, dev=0x0019, revid=0x41 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=10 map[10]: type 4, range 32, base 0000c800, size 7, enabled map[14]: type 1, range 32, base dd002000, size 10, enabled pcib0: matched entry for 0.9.INTC (source \_SB_.PCI0.LNKD) pcib0: slot 9 INTC is routed to irq 11 pcib2: slot 6 INTA is routed to irq 11 found-> vendor=0x1011, dev=0x0019, revid=0x41 bus=2, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000cc00, size 7, enabled map[14]: type 1, range 32, base dd003000, size 10, enabled pcib0: matched entry for 0.9.INTD (source \_SB_.PCI0.LNKC) pcib0: slot 9 INTD is routed to irq 5 pcib2: slot 7 INTA is routed to irq 5 found-> vendor=0x1011, dev=0x0019, revid=0x41 bus=2, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=5 dc0: <Intel 21143 10/100BaseTX> port 0xc000-0xc07f mem 0xdd000000-0xdd0003ff irq 12 at device 4.0 on pci2 pcib2: device dc0 requested decoded I/O range 0xc000-0xc07f dc0: Ethernet address: 00:c0:95:e5:07:38 miibus0: <MII bus> on dc0 dcphy0: <Intel 21143 NWAY media interface> on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc1: <Intel 21143 10/100BaseTX> port 0xc400-0xc47f mem 0xdd001000-0xdd0013ff irq 10 at device 5.0 on pci2 pcib2: device dc1 requested decoded I/O range 0xc400-0xc47f dc1: Ethernet address: 00:c0:95:e5:07:39 miibus1: <MII bus> on dc1 dcphy1: <Intel 21143 NWAY media interface> on miibus1 dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: bpf attached dc2: <Intel 21143 10/100BaseTX> port 0xc800-0xc87f mem 0xdd002000-0xdd0023ff irq 11 at device 6.0 on pci2 pcib2: device dc2 requested decoded I/O range 0xc800-0xc87f dc2: Ethernet address: 00:c0:95:e5:07:3a miibus2: <MII bus> on dc2 dcphy2: <Intel 21143 NWAY media interface> on miibus2 dcphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc2: bpf attached dc3: <Intel 21143 10/100BaseTX> port 0xcc00-0xcc7f mem 0xdd003000-0xdd0033ff irq 5 at device 7.0 on pci2 pcib2: device dc3 requested decoded I/O range 0xcc00-0xcc7f dc3: Ethernet address: 00:c0:95:e5:07:3b miibus3: <MII bus> on dc3 dcphy3: <Intel 21143 NWAY media interface> on miibus3 dcphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc3: bpf attached ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xdf020000-0xdf02 0fff irq 11 at device 11.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable is present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 448 instructions downloaded ahc0: Features 0x5, Bugs 0x25, Flags 0x20481540 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pci0: <display, VGA> at device 15.0 (no driver attached) atapci1: <Promise PDC20267 UDMA100 controller> port 0xe800-0xe83f,0xe400-0xe403, 0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 mem 0xdf000000-0xdf01ffff irq 10 at de vice 17.0 on pci0 atapci1: [MPSAFE] ata2: reset tp1 mask=03 ostat0=50 ostat1=50 ata2-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata2-slave: stat=0x80 err=0x01 lsb=0x00 msb=0x00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata2: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER> ata2: at 0xd800 on atapci1 ata2: [MPSAFE] ata3: reset tp1 mask=03 ostat0=50 ostat1=50 ata3-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata3-slave: stat=0x80 err=0x01 lsb=0x00 msb=0x00 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata3: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER> ata3: at 0xe000 on atapci1 ata3: [MPSAFE] fdc0: cannot reserve I/O port range (1 ports) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: unable to allocate IRQ fdc0: cannot reserve I/O port range (1 ports) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 vt: vt0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xcf000-0xd0fff,0xc8000-0xcefff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f 0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 634775245 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ata1: spurious interrupt - status=0x50 error=0x01 reason=0x01 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad0 dp=0xc269cb70 ad0: <ST3120023A/3.31> ATA-6 disk at ata0-master ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039 ad1: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad1 dp=0xc269c770 ad1: <ST3120023A/3.31> ATA-6 disk at ata0-slave ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA33 ar: FreeBSD check1 failed GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad0s1d, start 0 length 120031478784 end 120031478783 GEOM: new disk ad1 ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039 ad2: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad2 dp=0xc2626c70 ad2: <ST3120023A/3.31> ATA-6 disk at ata1-master ad2: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA33 GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad1s1d, start 0 length 120031478784 end 120031478783 GEOM: new disk ad2 ar: FreeBSD check1 failed ad3: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad3 dp=0xc2626a70 ad3: <ST3120023A/3.31> ATA-6 disk at ata1-slave ad3: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, UDMA33 ar: FreeBSD check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 120031478784 end 120031511039 ata2-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin GEOM: new disk ad3 ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad4: setting UDMA100 on Promise PDC20267 chip GEOM: create disk ad4 dp=0xc269c670 ad4: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata2-master ad4: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA100 GEOM: Configure ad2s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad2s1d, start 0 length 120031478784 end 120031478783 ar: Promise check1 failed ad5: setting UDMA100 on Promise PDC20267 chip GEOM: create disk ad5 dp=0xc2626e70 ad5: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata2-slave ad5: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad5: 16 secs/int, 1 depth queue, UDMA100 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad3s1, start 32256 length 120031478784 end 120031511039 ar: Promise check1 failed GEOM: new disk ad4 ata3-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin GEOM: new disk ad5 ata3-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad6: setting UDMA100 on Promise PDC20267 chip GEOM: create disk ad6 dp=0xc26a4d70 ad6: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata3-master ad6: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, UDMA100 GEOM: Configure ad3s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad3s1d, start 0 length 120031478784 end 120031478783 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 32256 length 160039240704 end 160039272959 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad5s1, start 32256 length 160039240704 end 160039272959 GEOM: new disk ad6 GEOM: Configure ad4s1a, start 8192 length 160039232512 end 160039240703 GEOM: Configure ad4s1c, start 0 length 160039240704 end 160039240703 GEOM: Configure ad4s1d, start 0 length 160039240704 end 160039240703 GEOM: Configure ad5s1a, start 8192 length 160039232512 end 160039240703 GEOM: Configure ad5s1c, start 0 length 160039240704 end 160039240703 GEOM: Configure ad5s1d, start 0 length 160039240704 end 160039240703 ad6: WARNING - READ_DMA recovered from missing interrupt ar: Promise check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad6s1, start 32256 length 160039240704 end 160039272959 ad7: setting UDMA100 on Promise PDC20267 chip GEOM: create disk ad7 dp=0xc26a4b70 ad7: <SAMSUNG SV1604N/TR100-23> ATA-7 disk at ata3-slave ad7: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad7: 16 secs/int, 1 depth queue, UDMA100 ad7: WARNING - READ_DMA recovered from missing interrupt ar: Promise check1 failed Waiting 8 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. GEOM: Configure ad6s1a, start 8192 length 160039232512 end 160039240703 GEOM: Configure ad6s1c, start 0 length 160039240704 end 160039240703 GEOM: Configure ad6s1d, start 0 length 160039240704 end 160039240703 GEOM: new disk ad7 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad7s1, start 32256 length 160039240704 end 160039272959 GEOM: Configure ad7s1a, start 8192 length 160039232512 end 160039240703 GEOM: Configure ad7s1c, start 0 length 160039240704 end 160039240703 GEOM: Configure ad7s1d, start 0 length 160039240704 end 160039240703 (probe0:ahc0:0:0:0): Retrying Command (ahc0:A:0:0): Sending WDTR 1 (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers (ahc0:A:0:0): Sending SDTR period c, offset 8 (ahc0:A:0:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc0: target 0 synchronous at 20.0MHz, offset = 0x8 GEOM: create disk da0 dp=0xc26af050 pass0 at ahc0 bus 0 target 0 lun 0 pass0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device pass0: Serial Number LA691693 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enable d da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device da0: Serial Number LA691693 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C) GEOM: new disk da0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679 GEOM: Configure da0s1a, start 524288000 length 1073741824 end 1598029823 GEOM: Configure da0s1b, start 0 length 524288000 end 524287999 GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423 GEOM: Configure da0s1d, start 1598029824 length 7499097600 end 9097127423 Mounting root from ufs:/dev/da0s1a WARNING: / was not properly dismounted start_init: trying /sbin/init acpi_tz0: _CRT value is absurd, ignored (200.0C) acpi_tz0: _CRT value is absurd, ignored (200.0C) Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point. kernel dumps on /dev/da0s1b vinum: loaded vinum: reading configuration from /dev/ad7s1d vinum: updating configuration from /dev/ad6s1d vinum: updating configuration from /dev/ad5s1d vinum: updating configuration from /dev/ad4s1d vinum: updating configuration from /dev/ad0s1d vinum: updating configuration from /dev/ad1s1d vinum: updating configuration from /dev/ad2s1d vinum: updating configuration from /dev/ad3s1d vinum: plex wareez.p1 does not have at least 3 subdisks swapon: adding /dev/da0s1b as swap device Starting file system checks: /dev/da0s1a: 17990 files, 215283 used, 300068 free (13988 frags, 35760 blocks, 2 .7% fragmentation) /dev/da0s1d: DEFER FOR BACKGROUND CHECKING ^CWARNING: /u was not properly dismounted Setting hostname: iki.fi. dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 193.64.243.175 netmask 0xffffffe0 broadcast 193.64.243.191 inet6 fe80::2c0:95ff:fee5:738%dc0 prefixlen 64 tentative scopeid 0x1 ether 00:c0:95:e5:07:38 media: Ethernet autoselect (none) status: no carrier lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet 127.0.0.1 netmask 0xff000000 add net default: gateway 193.64.243.190 Additional routing options:. add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 net.inet6.ip6.forwarding: 0 -> 0 net.inet6.ip6.accept_rtadv: 0 -> 1 add net fe80::: gateway ::1 add net ff02::: gateway ::1 IPv4 mapped IPv6 address support=NO hw.bus.devctl_disable: 0 -> 1 Mounting NFS file systems:. Starting syslogd. Sep 27 19:48:32 tiikeli syslogd: kernel boot file is /boot/kernel/kernel Checking for core dump... savecore: reboot after panic: from debugger Sep 27 19:48:45 tiikeli savecore: reboot after panic: from debugger savecore: writing core to vmcore.1 Starting ntpdate. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting usbd. uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 11 at de vice 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Starting local daemons:. Updating motd. Starting ntpd. Sep 27 19:49:32 tiikeli ntpd[403]: configure: keyword "gateway.oh2ch.org" unknow n, line ignored Configuring syscons: blanktime. Starting sshd. Initial i386 initialization:. Additional ABI support:. Starting cron. Local package initialization: proftpd Samba (skipping setiathome.sh, not executa ble). Additional TCP options:. Sat Sep 27 19:49:36 EEST 2003 FreeBSD/i386 (iki.fi) (ttyd0) login: (da0:ahc0:0:0:0): Queue Full (da0:ahc0:0:0:0): tagged openings now 64 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Queue Full (da0:ahc0:0:0:0): tagged openings now 63 (da0:ahc0:0:0:0): Retrying CommandReceived on Sat Sep 27 2003 - 08:10:14 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:23 UTC