Fw: SATA drive lock-up

my verbose dmesg is in attached zip file, from today.
my disks are connected with sata - pata converter based on marvel 88i8030
and one more question about ata3 and cable 40 wires, the cable actually is
serial ata cable, not the 40 wires pata cable.
and why it doesn't say then same thing about ata4 ? actually it's exactly
same
device like ata3?
and to be strict ata1 is also 80 pins cable not 40 pins.

ad4: setting UDMA100 on SiI 3112 chip
GEOM: create disk ad4 dp=0xc6262670
ad4: <IC35L120AVVA07-0/VA6OA52A> ATA-5 disk at ata2-master
ad4: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad4
ata3-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin

----- Original Message ----- 
From: "Soren Schmidt" <sos_at_spider.deepcore.dk>
To: "Derek Ragona" <derek_at_computinginnovations.com>
Cc: "Putinas" <pilkis_at_gmx.net>; <freebsd-current_at_FreeBSD.ORG>
Sent: Thursday, September 25, 2003 09:32
Subject: Re: SATA drive lock-up


It seems Derek Ragona wrote:
> Søren,
>
> My setup is as follows:
> Maxtor 6Y120MO 120GB SATA drive
> Adaptec Serial ATA RAID 1210SA
> Intel® Desktop Board D845GEBV2
> 1GB RAM
> 1.7 GHz Celeron CPU

Ok, I'll try to get something semialr setup here and try to reproduce.

> If there is some way to get more debugging information, please let me
> know.  If you want the ATA subsystem rebuilt differently for more
> debugging, I'm happy to do that as well.  If you want access to the box, I
> will give you that too.

Hmm debugging this kind of problems most often requires "hands on" access
to the HW, in some cases the ability to hook up measuring/test equipment
greatly enhances the problem hunting (or is the only way to catch it).

-Søren
_______________________________________________
freebsd-current_at_freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"