Hi. Still getting this behavior on current... ftp and sftp on large files is fine. However, cvsup, rsync etc. crashes the nic with a `watchdog timeout'. /etc/netstart does not do the job, however, if left for a period of hours, the interface comes back up. Thanks Ruslan for keeping an eye on this! Some information... am running current amd64 dual proc, Iwill DK8X motherboard, 3com 7000 series controller in a raid 1 configuration... the nic controller is onboard... skc0: Bus reserved 0x4000 bytes for rid 0x10 type 3 at 0xfd9fc000 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:d0:68:03:d4:99 miibus0: <MII bus> on sk0 -- uname -a FreeBSD jracine.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT #1: Fri Apr 9 21:48:00 EDT 2004 root_at_jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON amd64 -- dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #1: Fri Apr 9 21:48:00 EDT 2004 root_at_jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff808dd000. ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 248 (2205.02-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!> real memory = 3623813120 (3455 MB) avail memory = 3494551552 (3332 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard random: <entropy source, Software, Yarrow> acpi0: <A M I OEMRSDT> on motherboard acpi0: [GIANT-LOCKED] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0:0:0: setting power state D0 pci0:7:0: setting power state D0 pci0:7:1: setting power state D0 pci0:7:3: setting power state D0 pci0:7:5: setting power state D0 pci0:10:1: setting power state D0 pci0:11:1: setting power state D0 pci0:24:0: setting power state D0 pci0:24:1: setting power state D0 pci0:24:2: setting power state D0 pci0:24:3: setting power state D0 pci0:25:0: setting power state D0 pci0:25:1: setting power state D0 pci0:25:2: setting power state D0 pci0:25:3: setting power state D0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1:0:0: setting power state D0 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2:0:0: setting power state D0 pci2:0:1: setting power state D0 pci2:6:0: setting power state D0 pci2:7:0: setting power state D0 pci2:7:1: setting power state D0 pci2:7:2: setting power state D0 ohci0: <OHCI (generic) USB controller> mem 0xfd8fe000-0xfd8fefff irq 19 at device 0.0 on pci2 ohci0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8fe000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfd8ff000-0xfd8fffff irq 19 at device 0.1 on pci2 ohci1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8ff000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfd8f8000-0xfd8fbfff,0xfd8fd800-0xfd8fdfff irq 18 at device 6.0 on pci2 fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xfd8fd800 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:00:00:00:01:0e:f8 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:00:01:0e:f8 fwe0: Ethernet address: 02:00:00:01:0e:f8 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ohci2: <NEC uPD 9210 USB controller> mem 0xfd8f7000-0xfd8f7fff irq 19 at device 7.0 on pci2 ohci2: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8f7000 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0 usb2: <NEC uPD 9210 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ohci3: <NEC uPD 9210 USB controller> mem 0xfd8fc000-0xfd8fcfff irq 16 at device 7.1 on pci2 ohci3: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8fc000 ohci3: [GIANT-LOCKED] usb3: OHCI version 1.0 usb3: <NEC uPD 9210 USB controller> on ohci3 usb3: USB revision 1.0 uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci2: <serial bus, USB> at device 7.2 (no driver attached) pci2: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER pci2:7:2: setting power state D3 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf at device 7.1 on pci0 atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0:7:3: setting power state D3 pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 17 at device 7.5 on pci0 pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xc800 pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0xcc00 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC655 AC97 Codec> pcib3: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3:3:0: setting power state D0 skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfd9fc000-0xfd9fffff irq 19 at device 3.0 on pci3 skc0: Bus reserved 0x4000 bytes for rid 0x10 type 3 at 0xfd9fc000 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:d0:68:03:d4:99 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto skc0: [GIANT-LOCKED] pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached) pci0:10:1: setting power state D3 pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4:1:0: setting power state D0 twe0: <3ware 7000 series Storage Controller. Driver version 1.50.01.000> port 0xbc00-0xbc0f mem 0xfe000000-0xfe7fffff irq 17 at device 1.0 on pci4 twe0: Bus reserved 0x10 bytes for rid 0x10 type 4 at 0xbc00 twe0: [GIANT-LOCKED] twe0: 4 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048 pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached) pci0:11:1: setting power state D3 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 cpu0 on motherboard cpu1 on motherboard orm0: <Option ROMs> at iomem 0xcf800-0xd07ff,0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 0.976 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: CDRW <SAMSUNG CDRW/DVD SM-352B> at ata1-master PIO4 twed0: <Unit 0, TwinStor, Normal> on twe0 twed0: 70910MB (145224064 sectors) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/twed0s1aReceived on Sat Apr 10 2004 - 05:44:17 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:50 UTC