As of Sun Apr 11 15:45:45 PDT 2004 I'm unable to boot current. The kernel doesn't appear to be able to probe my ata drives anymore hanging off the ATA controller (the drive is PATA, not SATA). I'm unable to boot the kernel that was previously on the machine for one reason or another, and I'm pretty much out of ideas. Things to note: 1) I don't see any drives probed at all 2) An earlier stage of the loader has no problem booting, so the hardware should be good 3) List of GEOM managed disk devices is empty, probably due to 1 If you do reply to this, I'm at limited capacity with this box down at home (blech, using my hotmail account), so could you please CC me. At some point in the future I'll have downloaded an FBSD CD so I can get the kernel config off of the dead box, but right now I'm not able to get much out of it. Also, if anybody has an idea why I can't boot /boot/kernel.old/kernel at all (it locks up in the reading process |/-\| ) I'd appreciate some insight. Thanks, Eric Following is the kernel config: /boot/kernel/acpi.ko text=0x38844 data=0x19c4+0x118c syms=[0x4+0x66a0+0x4+0x88d9] SMAP type=01 base=0000000000000000 len=00000000000a0000 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000003fe74000 SMAP type=04 base=000000003ff74000 len=0000000000002000 SMAP type=03 base=000000003ff76000 len=0000000000021000 SMAP type=02 base=000000003ff97000 len=0000000000069000 SMAP type=02 base=00000000fed20000 len=0000000000070000 SMAP type=02 base=00000000fecf0000 len=0000000000001000 SMAP type=02 base=00000000fec00000 len=0000000000010000 SMAP type=02 base=00000000fee00000 len=0000000000010000 SMAP type=02 base=00000000ffb00000 len=0000000000500000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #2: Sun Apr 11 15:45:45 PDT 2004 root_at_goliath.lame.net:/usr/obj/usr/src/sys/GOLIATH Preloaded elf kernel "/boot/kernel/kernel" at 0xc082d000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082d294. Calibrating clock(s) ... i8254 clock: 1193131 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2394008344 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073168384 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000003ed45fff, 1041354752 bytes (254237 pages) avail memory = 1040777216 (992 MB) Table 'FACP' at 0xfd184 Table 'SSDT' at 0xfffc8667 Table 'APIC' at 0xfd1f8 MADT: Found table at 0xfd1f8 MP Configuration Table version 1.4 found at 0xc00f0000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 1 ACPI ID 3: disabled MADT: Found CPU APIC ID 3 ACPI ID 4: disabled ACPI APIC Table: <DELL PE400SC> APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xba6a pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: intpin 0 -> ExtINT (edge, activehi) ioapic0: intpin 1 -> irq 1 (edge, activehi) ioapic0: intpin 2 -> irq 2 (edge, activehi) ioapic0: intpin 3 -> irq 3 (edge, activehi) ioapic0: intpin 4 -> irq 4 (edge, activehi) ioapic0: intpin 5 -> irq 5 (edge, activehi) ioapic0: intpin 6 -> irq 6 (edge, activehi) ioapic0: intpin 7 -> irq 7 (edge, activehi) ioapic0: intpin 8 -> irq 8 (edge, activehi) ioapic0: intpin 9 -> irq 9 (edge, activehi) ioapic0: intpin 10 -> irq 10 (edge, activehi) ioapic0: intpin 11 -> irq 11 (edge, activehi) ioapic0: intpin 12 -> irq 12 (edge, activehi) ioapic0: intpin 13 -> irq 13 (edge, activehi) ioapic0: intpin 14 -> irq 14 (edge, activehi) ioapic0: intpin 15 -> irq 15 (edge, activehi) ioapic0: intpin 16 -> irq 16 (level, activelo) ioapic0: intpin 17 -> irq 17 (level, activelo) ioapic0: intpin 18 -> irq 18 (level, activelo) ioapic0: intpin 19 -> irq 19 (level, activelo) ioapic0: intpin 20 -> irq 20 (level, activelo) ioapic0: intpin 21 -> irq 21 (level, activelo) ioapic0: intpin 22 -> irq 22 (level, activelo) ioapic0: intpin 23 -> irq 23 (level, activelo) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 polarity: active-hi ioapic0: intpin 2 trigger: edge MADT: intr override: source 9, irq 9 ioapic0: intpin 9 polarity: active-hi ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory & I/O> Pentium Pro MTRR support enabled cpu0 on motherboard cpu1 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE400SC> on motherboard acpi0: [GIANT-LOCKED] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25788086) pcibios: BIOS version 2.10 Found $PIR table, 8 entries at 0xc00feae0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 14 15 embedded 2 12 A 0x62 3 4 5 6 7 9 10 11 14 15 slot 1 2 0 A 0x69 3 4 5 6 7 9 10 11 14 15 slot 1 2 0 B 0x6a 3 4 5 6 7 9 10 11 14 15 slot 1 2 0 C 0x6b 3 4 5 6 7 9 10 11 14 15 slot 1 2 0 D 0x68 3 4 5 6 7 9 10 11 14 15 slot 2 2 1 A 0x6a 3 4 5 6 7 9 10 11 14 15 slot 2 2 1 B 0x69 3 4 5 6 7 9 10 11 14 15 slot 2 2 1 C 0x68 3 4 5 6 7 9 10 11 14 15 slot 2 2 1 D 0x6b 3 4 5 6 7 9 10 11 14 15 slot 3 2 2 A 0x61 3 4 5 6 7 9 10 11 14 15 slot 3 2 2 B 0x62 3 4 5 6 7 9 10 11 14 15 slot 3 2 2 C 0x63 3 4 5 6 7 9 10 11 14 15 slot 3 2 2 D 0x60 3 4 5 6 7 9 10 11 14 15 slot 4 2 3 A 0x63 3 4 5 6 7 9 10 11 14 15 slot 4 2 3 B 0x62 3 4 5 6 7 9 10 11 14 15 slot 4 2 3 C 0x69 3 4 5 6 7 9 10 11 14 15 slot 4 2 3 D 0x6a 3 4 5 6 7 9 10 11 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x8086, dev=0x2578, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2579, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ff80, size 5, enabled pcib0: matched entry for 0.29.INTA (src ) pcib0: device is hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[20]: type 4, range 32, base 0000ff60, size 5, enabled pcib0: matched entry for 0.29.INTB (src ) pcib0: device is hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=19 map[20]: type 4, range 32, base 0000ff40, size 5, enabled pcib0: matched entry for 0.29.INTC (src ) pcib0: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 map[20]: type 4, range 32, base 0000ff20, size 5, enabled pcib0: matched entry for 0.29.INTA (src ) pcib0: device is hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24de, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[10]: type 1, range 32, base ffa80800, size 10, enabled pcib0: matched entry for 0.29.INTD (src ) pcib0: device is hardwired to IRQ 23 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=23 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 0000ffa0, size 4, enabled map[24]: type 1, range 32, base febffc00, size 10, enabled pcib0: matched entry for 0.31.INTA (src ) pcib0: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 map[10]: type 4, range 32, base 0000fe00, size 3, enabled map[14]: type 4, range 32, base 0000fe10, size 2, enabled map[18]: type 4, range 32, base 0000fe20, size 3, enabled map[1c]: type 4, range 32, base 0000fe30, size 2, enabled map[20]: type 4, range 32, base 0000fea0, size 4, enabled pcib0: matched entry for 0.31.INTA (src ) pcib0: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24d1, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 map[20]: type 4, range 32, base 0000efe0, size 5, enabled pcib0: matched entry for 0.31.INTB (src ) pcib0: device is hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0 agp0: Bus reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000 agp0: allocating GATT for aperture of size 128M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0 uhci0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0 uhci1: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff60 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ugen0: APC Back-UPS ES 725 FW:802.n2.D USB FW:n2, rev 1.10/1.06, addr 2 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 uhci2: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff40 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0 uhci3: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff20 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfd000000-0xfeafffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib2: device (null) requested decoded memory range 0xfd000000-0xfdffffff map[14]: type 4, range 32, base 0000dc00, size 8, enabled pcib2: device (null) requested decoded I/O range 0xdc00-0xdcff map[18]: type 1, range 32, base fe9de000, size 12, enabled pcib2: device (null) requested decoded memory range 0xfe9de000-0xfe9defff pcib2: matched entry for 2.0.INTA (src ) pcib2: device is hardwired to IRQ 21 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=2, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000dd00, size 8, enabled pcib2: device (null) requested decoded I/O range 0xdd00-0xddff map[14]: type 1, range 64, base fe9df000, size 12, enabled pcib2: device (null) requested decoded memory range 0xfe9df000-0xfe9dffff pcib2: matched entry for 2.1.INTA (src ) pcib2: device is hardwired to IRQ 22 found-> vendor=0x9005, dev=0x0010, revid=0x00 bus=2, slot=1, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns) intpin=a, irq=22 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000db30, size 4, enabled pcib2: device (null) requested decoded I/O range 0xdb30-0xdb3f map[18]: type 1, range 32, base fe000000, size 23, enabled pcib2: device (null) requested decoded memory range 0xfe000000-0xfe7fffff pcib2: matched entry for 2.2.INTA (src ) pcib2: device is hardwired to IRQ 17 found-> vendor=0x13c1, dev=0x1001, revid=0x01 bus=2, slot=2, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x011f, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x09 (2250 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 0000de00, size 8, enabled pcib2: device (null) requested decoded I/O range 0xde00-0xdeff map[14]: type 1, range 32, base fe9ddf00, size 8, enabled pcib2: device (null) requested decoded memory range 0xfe9ddf00-0xfe9ddfff pcib2: matched entry for 2.3.INTA (src ) pcib2: device is hardwired to IRQ 19 found-> vendor=0x11ad, dev=0x0002, revid=0x21 bus=2, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=19 map[10]: type 1, range 32, base fe9e0000, size 17, enabled pcib2: device (null) requested decoded memory range 0xfe9e0000-0xfe9fffff map[18]: type 4, range 32, base 0000db40, size 6, enabled pcib2: device (null) requested decoded I/O range 0xdb40-0xdb7f pcib2: matched entry for 2.12.INTA (src ) pcib2: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x100e, revid=0x02 bus=2, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci2: <display, VGA> at device 0.0 (no driver attached) ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xdd00-0xddff mem 0xfe9df000-0xfe9dffff irq 22 at device 1.0 on pci2 ahc0: Defaulting to MEMIO off ahc0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xdd00 ahc0: Reading SEEPROM...done. ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 424 instructions downloaded ahc0: Features 0x56f6, Bugs 0x6, Flags 0x28485540 ahc0: [GIANT-LOCKED] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs twe0: <3ware 7000 series Storage Controller. Driver version 1.50.01.000> port 0xdb30-0xdb3f mem 0xfe000000-0xfe7fffff irq 17 at device 2.0 on pci2 twe0: Bus reserved 0x10 bytes for rid 0x10 type 4 at 0xdb30 twe0: [GIANT-LOCKED] twe0: AEN: <soft reset> twe0: 8 ports, Firmware FE7X 1.05.00.056, BIOS BE7X 1.08.00.046 twe0: Monitor ME7X 1.01.00.038, PCB Rev3 , Achip 3.20 , Pchip 1.30-33 dc0: <82c169 PNIC 10/100BaseTX> port 0xde00-0xdeff mem 0xfe9ddf00-0xfe9ddfff irq 19 at device 3.0 on pci2 dc0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xde00 miibus0: <MII bus> on dc0 lxtphy0: <LXT970 10/100 media interface> on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc0: Ethernet address: 00:a0:cc:3e:e1:06 dc0: [GIANT-LOCKED] em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdb40-0xdb7f mem 0xfe9e0000-0xfe9fffff irq 18 at device 12.0 on pci2 em0: Bus reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000 em0: Bus reserved 0x40 bytes for rid 0x18 type 4 at 0xdb40 em0: [GIANT-LOCKED] em0: bpf attached em0: Ethernet address: 00:07:e9:26:2b:fc em0: Speed:N/A Duplex:N/A isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xfebffc00-0xfebfffff irq 18 at device 31.1 on pci0 atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 atapci1: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0 atapci1: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xfea0 atapci1: [MPSAFE] atapci1: Bus reserved 0x8 bytes for rid 0x10 type 4 at 0xfe00 atapci1: Bus reserved 0x4 bytes for rid 0x14 type 4 at 0xfe10 ata2: at 0xfe00 on atapci1 ata2: [MPSAFE] atapci1: Bus reserved 0x8 bytes for rid 0x18 type 4 at 0xfe20 atapci1: Bus reserved 0x4 bytes for rid 0x1c type 4 at 0xfe30 ata3: at 0xfe20 on atapci1 ata3: [MPSAFE] ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0xefe0-0xefff irq 17 at device 31.3 on pci0 ichsmb0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xefe0 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 fdc0: cannot reserve I/O port range (1 ports) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: cannot reserve I/O port range (1 ports) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xca000-0xcbfff,0xc8800-0xc9fff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: cannot reserve I/O port range (6 ports) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 04 b0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2394008344 Hz quality -100 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled BRIDGE 031224 loaded DUMMYNET initialized (011031) IPsec: Initialized Security Association Processing. lo0: bpf attached Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (ahc0:A:4:0): Sending WDTR 1 (ahc0:A:4:0): Received WDTR 1 filtered to 1 ahc0: target 4 using 16bit transfers (ahc0:A:4:0): Sending SDTR period a, offset 7f (ahc0:A:4:0): Received SDTR period c, offset 7 Filtered to period c, offset 7 ahc0: target 4 synchronous at 20.0MHz, offset = 0x7 (ahc0:A:4:0): Sending WDTR 1 (ahc0:A:4:0): Received WDTR 1 filtered to 1 ahc0: target 4 using 16bit transfers (ahc0:A:4:0): Sending SDTR period c, offset 7 (ahc0:A:4:0): Received SDTR period c, offset 7 Filtered to period c, offset 7 ahc0: target 4 synchronous at 20.0MHz, offset = 0x7 pass0 at ahc0 bus 0 target 4 lun 0 pass0: <OnStream ADR Series 6.05> Removable Sequential Access SCSI-2 device pass0: Serial Number 6635324450 pass0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit) sa0 at ahc0 bus 0 target 4 lun 0 sa0: <OnStream ADR Series 6.05> Removable Sequential Access SCSI-2 device sa0: Serial Number 6635324450 sa0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit) SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (IRQ 1) to cluster 0 ioapic0: routing intpin 3 (IRQ 3) to cluster 0 ioapic0: routing intpin 4 (IRQ 4) to cluster 0 ioapic0: routing intpin 7 (IRQ 7) to cluster 0 ioapic0: routing intpin 8 (IRQ 8) to cluster 0 ioapic0: routing intpin 9 (IRQ 9) to cluster 0 ioapic0: routing intpin 13 (IRQ 13) to cluster 0 ioapic0: routing intpin 16 (IRQ 16) to cluster 0 ioapic0: routing intpin 17 (IRQ 17) to cluster 0 ioapic0: routing intpin 18 (IRQ 18) to cluster 0 ioapic0: routing intpin 19 (IRQ 19) to cluster 0 ioapic0: routing intpin 22 (IRQ 22) to cluster 0 Mounting root from ufs:/dev/ad0s1a setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> ? List of GEOM managed disk devices: Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> panic: Root mount failed, startup aborted. at line 1292 in file /usr/src/sys/kern/vfs_mount.c cpuid = 1; Debugger("panic") Stopped at Debugger+0x46: xchgl %ebx,in_Debugger.0 db> _________________________________________________________________ Check out MSN PC Safety & Security to help ensure your PC is protected and safe. http://specials.msn.com/msn/security.aspReceived on Sun Apr 11 2004 - 15:04:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:50 UTC