On Sun, Apr 11, 2004 at 09:28:05AM -0600, M. Warner Losh wrote: > Interesting... I have a ICH4 in my Sony: > > atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f at device 31.1 on pci0 > atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > > I'm not running the latest in the tree because I'm having a geom > crash that I'm trying to get data for phk. I too have no com ports. I do have COM ports, I just didn't have a serial console setup :) I managed to correct this, and here's the bootlog, which shows that somehow atapci0 does get detected, but ata[01] doesn't :( In other words, I'll have to test whether this commit really was the culprit, but in the meantime I locked myself out of my laptop (by not having a real console -- for some reason input isn't getting to the laptop by serial console so I can't control the boot anymore, booting an old kernel is out of the question). Anyway once I get back in and find the time to revert the PCI power change, I'll have more info for you. Most likely it's a goof up on my part though. If you're still interested in anything else please let me know. --Stijn bootlog from failed boot follows: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Sun Apr 11 13:15:01 CEST 2004 stijn_at_pounce.lauwerszee.sandcat.nl:/local/freebsd/obj/local/freebsd/src/sys/POUNCE Preloaded elf kernel "/boot/kernel/kernel" at 0xc07e6000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1600MHz (1598.65-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 536535040 (511 MB) avail memory = 519598080 (495 MB) random: <entropy source, Software, Yarrow> Pentium Pro MTRR support enabled acpi0: <DELL CPi R > on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fc590 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTB is routed to irq 11 pcib0: slot 29 INTC is routed to irq 11 pcib0: slot 29 INTD is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: Bus reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0xc000-0xc0ff mem 0xfcff0000-0xfcffffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 128MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 0 INTA is routed to irq 11 pcib2: slot 3 INTA is routed to irq 11 bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2 bge0: Bus reserved 0x10000 bytes for rid 0x10 type 3 at 0xfaff0000 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0d:56:7d:4c:af bge0: [GIANT-LOCKED] cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: slot 1 INTA is routed to irq 11 cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: slot 1 INTA is routed to irq 11 pci2: <network> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0 pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xb800 pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0xbc40 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9750/51 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0 uart0: console (115200,n,8,1) ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 cpu0 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1598649750 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% pccard1: <unknown card> (manufacturer=0xffff, product=0x0001) at function 0 pccard1: CIS info: O2Micro, SmartCardBus Reader, V1.0 Mounting root from ufs:/dev/ad0s2a setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot>
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:50 UTC