Re: [patch] Xircom REM56G-100

From: Bohdan Horst <nexus_at_irc.pl>
Date: Mon, 12 Apr 2004 18:46:11 +0200
On Mon, Apr 12, 2004 at 08:57:53AM -0700, Kevin Oberman wrote:
> > Date: Mon, 12 Apr 2004 09:42:55 -0600 (MDT)
> > From: "M. Warner Losh" <imp_at_bsdimp.com>
> > Sender: owner-freebsd-mobile_at_freebsd.org
> > 
> > In message: <20040412153510.GA400_at_tuatara.fishballoon.org>
> >             Scott Mitchell <scott+freebsd_at_fishballoon.org> writes:
> > : > I hope you work for this problem. BTW, Does a xircom multi-function card
> > : > work now?
> > : 
> > : Not on OLDCARD, but nothing has changed there.  I believe they should work
> > : on NEWCARD, but I confess I have no idea how to configure that.
> > 
> > Multifunctions in NEWCARD only works for true multifunction cards.
> > Xircom cards aren't quite true MFC, as defined in the PCMCIA Standard,
> > so don't work yet.
> 
> Odd. At one time (last fall) I was able to run both the Ethernet and
> modem on my RBEM56G-100 card just fine. Sometime between then and last
> month, it stopped working. (RBEM56G-100 is the CardBus version of the
> REM56G-100 PCCard.) The Ethernet still works, but I really don't need
> that part. Maybe I should break down and get a PCMCIA modem card, but
> I'm afraid that I will get stuck with a WinModem.

Odd.. on my RBEM56G-100 works only modem .. (and i need eth) :)

Thinkpad 600X

Apr  3 19:19:17 aristo kernel: FreeBSD 5.2.1-RELEASE-p4 #1: Sat Apr  3
18:57:30 CEST 2004
[...]
Apr  3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/if_xe.ko" at 0xc0757420.
[...]
Apr  3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/cbb.ko" at 0xc07578c4.
Apr  3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/exca.ko" at 0xc075796c.
Apr  3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/pccard.ko" at 0xc0757a18.
Apr  3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc0757ac4.
[...]
Apr  3 19:19:17 aristo kernel: cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 9 at device 2.1 on pci0
Apr  3 19:19:17 aristo kernel: cardbus1: <CardBus bus> on cbb1
Apr  3 19:19:17 aristo kernel: pccard1: <16-bit PCCard bus> on cbb1
Apr  3 19:19:17 aristo kernel: cbb1: [MPSAFE]
[...]
Apr  3 19:19:18 aristo kernel: cardbus1: <network, ethernet> at device 0.0 (no driver attached)
Apr  3 19:19:18 aristo kernel: sio4: <Xircom Cardbus modem> port 0x1000-0x1007 mem 0x20000000-0x200007ff,0x20000800-0x20000fff irq 9 at device 0.1 on cardbus1
Apr  3 19:19:18 aristo kernel: sio4: type 16550A
Apr  3 19:19:18 aristo kernel: sio4: unable to activate interrupt in fast mode - using normal mode
[...]

ep0,ed0 works fine:
Apr  9 09:59:12 aristo kernel: ep0: <3Com Corporation 3C589> at port 0x100-0x10f irq 9 function 0 config 1 on pccard1
Feb 23 10:05:39 aristo kernel: ed0: <PCMCIA Ethernet Card> at port 0x300-0x31f irq 9 function 0 config 32 on pccard1


best regards


-- 
 /  irl: Bohdan 'Nexus' Horst  |  irc: Nexus  \
{----------------------v-------^---------------}
 \ http://irc.pl/nexus | mailto: nexus&irc.pl /
Received on Mon Apr 12 2004 - 09:19:00 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:50 UTC