greetings. OS version ---------- FreeBSD 5.2-CURRENT Driver download --------------- http://h18007.www1.hp.com/support/files/hpcpqnk/us/download/19760.html NDIS steps ---------- cp w70n51.sys w70n51.inf /sys/modules/if_ndis cd /sys/modules/ndis make; make load cd /sys/modules/if_ndis ndiscvt -i w70n51.inf -s w70n51.sys -o ndis_driver_data.h make; make load `wicontrol -i ndis0 -l` output (mine is ap[2]) ---------------------------------------------- 3 stations: ap[0]: netname (SSID): [ linksys ] BSSID: [ 00:04:5a:d0:f8:b7 ] Channel: [ 6 ] Quality/Signal/Noise [signal]: [ 146 / 146 / 0 ] [dBm]: [ 146 / -3 / -149 ] BSS Beacon Interval [msec]: [ 0 ] Capinfo: [ ] DataRate [Mbps]: [ 11 ] ap[1]: netname (SSID): [ NETGEAR ] BSSID: [ 00:09:5b:6e:b3:bc ] Channel: [ 11 ] Quality/Signal/Noise [signal]: [ 82 / 82 / 0 ] [dBm]: [ 82 / -67 / -149 ] BSS Beacon Interval [msec]: [ 0 ] Capinfo: [ ] DataRate [Mbps]: [ 11 ] ap[2]: netname (SSID): [ kawaja ] BSSID: [ 00:06:25:76:26:91 ] Channel: [ 2 ] Quality/Signal/Noise [signal]: [ 146 / 146 / 0 ] [dBm]: [ 146 / -3 / -149 ] BSS Beacon Interval [msec]: [ 0 ] Capinfo: [ ] DataRate [Mbps]: [ 11 ] `ifconfig` output ----------------- em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:0d:60:80:8b:ab media: Ethernet autoselect status: no carrier ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::20c:f1ff:fe26:5a72%ndis0 prefixlen 64 scopeid 0x5 inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:0c:f1:26:5a:73 media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) status: associated ssid kawaja 1:kawaja channel 2 authmode OPEN powersavemode OFF powersavesleep 100 rtsthreshold 2312 protmode CTS wepmode OFF weptxkey 1 when i "up" ndis0, i do see three of : ndis0: set filter failed: 6 but then the interface is up and i am able to funtion on my wireless network as expected (ping local and remote hosts). i get approximately 15-30 seconds and then my system locks up, no keyboard...nothing. power cycle is the only remedy. no logs of what is going on that i can see. the very first time i got ndis0 up, i managed to connect to a neighbors (shh) ap and i did not notice a problem, could of been chance...not sure. cant seem to force an ssid other than my own at this time. any ideas on the lock up? where to look or add in debugging? -- Jason Kawaja http://www.ietf.org/rfc/rfc1855.txtReceived on Mon Apr 19 2004 - 17:01:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:51 UTC