Hello, I have recently obtained a dual Xeon supermicro system (MB# X5DP8-G2). Installed 5.2.1, and cvsupped to -current. I get the following messages when booting, that have me worried: pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.HLC_ - AE_NOT_FOUND Are these ok to ignore? I also get a weird message when shutting down the server, after the disks sync, and the shutting down ACPI message comes up, the following is displayed "stray irq9", which is assigned to ACPI. Below is a complete dmesg. Thanks. --- Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Mon Aug 9 12:08:00 EDT 2004 root_at_mail.xxx.com:/usr/obj/usr/src/sys/MAIL ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.21-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2146959360 (2047 MB) avail memory = 2099777536 (2002 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard ioapic3 <Version 2.0> irqs 72-95 on motherboard ioapic4 <Version 2.0> irqs 96-119 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: [GIANT-LOCKED] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 cpu1: <ACPI CPU (2 Cx states)> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1 pci3: <ACPI PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x3000-0x303f mem 0xf8200000-0xf821ffff irq 28 at device 2.0 on pci3 em0: [GIANT-LOCKED] em0: Ethernet address: 00:30:48:2a:c0:ee em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x3040-0x307f mem 0xf8220000-0xf823ffff irq 29 at device 2.1 on pci3 em1: [GIANT-LOCKED] em1: Ethernet address: 00:30:48:2a:c0:ef em1: Speed:N/A Duplex:N/A pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.HLC_ - AE_NOT_FOUND pci4: <ACPI PCI bus> on pcib4 pci4: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4 pci5: <ACPI PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4 pci6: <ACPI PCI bus> on pcib6 asr0: <Adaptec Caching SCSI RAID> mem 0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8400000-0xf84fffff irq 72 at device 1.0 on pci6 asr0: [GIANT-LOCKED] asr0: ADAPTEC 2010S FW Rev. 3B0A, 2 channel, 256 CCBs, Protocol I2O uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pci7: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ATAPI_RESET time = 370us acd0: CDROM <CD-224E/1.9A> at ata1-master UDMA33 ses0 at asr0 bus 0 target 6 lun 0 ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #1 Launched! da0 at asr0 bus 0 target 0 lun 0 da0: <ADAPTEC RAID-10 3B0A> Fixed Direct Access SCSI-2 device da0: Tagged Queueing Enabled da0: 70006MB (143372288 512 byte sectors: 255H 63S/T 8924C) Mounting root from ufs:/dev/da0s1a em0: Link is up 100 Mbps Full DuplexReceived on Mon Aug 09 2004 - 14:41:03 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:05 UTC