Re: Project Evil: TI ACX111 non-success

From: Dennis Berger <db_at_nipsi.de>
Date: Thu, 12 Aug 2004 09:56:15 +0200
I have the dlink g650+ which also has the acx111 chipset...
NDIS failed acx driver failed also.
regards,
-Dennis

On Wed, Aug 11, 2004 at 04:40:58PM -0700, Evan Dower wrote:
> I've been trying to get the ndisulator to work for my NetGear WG311v2 so I 
> can take the ethernet cables and switches offthe floor in my hall. The 
> following is the "conversation" I've had with Bill Paul. It is perhaps best 
> to read from the bottom up to get the chronology right. Also, as it turns 
> out the net/acx100 port makes no claim to support the acx111, and I was 
> eventually able to build and load it, though of course it didn't work 
> because it doesn't support the acx111. Any help would be greatly 
> appreciated.
> 
> --
> 
> I managed to get rid of the "can't re-use a leaf" messaged by deleting
> the duplicate entry in ndis_driver_data.h. For some reason, whenever I
> try to load if_ndis.ko (ndis.ko is already loaded), I get messages about
> amdpm. Perhaps ndis returning 6 and failing to load is a result of the
> same return value from trying to attach amdpm.
> 
> amdpm0: <AMD 756/766/768/8111 Power Management Controller> port
> 0xe4e0-0xe4ff at device 7.3 on pci0
> amdpm0: could not map i/o space
> device_attach: amdpm0 attach returned 6
> ndis0: <NETGEAR WG311v2 802.11g Wireless PCI Adapter> mem
> 0xf0800000-0xf081ffff,0xf1000000-0xf1001fff irq 17 at device 6.0 on pci2
> ndis0: [GIANT-LOCKED]
> no match for srand
> ndis0: NDIS API version: 5.1
> ndis0: init handler failed
> device_attach: ndis0 attach returned 6
> 
> Thanks again,
> Evan Dower
> 
> El mar, 20-07-2004 a las 10:58, Evan Dower escribi?:
> >I have figured out that the "can't re-use a leaf" message is coming from
> >trying to register a sysctl, which comes from the .inf file. This seems
> >to indicate some limitations on the complexity of .inf files that can be
> >properly parsed and turned into a list of sysctls. Since I'm not exactly
> >sure what those limitations are, I'm sending you a link to the .inf file
> >(and the .sys file for good measure)? Other than that, it looks like
> >srand might just need to be plugged into one of the function tables
> >(probably the hal table, I guess). Also, if you can tell me what
> >limitations exist for the .inf file, I will gladly modify it to work and
> >make it available to other WG311v2 owners.
> >Thanks again,
> >Evan Dower
> >Note: Much of the .inf file (anything not for XP) is commented out in an
> >attempt to make things work. This was my doing. It didn't ship that way.
> >Since I don't really understand the Windows registry, I didn't get too
> >adventurous.
> >
> >Files at: http://students.washington.edu/evantd/pub/evil/
> >
> >El lun, 12-07-2004 a las 16:05, Evan Dower escribi?:
> >> I have a Netgear WG311v2. The v2 turns out to be very important as the
> >> original (v1 you might call it now) was based on an Atheros AR5212 and
> >> was thus supported by the ath driver. v2 is based on the the TI AXC111
> >> (aka TNETW1130), which should be supported by the net/acx100 port, but
> >> if_acx.ko fails to load due to a missing __panic symbol. Following the
> >> instructions you posted in an email, I made ndis_driver_data.h and
> >> built and loaded the if_ndis.ko module (after loading ndis.ko or
> >> compiling it into the kernel). I used the Windows XP .SYS and .INF
> >> files, though the Windows 2000 versions gave the same result, the
> >> Windows 98 files produced a module that panicked on load, and I didn't
> >> try the Windows ME files. The following is the output from `make
> >> load`.
> >> > /sbin/kldload -v /usr/current/src/sys/modules/if_ndis/if_ndis.ko
> >> ndis0: <NETGEAR WG311v2 802.11g Wireless PCI Adapter> mem
> >> 0xec800000-0xec81ffff,
> >> 0xed000000-0xed001fff irq 17 at device 6.0 on pci2
> >> ndis0: [GIANT-LOCKED]
> >> can't re-use a leaf (dot11DesiredBSSType)!
> >> no match for srand
> >> ndis0: NDIS API version: 5.1
> >> ndis0: init handler failed
> >> device_attach: ndis0 attach returned 6
> >> Loaded /usr/current/src/sys/modules/if_ndis/if_ndis.ko, id=11
> >> > Loading the module does not create /dev/ndis0 or /dev/if_ndis0 (or
> >> anything of the sort). I am running today's -CURRENT.
> >> > It seems that it requires srand, and I assume the 'can't re-use a leaf
> >> (dot11DesiredBSSType)!' is also a show-stopper. I ordered my card from
> >> newegg.com for about $50.
> >> > If there is anything else you might be interested in (a verbose boot
> >> log, copies of the .SYS and .INF files, testing for patches, etc.),
> >> just let me know. I'd be happy to help (especially since the result is
> >> a working wireless connection).
> >> > Thanks very much,
> 
> --
> Evan Dower
> Undergraduate, Computer Science
> University of Washington
> Public key: http://students.washington.edu/evantd/pgp-pub-key.txt
> Key fingerprint = D321 FA24 4BDA F82D 53A9  5B27 7D15 5A4F 033F 887D
> 
> _________________________________________________________________
> Don?t just search. Find. Check out the new MSN Search! 
> http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
Received on Thu Aug 12 2004 - 05:56:31 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:05 UTC