acpi link set: _CRS failed / calcru: negative runtime in -CURRENT

From: John Armstrong <info_at_mirdev.net>
Date: Wed, 18 Aug 2004 21:16:30 +1200
I recently decided to shift from 5.2.1p9 to 5.2-CURRENT on my home 
server, but I've been having trouble getting a fully bootable kernel, 
with the issue being a string of 'calcru: negative runtime' errors 
followed by a freeze after start_init even with a GENERIC kernel.

I can however successfully boot with ACPI disabled, although that 
presents another problem as one of my NICs dies with no ACPI, *sigh* ;). 
  Anyway, after a little hunt through dmesg I noted some ACPI errors 
when enabled:


acpi link set: _CRS failed for link \_SB_.PCI0.ALKB - AE_NULL_ENTRY
unknown: _SRS failed, irq 21 via \_SB_.PCI0.ALKB
acpi link set: _CRS failed for link \_SB_.PCI0.ALKD - AE_NULL_ENTRY
unknown: _SRS failed, irq 23 via \_SB_.PCI0.ALKD


I'm taking a wild stab in the dark and guessing that the ACPI timer is 
going a little berserk which may be causing the negative runtime errors, 
although to tell the truth I'm a complete newbie as far as this sort of 
thing goes.

Attached is the dmesg from a boot -v .. if there is anything else you'd 
like me to provide please let me know.


Cheers,

John Armstrong

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Wed Aug 18 18:00:57 NZST 2004
   mird_at_server.homenet:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b85000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b85228.
Calibrating clock(s) ... i8254 clock: 1193239 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 900005706 Hz
CPU: AMD Duron(tm) processor (900.01-MHz 686-class CPU)
Origin = "AuthenticAMD"  Id = 0x631  Stepping = 1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001f6bffff, 514420736 bytes (125591 pages)
avail memory = 515633152 (491 MB)
Table 'FACP' at 0x1fff3040
Table 'APIC' at 0x1fff6fc0
MADT: Found table at 0x1fff6fc0
MP Configuration Table version 1.4 found at 0xc00f1400
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
ACPI APIC Table: <VIA694 AWRDACPI>
bios32: Found BIOS32 Service Directory header at 0xc00faf20
bios32: Entry = 0xfb390 (c00fb390)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb3c0
pnpbios: Found PnP BIOS data at 0xc00fbe90
pnpbios: Entry = f0000:bec0  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=30991106)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdea0
PCI-Only Interrupts: 5 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      0    9    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    D   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   18    A   0x01  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.0
\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.1
\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.2
\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.3
\_SB_.PCI0.ALKA irq  0: [20]  0+ low,level,sharable 0.17.0
\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.17.1
\_SB_.PCI0.ALKC irq  0: [22]  0+ low,level,sharable 0.17.2
\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.17.3
\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.0
\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.1
\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.2
\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found->	vendor=0x1106, dev=0x3099, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0xb099, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e4000000, size 24, enabled
map[14]: type 1, range 32, base e5000000, size 14, enabled
map[18]: type 1, range 32, base e6000000, size 23, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 16
found->	vendor=0x102b, dev=0x051b, revid=0x00
bus=0, slot=9, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 4, range 32, base 0000c000, size  6, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 19
found->	vendor=0x10b7, dev=0x9050, revid=0x00
bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=19
map[10]: type 4, range 32, base 0000c400, size  8, enabled
map[14]: type 1, range 32, base ffffff00, size  8, enabled
pcib0: matched entry for 0.14.INTA
pcib0: slot 14 INTA hardwired to IRQ 17
found->	vendor=0x1106, dev=0x3065, revid=0x43
bus=0, slot=14, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=17
powerspec 2  supports D0 D1 D2 D3  current D0
map[20]: type 4, range 32, base 0000c800, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.ALKB)
pcib0: possible interrupts: 21
ACPI PCI link arbitrated settings:
\_SB_.PCI0.ALKB (references 5, priority 250):
interrupts:	    21
penalty:	    50
\_SB_.PCI0.ALKD (references 5, priority 250):
interrupts:	    23
penalty:	    50
\_SB_.PCI0.ALKA (references 1, priority 10):
interrupts:	    20
penalty:	    10
\_SB_.PCI0.ALKC (references 1, priority 10):
interrupts:	    22
penalty:	    10
acpi link set: _CRS failed for link \_SB_.PCI0.ALKB - AE_NULL_ENTRY
unknown: _SRS failed, irq 21 via \_SB_.PCI0.ALKB
found->	vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2  supports D0 D1 D2 D3  current D0
map[20]: type 4, range 32, base 0000cc00, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.ALKB)
pcib0: slot 16 INTB is already routed to irq 0
found->	vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=0
powerspec 2  supports D0 D1 D2 D3  current D0
map[20]: type 4, range 32, base 0000d000, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.ALKB)
pcib0: slot 16 INTC is already routed to irq 0
found->	vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=0
powerspec 2  supports D0 D1 D2 D3  current D0
map[10]: type 1, range 32, base ffffff00, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.ALKB)
pcib0: slot 16 INTD is already routed to irq 0
found->	vendor=0x1106, dev=0x3104, revid=0x82
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=0
powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2  supports D0 D3  current D0
map[20]: type 4, range 32, base 0000d400, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2  supports D0 D3  current D0
map[10]: type 4, range 32, base 0000e000, size  8, enabled
map[14]: type 1, range 32, base ffffff00, size  8, enabled
pcib0: matched entry for 0.18.INTA (src \_SB_.PCI0.ALKD)
pcib0: possible interrupts: 23
ACPI PCI link arbitrated settings:
\_SB_.PCI0.ALKD (references 5, priority 500):
interrupts:	    23
penalty:	   100
\_SB_.PCI0.ALKA (references 1, priority 20):
interrupts:	    20
penalty:	    20
\_SB_.PCI0.ALKC (references 1, priority 20):
interrupts:	    22
penalty:	    20
\_SB_.PCI0.ALKB (references 5, priority 0):
interrupts:	    21
penalty:	   100
acpi link set: _CRS failed for link \_SB_.PCI0.ALKD - AE_NULL_ENTRY
unknown: _SRS failed, irq 23 via \_SB_.PCI0.ALKD
found->	vendor=0x1106, dev=0x3065, revid=0x74
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
powerspec 2  supports D0 D1 D2 D3  current D0
map[10]: type 4, range 32, base 0000e400, size  8, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found->	vendor=0x13f6, dev=0x0111, revid=0x10
bus=0, slot=19, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=19
powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pci0: <display, VGA> at device 9.0 (no driver attached)
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xc000-0xc03f irq 19 at device 12.0 on pci0
xl0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xc000
xl0: using port I/O
xl0: media options word: e040
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:60:08:2f:27:05
xl0: [GIANT-LOCKED]
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc400-0xc4ff mem 0xffffff00-0xffffffff irq 17 at device 14.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc400
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: OUI 0x0005be, model 0x0008, rev. 0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:05:5d:e0:a5:bf
vr0: [GIANT-LOCKED]
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 0 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcc00
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 0 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xd400-0xd40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=20 ostat1=30
ata1-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata1-slave:  stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
vr1: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe000-0xe0ff mem 0xffffff00-0xffffffff irq 11 at device 18.0 on pci0
vr1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
miibus2: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus2
ukphy1: OUI 0x004063, model 0x0032, rev. 5
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: bpf attached
vr1: Ethernet address: 00:50:70:22:8c:70
vr1: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 19.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0: irq maps: 0x5003 0x5013 0x5003 0x5003
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x5003 0x500b 0x5003 0x5003
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 12: ioport 0xcc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 900005706 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA33 on VIA 8235 chip
ata0-slave: setting PIO4 on VIA 8235 chip
ata0-slave: setting UDMA100 on VIA 8235 chip
ad0: <WDC AC12100L/09.09M08> ATA-4 disk at ata0-master
ad0: 2014MB (4124736 sectors), 4092 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:4124673
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 2111832576 end 2111864831
ad1: <ST340810A/3.60> ATA-6 disk at ata0-slave
ad1: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
GEOM: Configure ad0s1a, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s1b, start 1073741824 length 268435456 end 1342177279
GEOM: Configure ad0s1c, start 0 length 2111832576 end 2111832575
GEOM: Configure ad0s1d, start 1342177280 length 268435456 end 1610612735
GEOM: Configure ad0s1e, start 1610612736 length 501219840 end 2111832575
GEOM: new disk ad1
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 40015954944 end 40015987199
GEOM: Configure ad1s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad1s1d, start 0 length 40015954944 end 40015954943
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
calcru: negative runtime of -941689 usec for pid 66 (rcorder)
calcru: negative runtime of -647032 usec for pid 81 (sysctl)
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled
calcru: negative runtime of -669025 usec for pid 198 (ipf)
calcru: negative runtime of -419390 usec for pid 11 (idle: cpu0)
calcru: negative runtime of -419390 usec for pid 11 (idle: cpu0)
calcru: negative runtime of -991447 usec for pid 303 (sysctl)
Received on Wed Aug 18 2004 - 07:16:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:06 UTC