On Wed, 18 Aug 2004 wsk_at_gddsn.org.cn wrote: > hi,folks: > psm freezes after the kernel booted , but works after disabled acpi module. > under X the mouse works but the keyboad looks freeze except Ctrl+Alt+Del > is it the IBM's hardware problems? and any ideas? Its IBM. They seem to disable the LPC bus if the floppy controller isn't initialized;p since FreeBSD probes the keyboard before the floppy it isn't active and the probe fails.. Some speical ACPI hacking is needed. In the interim, a USB keyboard should work fine :) > thanks any reply > > dmesg: > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2-CURRENT #3: Fri Aug 13 10:31:54 CST 2004 > wsk_at_gx02.eq-gx.ac.cn:/usr/obj/usr/src/sys/IBM01 > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a54000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a541f4. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.90-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO > > V,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > real memory = 1073590272 (1023 MB) > avail memory = 1041059840 (992 MB) > ACPI APIC Table: <IBM SERONYXP> > MADT: Forcing active-low polarity and level trigger for SCI > ioapic2 <Version 1.1> irqs 32-47 on motherboard > ioapic1 <Version 1.1> irqs 16-31 on motherboard > ioapic0 <Version 1.1> irqs 0-15 on motherboard > random: <entropy source, Software, Yarrow> > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <IBM SERONYXP> on motherboard > acpi0: [GIANT-LOCKED] > pcibios: BIOS version 2.10 > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0 > cpu0: <aCPI CPU> port 0x530-0x537 on acpi0 > pcib0: <aCPI Host-PCI bridge> on acpi0 > pci0: <aCPI PCI bus> on pcib0 > pcib0: slot 15 INTA is routed to irq 11 > pci0: <display, VGA> at device 6.0 (no driver attached) > atapci0: <ServerWorks CSB5 UDMA100 controller> port > 0x700-0x70f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x700 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: at 0x1f0 irq 14 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: simplex device, DMA on primary only > ata1: at 0x170 irq 15 on atapci0 > ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at > device 15.2 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfe000 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > isab0: <PCI-ISA bridge> at device 15.3 on pci0 > isa0: <ISA bus> on isab0 > pcib1: <aCPI Host-PCI bridge> on acpi0 > pci2: <aCPI PCI bus> on pcib1 > pcib2: <aCPI Host-PCI bridge> on acpi0 > pci4: <aCPI PCI bus> on pcib2 > pcib3: <aCPI Host-PCI bridge> on acpi0 > pci6: <aCPI PCI bus> on pcib3 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port > 0x2500-0x253f > mem 0xfbfe0000-0xfbffffff irq 29 at device 8.0 on pci6 > em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfe0000 > em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2500 > em0: [GIANT-LOCKED] > em0: Ethernet address: 00:09:6b:71:c6:aa > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port > 0x2540-0x257f > mem 0xfbfc0000-0xfbfdffff irq 30 at device 8.1 on pci6 > em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfc0000 > em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2540 > em1: [GIANT-LOCKED] > em1: Ethernet address: 00:09:6b:71:c6:ab > em1: Speed:N/A Duplex:N/A > pcib4: <aCPI Host-PCI bridge> on acpi0 > pci8: <aCPI PCI bus> on pcib4 > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2600-0x26ff mem > 0xf9fe0000-0xf9feffff,0xf9ff0000-0xf9ffffff irq 27 at device 7.0 on pci8 > mpt0: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf9ff0000 > mpt0: [GIANT-LOCKED] > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2700-0x27ff mem > 0xf9fc0000-0xf9fcffff,0xf9fd0000-0xf9fdffff irq 28 at device 7.1 on pci8 > mpt1: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf9fd0000 > mpt1: [GIANT-LOCKED] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <aT Keyboard> irq 1 on atkbdc0 > atkbd: unable to set the command byte. > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: unable to set the command byte. > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > orm0: <Option ROMs> at iomem 0xc9800-0xcd7ff,0xc8000-0xc97ff,0xc0000-0xc7fff on > isa0 > pmtimer0 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2793896724 Hz quality 800 > Timecounters tick every 10.000 msec > acd0: CDROM <CD-224E> at ata0-master PIO4 > Waiting 15 seconds for SCSI devices to settle > ses0 at mpt0 bus 0 target 8 lun 0 > ses0: <IBM 32P0032a S320 1 1> Fixed Processor SCSI-2 device > ses0: 3.300MB/s transfers > ses0: SAF-TE Compliant Device > da0 at mpt0 bus 0 target 0 lun 0 > da0: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device > da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing > Enabled > da0: 34710MB (71087626 512 byte sectors: 255H 63S/T 4425C) > > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" > -- Doug White | FreeBSD: The Power to Serve dwhite_at_gumbysoft.com | www.FreeBSD.orgReceived on Thu Aug 19 2004 - 15:26:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:07 UTC