fdc1 failure

From: Don Wilde <Don_at_Silver-Lynx.com>
Date: Sat, 21 Aug 2004 13:54:37 -0600
> I seem to have lost the fdc0 device with the latest -Current.
> 

Same here, on a Pentium 200MMX, see dmesg below.
[note, ACPI is disabled.]

Also, two builds ago, I started getting 'address already in use' from 
ssh and bind. I didn't change any configs, although it's quite possible 
I screwed up while doing mergemaster. I do wipe /usr/obj every time I 
build, and I've been using the new 
buildworld/buildkernel/installkernel/mm -p/installworld/mm procedure.

Thanks for all you dedicated hackers do!!!

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Sat Aug 21 10:39:11 MDT 2004
     din_at_testdrive.network-lynx.net:/usr/obj/usr/src/sys/TESTDR5
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
   Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
   Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 134217728 (128 MB)
avail memory = 125886464 (120 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <multimedia, video> at device 17.0 (no driver attached)
ahc0: <Adaptec aic7860 Ultra SCSI adapter> port 0x6000-0x60ff mem 
0xe4102000-0xe4102fff irq 11 at device 18.0 on pci0
ahc0: Using left over BIOS settings
ahc0: [GIANT-LOCKED]
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x6500-0x653f mem 
0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 11 at device 19.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:88:ed:d8
fxp0: [GIANT-LOCKED]
pci0: <display, VGA> at device 20.0 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 
0xd1000-0xd1fff,0xcc000-0xd0fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 
on isa0
device_attach: fdc0 attach returned 2
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata2: <Generic ESDI/IDE/ATA controller> at port 0x168-0x16f,0x36e-0x375 
irq 10 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
fdc1: cannot reserve I/O port range (6 ports)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 200455167 Hz quality 800
Timecounters tick every 1.000 msec
ATAPI_RESET time = 1730us
ad0: 8063MB <WDC AC28400R/17.01J17> [16383/16/63] at ata0-master WDMA2
acd0: CDRW <CD-RW CDR-5W48/VSG3> at ata0-slave WDMA2
Waiting 10 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL SE3.2S PJ09> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 3079MB (6306048 512 byte sectors: 64H 32S/T 3079C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL SE3.2S PJ09> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 3079MB (6306048 512 byte sectors: 64H 32S/T 3079C)
Mounting root from ufs:/dev/ad0s1a

-- 
Don Wilde  ---------> Silver Lynx <----------
  Raising the Trajectory of Human Development
---------------------------------------------
http://www.Silver-Lynx.com   001-505-891-4175
Received on Sat Aug 21 2004 - 17:54:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:07 UTC