Re: 5.3-BETA1 panic during boot up

From: Kachun Lee <kachun_at_pathlink.com>
Date: Tue, 24 Aug 2004 16:48:34 -0700
At 03:36 PM 8/24/2004 -0400, you wrote:
>On Tuesday 24 August 2004 02:21 pm, Kachun Lee wrote:
> > Hi,
> >
> > I was upgrading from 4.10 to 5.3-BETA1 (cvsup yesterday) and the kernel
> > panic right after the boot up message. I tried again with the apci-source.c
> > from current, but that did not help. I included the dmesg and panic message
> > below. Any hints?
>
>You must have acpi either in your kernel or have the acpi.ko module available
>to be loaded by the loader.  Unfortunately the non-ACPI code that probes
>PnPBIOS devices results in this panic and so far I haven't figured out
>exactly why.

Thanks! Adding 'device acpi' got the kernel booted through. I included the 
dmesg below. I don't know if all the ACPI messages are useful to you.

Regards

--------------------------------------------------------------------------------------------------------------------

DB: debugger backends: ddb^M^M
KDB: current backend: ddb^M^M
262144K of memory above 4GB ignored^M^M
Copyright (c) 1992-2004 The FreeBSD Project.^M^M
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994^M^M
         The Regents of the University of California. All rights reserved.^M^M
FreeBSD 5.3-BETA1 #2: Tue Aug 24 13:54:54 PDT 2004^M^M
     root_at_lisa.pathlink.com:/n/obj/n/bsd.src/5.3/src/sys/DEX^M^M
Timecounter "i8254" frequency 1193182 Hz quality 0^M^M
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.82-MHz 686-class CPU)^M^M
   Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5^M^M
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>^M^M
   Hyperthreading: 2 logical CPUs^M^M
real memory  = 4026466304 (3839 MB)^M^M
avail memory = 3943993344 (3761 MB)^M^M
     ACPI-0697: *** Warning: Type override - [DEB_] had invalid type 
(Integer) fo
r Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [MLIB] had invalid type 
(Integer) fo
r Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [DATA] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [SIO_] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [LEDP] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [GPEN] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [GPST] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [GP1N] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [WUES] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [WUSE] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [SBID] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [SWCE] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
     ACPI-0697: *** Warning: Type override - [SMIR] had invalid type 
(String) for
  Scope operator, changed to (Scope)^M^M
acpi0: <INTEL SBR20> on motherboard^M^M
acpi0: Power Button (fixed)^M^M
acpi_ec0: <Embedded Controller: GPE 0x8> port 0xca7,0xca6 on acpi0^M^M
acpi_timer0: couldn't allocate resource (port 0x408)^M^M
cpu0: <ACPI CPU> on acpi0^M^M
acpi_button0: <Sleep Button> on acpi0^M^M
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0^M^M
pci0: <ACPI PCI bus> on pcib0^M^M
pci0: <unknown> at device 0.1 (no driver attached)^M^M
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0^M^M
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P5 - 
AE_NOT_FO
UND^M^M
pci2: <ACPI PCI bus> on pcib1^M^M
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver 
attached
)^M^M
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci2^M^M
pci4: <ACPI PCI bus> on pcib2^M^M
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x3400-0x34ff mem 
0xfeae0000-0x
feae0fff irq 11 at device 1.0 on pci4^M^M
ahc0: [GIANT-LOCKED]^M^M
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs^M^M
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x3000-0x30ff mem 
0xfeaf0000-0x
feaf0fff irq 11 at device 1.1 on pci4^M^M
ahc1: [GIANT-LOCKED]^M^M
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs^M^M
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0x3800-0x380f
mem 0xfe000000-0xfe7fffff irq 11 at device 2.0 on pci4^M^M
twe0: [GIANT-LOCKED]^M^M
twe0: 12 ports, Firmware FE7X 1.05.00.034, BIOS BE7X 1.08.00.038^M^M
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver 
attached
)^M^M
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2^M^M
pci3: <ACPI PCI bus> on pcib3^M^M
twe1: <3ware Storage Controller. Driver version 1.50.01.002> port 0x2000-0x200f
mem 0xfd000000-0xfd7fffff irq 11 at device 1.0 on pci3^M^M
twe1: [GIANT-LOCKED]^M^M
twe1: 12 ports, Firmware FE7S 1.05.00.049, BIOS BE7X 1.08.00.046^M^M
twe2: <3ware Storage Controller. Driver version 1.50.01.002> port 0x2010-0x201f
mem 0xfc800000-0xfcffffff irq 11 at device 2.0 on pci3^M^M
twe2: [GIANT-LOCKED]^M^M
twe2: 12 ports, Firmware FE7S 1.05.00.036, BIOS BE7X 1.08.00.044^M^M
ahd0: <Adaptec AIC7901A Ultra320 SCSI adapter> port 0x2800-0x28ff,0x2400-0x24ff
mem 0xfd9b0000-0xfd9b1fff irq 11 at device 3.0 on pci3^M^M
ahd0: [GIANT-LOCKED]^M^M
aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs^M^M
pci0: <unknown> at device 3.1 (no driver attached)^M^M
pci0: <serial bus, USB> at device 29.0 (no driver attached)^M^M
pci0: <serial bus, USB> at device 29.1 (no driver attached)^M^M
pci0: <serial bus, USB> at device 29.2 (no driver attached)^M^M
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0^M^M
pci1: <ACPI PCI bus> on pcib4^M^M
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1440-0x147f mem 
0xfb780000-0xfb79fff
f,0xfb7a0000-0xfb7a0fff irq 11 at device 3.0 on pci1^M^M
miibus0: <MII bus> on fxp0^M^M
inphy0: <i82555 10/100 media interface> on miibus0^M^M
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto^M^M
fxp0: Ethernet address: 00:03:47:30:f6:e7^M^M
fxp0: [GIANT-LOCKED]^M^M
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 
0x1480-0x14bf
  mem 0xfb740000-0xfb75ffff irq 11 at device 4.0 on pci1^M^M
em0: [GIANT-LOCKED]^M^M
em0: Ethernet address: 00:03:47:30:f6:e9^M^M
em0:  Speed:N/A  Duplex:N/A^M^M
twe3: <3ware Storage Controller. Driver version 1.50.01.002> port 0x1400-0x140f
mem 0xf9800000-0xf9ffffff irq 9 at device 9.0 on pci1^M^M
twe3: [GIANT-LOCKED]^M^M
twe3: 12 ports, Firmware FE7S 1.05.00.036, BIOS BE7X 1.08.00.044^M^M
pci1: <display, VGA> at device 12.0 (no driver attached)^M^M
isab0: <PCI-ISA bridge> at device 31.0 on pci0^M^M
isa0: <ISA bus> on isab0^M^M
atapci0: <Intel ICH3 UDMA100 controller> port 
0x3a0-0x3af,0x376,0x170-0x177,0x3f
6,0x1f0-0x1f7 at device 31.1 on pci0^M^M
ata0: channel #0 on atapci0^M^M
ata1: channel #1 on atapci0^M^M
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)^M^M
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0^M^M
atkbd0: <AT Keyboard> irq 1 on atkbdc0^M^M
Received on Tue Aug 24 2004 - 21:48:20 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:08 UTC