When I try to run glxgears (or any other OpenGL software) I get the following message. disabling TCL support do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly. Try running with LIBGL_THROTTLE_REFRESH and LIBL_SYNC_REFRESH unset. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA1 #1: Wed Aug 25 17:35:12 EST 2004 stuart_at_imhotep.sigterm.com:/usr/obj/usr/src/sys/IMHOTEP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) Processor (1102.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> real memory = 134152192 (127 MB) avail memory = 121618432 (115 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <ATI Radeon QY RV100 7000/VE> port 0x9800-0x98ff mem 0xdfef0000-0xdfefffff,0xd0000000-0xd7ffffff at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 64MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device 7.3 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 7.4 (no driver attached) pcm0: <VIA VT82C686A> port 0xd400-0xd403,0xd800-0xd803,0xdc00-0xdcff irq 10 at device 7.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <ICEnsemble ICE1232 AC97 Codec> rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xdfffff00-0xdfffffff irq 9 at device 8.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:30:bd:09:4a:b2 rl0: [GIANT-LOCKED] pci0: <simple comms> at device 9.0 (no driver attached) acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1102506354 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% ad0: 28629MB <ST330621A/3.39> [58168/16/63] at ata0-master UDMA100 ATAPI_RESET time = 100us acd0: CDRW <GoldStar CD-RW CED-8120B/1.00> at ata1-master PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: <GoldStar CD-RW CED-8120B 1.00> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [281654 x 2048 byte records] Mounting root from ufs:/dev/ad0s2a -- Stuart Tanner <stuart_at_sigterm.com>Received on Wed Aug 25 2004 - 07:28:07 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:08 UTC