RELENG_5 on Dell Latitude D800 Laptop: So far, so good...

From: Jamie Bowden <ragnar_at_sysabend.org>
Date: Thu, 26 Aug 2004 10:23:19 -0700 (PDT)
This is a Dell Latitude D800 currently in a D/Port.  If I enable EHCI,
after it attaches, my USB peripherals no longer work, but at least it
doesn't panic any longer.  Out of the dock, EHCI works normally.

I'm using the latest Nvidia driver with XFree86 and it works fine.

Project Evil continues to be flawlessly evil of course.

Anyway, here's output from various utilities and a kernel config at the
bottom:



%uname -a
FreeBSD ghast 5.3-BETA1 FreeBSD 5.3-BETA1 #0: Thu Aug 26 12:13:45 EDT 2004
jamie_at_ghast:/usr/obj/usr/src/sys/ghast  i386



%dmesg -a
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA1 #0: Thu Aug 26 12:13:45 EDT 2004
    jamie_at_ghast:/usr/obj/usr/src/sys/ghast
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1700MHz (1698.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 1073405952 (1023 MB)
avail memory = 1040867328 (992 MB)
acpi0: <DELL CPi R  > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xe8000000-0xefffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq
11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq
11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq
11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3: Dell Port Replicator, class 9/0, rev 2.00/0.00, addr 2
uhub3: 4 ports with 4 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem
0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0d:56:aa:6d:42
bge0: [GIANT-LOCKED]
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <1394 Open Host Controller Interface> mem
0xfafe8000-0xfafebfff,0xfafef800-0xfafeffff irq 11 at device 1.2 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 32:4f:c0:00:3a:f8:e0:61
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:f8:e0:61
fwe0: Ethernet address: 32:4f:c0:f8:e0:61
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <base peripheral> at device 1.3 (no driver attached)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 5 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <ISA Option ROMs> at iomem
0xcf800-0xcffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
Timecounter "TSC" frequency 1698567044 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cpu0: Performance states changed
ad0: 38154MB <FUJITSU MHT2040AH/006C> [77520/16/63] at ata0-master UDMA100
ATAPI_RESET time = 120us
acd0: CDRW <QSI CD-RW/DVD-ROM SBW-242/UD30> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI CDRW/DVD SBW-242 UD30> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s3a
Pre-seeding PRNG:
 kickstart
.
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad0s3b as swap device
Starting file system checks:
/dev/ad0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 3041212 free (55612 frags, 373200 blocks, 1.2% fragmentation)
Setting hostname: ghast.
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet x.x.x.x netmask 0xffffff00 broadcast x.x.x.255
        inet6 fe80::20d:56ff:feaa:6d42%bge0 prefixlen 64 tentative scopeid 0x1
        ether 00:0d:56:aa:6d:42
        media: Ethernet autoselect (none)
        status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
add net default: gateway x.x.x.x
Additional routing options:
.
Starting devd.
hw.acpi.cpu.cx_lowest:
C1
 ->
C4

hw.acpi.cpu.throttle_state:
8
 ->
8

Mounting NFS file systems:
.
Starting syslogd.
Aug 26 12:44:18 ghast syslogd: kernel boot file is /boot/kernel/kernel
Setting date via ntp.
Looking for host dragon and service ntp
host found : dragon
26 Aug 12:44:20 ntpdate[267]: step time server x.x.x.x offset 0.526444
sec
Starting rpcbind.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib
/usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
/usr/X11R6/lib/aout /usr/local/lib/aout
Starting usbd.
Starting local daemons:
.
Updating motd
.
Starting rwhod.
Configuring syscons:
 blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
 linux
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting moused:
.
Starting inetd.
Starting background file system checks in 60 seconds.

Thu Aug 26 12:44:23 EDT 2004
nvidia0: <GeForce4 4200 Go> mem
0xf0000000-0xf3ffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
ndis0: <Dell TrueMobile 1300 WLAN Mini-PCI Card> mem 0xfafec000-0xfafedfff
irq 5 at device 3.0 on pci2
ndis0: [GIANT-LOCKED]
ndis0: NDIS API version: 5.0
ndis0: Ethernet address: 00:90:4b:1b:80:89
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps 36Mbps 48Mbps 54Mbps



%pciconf -lv
agp0_at_pci0:0:0:  class=0x060000 card=0x00000000 chip=0x33408086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82855PM Odem Host-Hub Interface Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1_at_pci0:1:0: class=0x060400 card=0x00000000 chip=0x33418086 rev=0x03
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82855PM Odem AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0_at_pci0:29:0:        class=0x0c0300 card=0x45418086 chip=0x24c28086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#1'
    class    = serial bus
    subclass = USB
uhci1_at_pci0:29:1:        class=0x0c0300 card=0x45418086 chip=0x24c48086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#2'
    class    = serial bus
    subclass = USB
uhci2_at_pci0:29:2:        class=0x0c0300 card=0x45418086 chip=0x24c78086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#3'
    class    = serial bus
    subclass = USB
none0_at_pci0:29:7:        class=0x0c0320 card=0x014e1028 chip=0x24cd8086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB EHCI Controller'
    class    = serial bus
    subclass = USB
pcib2_at_pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24488086
rev=0x81 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0_at_pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24cc8086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0_at_pci0:31:1:      class=0x01018a card=0x45418086 chip=0x24ca8086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
pcm0_at_pci0:31:5: class=0x040100 card=0x014e1028 chip=0x24c58086 rev=0x01
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio
Controller'
    class    = multimedia
    subclass = audio
none1_at_pci0:31:6:        class=0x070300 card=0x542214f1 chip=0x24c68086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem
Controller'
    class    = simple comms
nvidia0_at_pci1:0:0:       class=0x030000 card=0x01791028 chip=0x028610de
rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = '??? GeForce4 4200 Go'
    class    = display
    subclass = VGA
bge0_at_pci2:0:0:  class=0x020000 card=0x865d1028 chip=0x165d14e4 rev=0x01
hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM5705M Broadcom NetXtreme Gigabit Ethernet'
    class    = network
    subclass = ethernet
cbb0_at_pci2:1:0:  class=0x060700 card=0x014e1028 chip=0xac47104c rev=0x01
hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    class    = bridge
    subclass = PCI-CardBus
cbb1_at_pci2:1:1:  class=0x060700 card=0x014e1028 chip=0xac4a104c rev=0x01
hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    class    = bridge
    subclass = PCI-CardBus
fwohci0_at_pci2:1:2:       class=0x0c0010 card=0x014e1028 chip=0x802b104c
rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = serial bus
    subclass = FireWire
none2_at_pci2:1:3: class=0x088000 card=0x014e1028 chip=0x8204104c rev=0x00
hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = '4610, 4515, 4610FM TI UltraMedia Firmware Loader Device'
    class    = base peripheral
ndis0_at_pci2:3:0: class=0x028000 card=0x00011028 chip=0x432014e4 rev=0x02
hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM4306 802.11b/g Wireless LAN Controller'
    class    = network



%acpidump -t

/*
  RSD PTR: OEM=DELL, ACPI_Rev=1.0x (0)
        RSDT=0x3fff0000, cksum=66
 */
/*
  RSDT: Length=48, Revision=1, Checksum=124,
        OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d4041a,
        Creator ID=ASL, Creator Revision=0x61
        Entries={ 0x3fff0400, 0x3fff0800, 0x3fff07c0 }
 */
/*
  FACP: Length=116, Revision=1, Checksum=135,
        OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d4041a,
        Creator ID=ASL, Creator Revision=0x61
        FACS=0x3ffff800, DSDT=0x3fff0c00
        INT_MODEL=PIC
        Preferred_PM_Profile=Unspecified (0)
        SCI_INT=9
        SMI_CMD=0xb2, ACPI_ENABLE=0x70, ACPI_DISABLE=0x71, S4BIOS_REQ=0x97
        PSTATE_CNT=0x80
        PM1a_EVT_BLK=0x800-0x803
        PM1a_CNT_BLK=0x804-0x805
        PM2_CNT_BLK=0x820-0x820
        PM_TMR_BLK=0x808-0x80b
        GPE0_BLK=0x828-0x82f
        P_LVL2_LAT=50 us, P_LVL3_LAT=50 us
        FLUSH_SIZE=0, FLUSH_STRIDE=0
        DUTY_OFFSET=1, DUTY_WIDTH=3
        DAY_ALRM=0, MON_ALRM=0, CENTURY=0
        IAPC_BOOT_ARCH=
        Flags={WBINVD,PROC_C1,PWR_BUTTON,SLP_BUTTON,DCK_CAP}
 */
/*
  FACS: Length=64, HwSig=0x000000ff, Firm_Wake_Vec=0x00000000
        Global_Lock=
        Flags=S4BIOS
        Version=0
 */
/*
  DSDT: Length=11639, Revision=1, Checksum=234,
        OEMID=INT430, OEM Table ID=SYSFexxx, OEM Revision=0x1001,
        Creator ID=MSFT, Creator Revision=0x100000e
 */
/*
  ASF!: Length=91, Revision=16, Checksum=111,
        OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d4041a,
        Creator ID=ASL, Creator Revision=0x61
 */
/*
  BOOT: Length=40, Revision=1, Checksum=161,
        OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d4041a,
        Creator ID=ASL, Creator Revision=0x61
 */


%mptable -verbose

===============================================================================

MPTable, version 2.0.15

 looking for EBDA pointer _at_ 0x040e, found, searching EBDA _at_ 0x0009f000
 searching CMOS 'top of mem' _at_ 0x0009ec00 (635K)
 searching default 'top of mem' _at_ 0x0009fc00 (639K)
 searching BIOS _at_ 0x000f0000
 searching extended BIOS _at_ 0x000e0000

 MP FPS NOT found,
 suggest trying -grope option!!!



%cat /usr/src/sys/i386/conf/ghast
machine         i386
cpu             I686_CPU        #aka Pentium Pro(tm)
ident           ghast
options         INCLUDE_CONFIG_FILE     #Include this file in kernel
options         SCHED_ULE
options         INET            #InterNETworking
options         INET6           #IPv6 communications protocols
options         IPSEC           #IP security
options         IPSEC_ESP       #IP security (crypto; define w/ IPSEC)
options         FFS             #Berkeley Fast Filesystem
options         SOFTUPDATES     #Enable FFS soft updates support
options         PROCFS          #Process filesystem (requires PSEUDOFS)
options         PSEUDOFS        #Pseudo-filesystem framework
options         UDF             #Universal Disk Format
options         COMPAT_43       #Compatible with BSD 4.3 [KEEP THIS!]
options         COMPAT_FREEBSD4 #Compatible with FreeBSD4
options         COMPAT_LINUX    #Enable Linux ABI emulation
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         SYSVSHM         #SYSV-style shared memory
options         SYSVMSG         #SYSV-style message queues
options         SYSVSEM         #SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        #install a CDEV entry in /dev
options         FB_INSTALL_CDEV         #install a CDEV entry in /dev
options         NO_F00F_HACK
options         VESA
options         SMP             #Symmetric MultiProcessor Kernel
options         ALTQ_NOPCC      #Required for SMP build
options         COMPAT_AOUT
device          apic            # I/O APIC
device          isa
device          pci
device          ata
device          atadisk         #ATA disk drives
device          atapicd         #ATAPI CDROM drives
device          atapifd         #ATAPI floppy drives
device          atapist         #ATAPI tape drives
device          atapicam        #emulate ATAPI devices as SCSI ditto via CAM
options         ATA_STATIC_ID   #Static device numbering
device          ahc             #AHA2940 and onboard AIC7xxx devices
options         AHC_ALLOW_MEMIO
device          scbus           #SCSI bus (required)
device          ch              #SCSI media changers
device          da              #Direct Access (disks)
device          sa              #Sequential Access (tape etc)
device          cd              #CD
device          pass            #Passthrough device (direct SCSI access)
device          ses             #SCSI Environmental Services (and SAF-TE)
device          atkbdc          #AT keyboard controller
device          atkbd           #AT keyboard
device          psm             #PS/2 mouse
device          vga             #VGA video card driver
device          splash          #Splash screen and screen saver support
device          sc
device          agp             #support several AGP chipsets
device          npx
device          acpi
device          apm
device          sio             #8250, 16[45]50 based serial ports
device          ppc
device          ppbus           #Parallel port bus (required)
device          lpt             #Printer
device          plip            #TCP/IP over parallel
device          ppi             #Parallel port interface device
device          vpo             #Requires scbus and da
device          miibus          #MII bus support
device          fxp             #Intel EtherExpress PRO/100B (82557, 82558)
device          xl              #3Com 3c90x (``Boomerang'', ``Cyclone'')
device          bge             #Broadcom BCM570xx Gigabit Ethernet
device          wlan            #802.11 support
device          sound
device          "snd_emu10k1"
device          snd_ich
device          joy
device          bktr
options         OVERRIDE_TUNER=1
options         BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
options         BKTR_NEW_MSP34XX_DRIVER
device          smbus           #Bus support, required for smb below.
device          ichsmb
device          iicbus
device          iicbb
device          iicsmb
device          random          #Entropy device
device          mem
device          io
device          loop            #Network loopback
device          ether           #Ethernet support
device          ppp             #Kernel PPP
options         PPP_BSDCOMP     #PPP BSD-compress support
options         PPP_DEFLATE     #PPP zlib/deflate/gzip support
device          tun             #Packet tunnel.
device          pty             #Pseudo-ttys (telnet etc)
device          gif             #IPv6 and IPv4 tunneling
device          faith           #IPv6-to-IPv4 relaying (translation)
device          stf             #6to4 IPv6 over IPv4 encapsulation
device          bpf             #Berkeley packet filter
device          cbb             #Cardbus (yenta) bridge
device          pccard          #PC Card (16-bit) bus
device          cardbus         #CardBus (32-bit) bus
#device         pcic            #ISA attachment currently busted
device          uhci            #UHCI PCI->USB interface
device          ohci            #OHCI PCI->USB interface
#device         ehci
device          usb             #USB Bus (required)
device          ugen            #Generic
device          uhid            #"Human Interface Devices"
device          ukbd            #Keyboard
device          ulpt            #Printer
device          umass           #Disks/Mass storage - Requires scbus and da
device          ums             #Mouse
device          urio            #Diamond Rio 500 MP3 player
device          uscanner        #Scanners
device          firewire        #FireWire bus code
device          sbp             #SCSI over FireWire (Requires scbus and da)
device          fwe             #Ethernet over FireWire (non-standard!)



Everything seems to work so far with one exception:

%mozilla
Error: No running window found.
Bus error
Aug 26 13:08:11 ghast kernel: pid 905 (mozilla-bin), uid 120: exited on
signal 10

I recompiled it and now I get this error (I was at 1.5, and wanted to
update to 1.7.2).  I'm guessing I need to recompile a bunch of stuff upon
which it's dependent and then compile it again.  I used the port to build
it.

Jamie Bowden

-- 
"It was half way to Rivendell when the drugs began to take hold"
Hunter S Tolkien "Fear and Loathing in Barad Dur"
Iain Bowen <alaric_at_alaric.org.uk>
Received on Thu Aug 26 2004 - 15:23:16 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:08 UTC