5.3 Beta2 boot problems

From: Elliot Finley <efinley_at_efinley.com>
Date: Sat, 28 Aug 2004 10:48:20 -0600
This is on an ASUS P4P800 GENERIC kernel.

If I let the machine try to boot normally (hands off, or option 1 [default])
I get:

ACPI autoload failed - no such file or directory

as the first line, and it fails to boot.

If I choose option 2 (ACPI Disabled) then I don't get the 'ACPI autoload
failed' line, but it still fails to boot.  (see my previous message '5.3
Beta1 boot problems' for failure)

If I choose option 2 (Safe mode) I get the following failure mode:

------------------------------------------------------------------
Fatal trap 9: general protection fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer    = 0x58 :0x2dac
stack pointer            = 0x10 :0xf80
frame pointer            = 0x10 :0x0
code segment            = base 0xc00f0000, limit 0xffff, type 0x1b
                                = DPL 0, pres 1, def32 0, gran 0
processor eflags        = interrupt enabled, resume, IOPL = 0
current process        = 0 (swapper)
[thread 0]
Stopped at 0x2dac: *** error reading from address 2dac ***
------------------------------------------------------------------

Starting with option 4 (Single user) fails with the 'ACPI autoload failed'
line.

Starting with option 5 (Verbos logging) fails with the 'ACPI autoload
failed' line.

Starting with option 6 (Escape to loader prompt) gets me to the loader
prompt.  If I then type 'boot-conf', it boots just fine.

I would really really like to get this problem fixed before 5.3-Release
(Booting worked fine as of 5.2-CURRENT 8-4-2004).  This is a spare machine,
so I can take any steps necessary to help debug this.  I can also grant
access to anybody willing to work on this problem.

Please let me know what I can do to help resolve this problem.

dmesg from successful 'boot-conf' boot follows:

oregon root:~#>dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #9: Sat Aug 28 09:29:05 MDT 2004
    root_at_oregon.etv.net:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2598.76-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1072889856 (1023 MB)
avail memory = 1040351232 (992 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16
at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem
0xfeafc000-0xfeafffff irq 22 at device 5.0 on pci2
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0c:6e:54:4b:25
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
skc0: [GIANT-LOCKED]
atapci0: <Promise PDC20319 SATA150 controller> port
0xdc00-0xdc7f,0xdfa0-0xdfaf,0xdf00-0xdf3f mem
0xfeac0000-0xfeadffff,0xfeafb000-0xfeafbfff irq 21 at device 9.0 on pci2
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
ata5: channel #3 on atapci0
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xde80-0xdebf mem
0xfeaa0000-0xfeabffff,0xfeafa000-0xfeafafff irq 23 at device 11.0 on pci2
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:d1:f7:ad
fxp0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port
0xef60-0xef6f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 18
at device 31.2 on pci0
ata6: channel #0 on atapci2
ata7: channel #1 on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2e8-0x2ef irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2598759924 Hz quality 800
Timecounters tick every 10.000 msec
ATAPI_RESET time = 80us
acd0: CDROM <FX54++M/Y01E> at ata0-master UDMA33
ad12: 76319MB <ST380013AS/3.05> [155061/16/63] at ata6-master SATA150
ad14: 76319MB <ST380013AS/3.05> [155061/16/63] at ata7-master SATA150
Mounting root from ufs:/dev/ad12s1a
Received on Sat Aug 28 2004 - 14:48:22 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:09 UTC