Re: High rate traffic silence an em interface.

Iasen Kostov wrote:

> 1.44.2.4 and still disapperaing em0 ...
>
> em0_at_pci2:1:0:   class=0x020000 card=0x80f71043 chip=0x10198086 
> rev=0x00 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82547EI Gigabit Ethernet Controller (LOM)'
>    class    = network
>    subclass = ethernet 

I have same problem with re0 (*Edimax* EN-9230TX-32). Dissappears also 
without any traffic.

ifconfig:
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 10.0.0.10 netmask 0xffffff00 broadcast 10.0.0.255
        inet 10.0.0.20 netmask 0xffffffff broadcast 10.0.0.20
        ether 00:0e:2e:20:29:7c
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

pciconf:
re0_at_pci0:13:0:  class=0x020000 card=0x816910ec chip=0x816910ec rev=0x10 
hdr=0x00
    vendor   = 'Realtek Semiconductor'
    device   = 'RTL8169 Gigabit Ethernet Adapter'
    class    = network
    subclass = ethernet

dmesg:
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xb400-0xb4ff mem 
0xd3800000-0xd38000ff irq 4 at device 13.0 on pci0
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto

uname -a:
FreeBSD olutseura.ath.cx 5.3-STABLE FreeBSD 5.3-STABLE #0: Sun Nov 21 
14:18:23 EET 2004     
root_at_olutseura.ath.cx:/usr/obj/usr/src/sys/OLUTSEURA  i386