I have recently picked up Linksys WPC55AG Atheros-based card. With the latest changes to the 'ath' driver it has been working quite well in both WEP and non-secure environments. However, it had demonstrated some odd behavior in somewhat nonstandard situation. I have place where my AP (WEP, no SSID broadcast) has give or take same signal strength as my neighbor's AP (no WEP, broadcasted SSID). As soon as I come near that point, Atheros card would go into scanning mode (as judged by visible lights and output caused by '80211debug state') and never comes back out. Moving laptop closer to my AP and configuring card down and up would bring it back to life and it would stay connected for prolonged periods of time. My Broadcom-based Belkin F5D7050 used with NDIS wrapper does not demonstrate any such behavior. Atheros-based card works fine with Windows on the same laptop and with FreeBSD 5.3 (mid-November) on the different laptop. I am running -current as of late December 16 (EST). Output below illustrates properties of the place where problem occurs (as reported by ndis-wrapped card). # wicontrol ndis0 -l 2 stations: ap[0]: netname (SSID): [ linksys ] BSSID: [ 00:12:17:01:d7:43 ] Channel: [ 6 ] Quality/Signal/Noise [signal]: [ 83 / 83 / 0 ] [dBm]: [ 83 / -66 / -149 ] BSS Beacon Interval [msec]: [ 0 ] Capinfo: [ ] ap[1]: netname (SSID): [ XXXXXXXXXXX ] BSSID: [ XX:XX:XX:XX:XX:XX ] Channel: [ 11 ] Quality/Signal/Noise [signal]: [ 84 / 84 / 0 ] [dBm]: [ 84 / -65 / -149 ] BSS Beacon Interval [msec]: [ 0 ] Capinfo: [ WEP ] # I am not sure what additional info I can provide to troubleshoot this problem, but if there is some or if there is a patch to test, I would be glad to oblige (provided that my neighbor would not shut his AP down in the meantime ;). -- Alexandre "Sunny" Kovalenko (Олександр Коваленко)Received on Sat Dec 18 2004 - 01:55:24 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:24 UTC