Ruslan Ermilov wrote: >>Hmm, on the exact same controller with two SATA drives on it and stock >>current it "just works" (tm) here, I cannot reproduce the problem... >>Are you sure its a stock GENERIC kernel with no local mods/patches ? >> > Yes. This is the Asus SK8N motherboard, but I only have one PATA > drive attached to 3rd (PATA) channel; first two channels (SATA) > don't have any drives attached. Can you check in this configuration? atapci0: <Promise PDC20378 SATA150 controller> port 0xb800-0xb87f,0xd000-0xd00f,0xd400-0xd43f mem 0xfc800000-0xfc81ffff,0xfd000000-0xfd000fff irq 18 at device 5.0 on pci0 atapci0: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 ata4: channel #2 on atapci0 ... atapci1: <ServerWorks ROSB4 UDMA33 controller> port 0xb000-0xb00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 ... ad0: 13042MB <IBM-DPTA-371360/P74OA30A> [26500/16/63] at ata0-master UDMA33 acd0: DVDRAM <HITACHI GF-1000 B/I002> at ata0-slave PIO4 afd0: REMOVABLE <LS-120 VER5 00 UHD Floppy/F515M59V> at ata1-master PIO3 acd1: CDRW <GENERIC CRD-BP1400P/5.29> at ata1-slave PIO4 ad1: 38166MB <ST340016A/3.19> [77545/16/63] at ata4-master UDMA100 That works just as well... -- -SørenReceived on Mon Dec 27 2004 - 15:39:42 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:25 UTC