Re: AE_AML_INVALID_RESOURCE_TYPE error in 5.2-CURRENT

On Wednesday 04 February 2004 03:35 pm, Jeff Klein wrote:
> Hi All,
>
> I cvsup'ed to the latest and ran "make buildworld" last night (about 7pm
> PST).  I was previously running 5.1-RELEASE, but was having problems
> with SMP support.  The good news is that the SMP support (w/ device
> apic) seems to be working well now, but the bad news is that I am
> getting a new error in the kernel at boot time:
>
> can't fetch resources for \\_SB_.LN1_ - AE_AML_INVALID_RESOURCE_TYPE
>
> -and-
>
> pcib0: couldn't get PCI interrupt link device _CRS data -
> AE_AML_INVALID_RESOURCE_TYPE
>
> This doesn't seem to be causing any serious problems so far, but I have
> only been running on it for less than 24 hours, so it is too early to
> tell.  Does anyone know if this is serious? (and if there is a
> fix/workaround?). Output from dmesg is below.

From your dmesg it doesn't appear serious.  Does it go away if you tell your 
BIOS to allocate an IRQ for the VGA device?  Also, can you add a printf to 
make it print out what the resource type is when it prints that error message 
perhaps?

> Thanks and regards,
> Jeff Klein
>
> ------------------------- dmesg output -----------------------------
>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights
> reserved. FreeBSD 5.2-CURRENT #1: Tue Feb  3 23:43:49 PST 2004
>     root_at_weckl:/usr/obj/usr/src/sys/WECKL
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ff000. Preloaded elf
> module "/boot/kernel/acpi.ko" at 0xc07ff26c.
> ACPI APIC Table: <INTEL  	 APIC  >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.67-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
> ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 1073741824 (1024 MB)
> avail memory = 1045336064 (996 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>  cpu2 (AP): APIC ID:  6
>  cpu3 (AP): APIC ID:  7
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> Pentium Pro MTRR support enabled
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <INTEL   RSDT> on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 16 entries at 0xc00fdec0
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> can't fetch resources for \\_SB_.LN1_ - AE_AML_INVALID_RESOURCE_TYPE
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> acpi_cpu2: <CPU> on acpi0
> acpi_cpu3: <CPU> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> acpi_button1: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: couldn't get PCI interrupt link device _CRS data -
> AE_AML_INVALID_RESOURCE_TYPE
> pci0: <display, VGA> at device 2.0 (no driver attached)
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0x2400-0x243f mem
> 0xfc000000-0xfc01ffff,0xfc021000-0xfc021fff irq 18 at device 3.0 on pci0
> fxp0: Ethernet address 00:02:b3:52:36:7b
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <ServerWorks CSB5 UDMA100 controller> port
> 0x2440-0x244f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
> 15.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> ohci0: <OHCI (generic) USB controller> mem 0xfc022000-0xfc022fff irq 10
> at device 15.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pci1: <ACPI PCI bus> on pcib1
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port
> 0x2460-0x247f mem 0xfc300000-0xfc31ffff,0xfc320000-0xfc33ffff irq 19 at
> device 4.0 on pci1
> em0:  Speed:N/A  Duplex:N/A
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci2: <ACPI PCI bus> on pcib2
> ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2800-0x28ff mem
> 0xfc700000-0xfc700fff irq 16 at device 9.0 on pci2
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem
> 0xfc701000-0xfc701fff irq 17 at device 9.1 on pci2
> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse Explorer, device ID 4
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> acpi_ec0: <Embedded Controller: GPE 0x35> port 0xca7,0xca6 on acpi0
> pmtimer0 on isa0
> orm0: <Option ROMs> at iomem
> 0xcb000-0xd0fff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
> sc0: <System console> on isa0
> sc0: VGA <16 virtual consoles, flags=0x200>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0 Timecounters tick every 10.000 msec
> acd0: CDRW <YAMAHA CRW2100E> at ata0-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <QUANTUM ATLAS 10K 9WLS UC81> Fixed Direct Access SCSI-3 device
> da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged
> Queueing Enabled
> da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> Mounting root from ufs:/dev/da0s1a
> em0: Link is up 100 Mbps Full Duplex
>
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"

-- 
John Baldwin <jhb_at_FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org