what controller are you using for sata? Axel Gonzalez wrote: > Evren Yurtesen wrote: > >>Hello, I have a system which had problems with the following errors >>after working perfectly for 2 days. Is there any suggestions about what >>can I do about this? else than checking the cables :) I think the drives >>work fine also. They were doing pretty fine with another mainboard. > > > > When under heavy load, i get the error (just tested from a cvsup 09/02/2004 > src): > > ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=... > ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=... > > sometimes it crashes right away, sometimes it waits a little. > > can't get the exact LBA sectors because the system crashes cold, and its not > logged (i've seen the error before a crash) > > Using a previous kernel snapshot (around jan 20, 2004), i can work normally, > even with heavy loads. > > > The relevant system data: > > Feb 9 06:48:06 kernel: ACPI APIC Table: <INTEL D875BZLK> > Feb 9 06:48:06 moonlight kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz > (2394.01-MHz 686-class CPU) > Feb 9 06:48:06 moonlight kernel: Origin = "GenuineIntel" Id = 0xf29 > Stepping = 9 > Feb 9 06:48:06 moonlight kernel: > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,A > PIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Feb 9 06:48:06 moonlight kernel: Hyperthreading: 2 logical CPUs > ... > > Feb 9 06:48:06 moonlight kernel: ata0: at 0x1f0 irq 14 on atapci0 > Feb 9 06:48:06 moonlight kernel: ata0: [MPSAFE] > Feb 9 06:48:06 moonlight kernel: ata1: at 0x170 irq 15 on atapci0 > Feb 9 06:48:06 moonlight kernel: ata1: [MPSAFE] > Feb 9 06:48:06 moonlight kernel: atapci1: <Intel ICH5 SATA150 controller> > port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 > irq 18 at device 31.2 on pci0 > Feb 9 06:48:06 moonlight kernel: atapci1: [MPSAFE] > Feb 9 06:48:06 moonlight kernel: ata2: at 0xec00 on atapci1 > Feb 9 06:48:06 moonlight kernel: ata2: [MPSAFE] > Feb 9 06:48:06 moonlight kernel: ata3: at 0xe400 on atapci1 > Feb 9 06:48:06 moonlight kernel: ata3: [MPSAFE] > Feb 9 06:48:06 moonlight kernel: pci0: <serial bus, SMBus> at device 31.3 (no > driver attached) > > ... > > Feb 9 06:48:06 moonlight kernel: GEOM: create disk ad0 dp=0xc44aa160 > Feb 9 06:48:06 moonlight kernel: ad0: 57241MB <ST360020A> [116301/16/63] at > ata0-master UDMA100 > Feb 9 06:48:06 moonlight kernel: acd0: CDRW <LITE-ON LTR-52246S> at > ata1-master PIO4 > Feb 9 06:48:06 moonlight kernel: GEOM: create disk ad4 dp=0xc459a360 > Feb 9 06:48:06 moonlight kernel: ad4: 78167MB <Maxtor 6Y080M0> [158816/16/63] > at ata2-master UDMA100 > Feb 9 06:48:06 moonlight kernel: GEOM: create disk cd0 dp=0xc449d600 > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Mon Feb 09 2004 - 05:24:23 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:42 UTC