Re: Bad interrupt routing causes my SATA controller to fail.

what is your board model?

Johan Pettersson wrote:

> Some days ago I posted this bug-report.
> 
> http://www.freebsd.org/cgi/query-pr.cgi?pr=62440
> 
> It's written there that it isn't any problem with the ATA driver and that it must be bad interrupt routing. I have disabled Hyperthreading in the BIOS and it works fine now but it would be nice if HTT worked. Is there any work on this? Or someone that feels to fix it? :)
> 
> FreeBSD beard.demonized.net 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Tue Feb 10 14:35:42 CET 2004     manlix_at_beard.demonized.net:/usr/obj/usr/src/sys/BEARD  i386
> 
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.2-CURRENT #0: Tue Feb 10 14:35:42 CET 2004
>     manlix_at_beard.demonized.net:/usr/obj/usr/src/sys/BEARD
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0797000.
> Preloaded elf module "/boot/kernel/vesa.ko" at 0xc079721c.
> Preloaded elf module "/boot/kernel/linux.ko" at 0xc07972c8.
> Preloaded elf module "/boot/kernel/if_sk.ko" at 0xc0797374.
> Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0797420.
> Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc07974cc.
> Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc079757c.
> Preloaded elf module "/boot/kernel/uhid.ko" at 0xc0797628.
> Preloaded elf module "/boot/kernel/ums.ko" at 0xc07976d4.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc079777c.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2398.85-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 536018944 (511 MB)
> avail memory = 518975488 (494 MB)
> ACPI APIC Table: <A M I  OEMAPIC >
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> Pentium Pro MTRR support enabled
> VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc06d39a2 (1000022)
> VESA: NVidia
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <A M I OEMXSDT> on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 14 entries at 0xc00f50e0
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 at device 29.0 on pci0
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 at device 29.1 on pci0
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 at device 29.2 on pci0
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 at device 29.3 on pci0
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 22 at device 5.0 on pci2
> skc0: 3Com Gigabit LOM (3C940)
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:0c:6e:4e:e2:13
> miibus0: <MII bus> on sk0
> e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
> pcm0: <Creative EMU10K1> port 0xdf80-0xdf9f irq 21 at device 13.0 on pci2
> pcm0: <SigmaTel STAC9708/11 AC97 Codec>
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> atapci1: <Intel ICH5 SATA150 controller> port 0xef60-0xef6f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 18 at device 31.2 on pci0
> atapci1: [MPSAFE]
> ata2: at 0xefe0 on atapci1
> ata2: [MPSAFE]
> ata3: at 0xefa0 on atapci1
> ata3: [MPSAFE]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> pmtimer0 on isa0
> orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2398854572 Hz quality 800
> Timecounters tick every 10.000 msec
> acd0: CDRW <LITE-ON LTR-24102B> at ata1-master UDMA33
> ad4: 152627MB <ST3160023AS> [310101/16/63] at ata2-master UDMA100
> Mounting root from ufs:/dev/ad4s1a
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"