TDK VeloCD and 5.2.1-RC2

From: Russell Hanneken <rghanneken_at_pobox.com>
Date: Sun, 15 Feb 2004 14:41:33 -0800
Just wanted to report my experience with a TDK VeloCD 48x16x48 CD-RW
drive (the model number is 4800B) and FreeBSD 5.2.1-RC2.

When I boot, I get this message:

ata1-master: FAILURE - SETFEATURES SET TRANSFER MODE no interrupt
ata1-master: FAILURE - SETFEATURES SET TRANSFER MODE no interrupt
acd0: CDRW <TDK CDRW4800B> at ata1-master BIOSPIO
acd1: DVDROM <TOSHIBA DVD-ROM SD-M1502> at ata1-slave UDMA33

This behavior is actually an improvement over that of 5.2-RELEASE-p2.
With 5.2-RELEASE-p2, I would see similar failure messages at boot, and
then the system would freeze up, unless I booted with a CD in the
drive.  I gather people with LITE-ON CD-RW drives had a similar
experience.  Apparently my TDK drive is broken in the same way as the
LITE-ON drives.

-- 
Russell Hanneken
rghanneken_at_pobox.com
Remove the 'g' from my address to send me mail.
Received on Sun Feb 15 2004 - 13:41:34 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:43 UTC