mlx driver related kernel panic in Freebsd 5.2.1-RELEASE

From: Dexter McNeil <dexter_at_backtech.com>
Date: Thu, 26 Feb 2004 18:37:49 -0500
OK, I seem to be able to get FreeBSD 5.2.1-RELEASE to reliably panic with
a "panic: free: address 0xd8d5e000(0xd8d5e000) has not been allocated." on
the serial console when it crashes.

I'm doing two copies of the entire ports collection to seperate
subdirectories when the crash occurs. It seems to do this regardless of

The machine is an IBM Netfinity 5500 with 4 x 550Mhz P3 Xeon CPUS, 2gigs
of ram and a Mylex DAC1100 RAID controller. There are 6 73G disks attached
to channel 0 of the controller, 5 disks are in a RAID 5 array, the sixth
is a hot spare.

Any ideas?



A 'trace' at the db> prompt yields:

cpuid = 2; 
Debugger("panic")
Stopped at      Debugger+0x55:  xchgl   %ebx,in_Debugger.0
db> trace
Debugger(c06d1f22,2,c06d07e3,e257dc30,100) at Debugger+0x55
panic(c06d07e3,d8d5e000,d8d5e000,0,c06d07a4) at panic+0x156
free(d8d5e000,c0705300,1,0,c0522975) at free+0xa3
mlx_enquire(c8277000,c,c,c04c3b60,d8) at mlx_enquire+0xef
mlx_periodic(c8277000,0,c06d2fed,d8,1) at mlx_periodic+0x174
softclock(0,0,c06cfc87,23a,c81d4a98) at softclock+0x1b8
ithread_loop(c42f1f00,e257dd48,c06cfaed,311,0) at ithread_loop+0x192
fork_exit(c0518350,c42f1f00,e257dd48) at fork_exit+0xb4
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xe257dd7c, ebp = 0 ---


Below are the dmesg.boot and the kernel config files. 

dmesg.boot:

cam: using minimum scsi_delay (100ms)
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #5: Thu Feb 26 15:06:03 EST 2004
    dexter_at_test5.backtech.com:/usr/obj/usr/src/sys/Netfinity5500
Preloaded elf kernel "/boot/kernel/kernel" at 0xc085d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc085d21c.
ACPI APIC Table: <IBM    SERKQUAD>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (547.59-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 2147463168 (2047 MB)
avail memory = 2080808960 (1984 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  3
 cpu1 (AP): APIC ID:  0
 cpu2 (AP): APIC ID:  1
 cpu3 (AP): APIC ID:  2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    SERKQUAD> on motherboard
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfd08-0xfd0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKVP._PRS] (Node 0xc8250ea0), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKVP._PRS] (Node 0xc8250ea0), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK5A._PRS] (Node 0xc42ef400), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK5A._PRS] (Node 0xc42ef400), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK5B._PRS] (Node 0xc42ef300), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK5B._PRS] (Node 0xc42ef300), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK5C._PRS] (Node 0xc42ef200), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK5C._PRS] (Node 0xc42ef200), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK5D._PRS] (Node 0xc8251240), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK5D._PRS] (Node 0xc8251240), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK6A._PRS] (Node 0xc42ef800), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK6A._PRS] (Node 0xc42ef800), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK6B._PRS] (Node 0xc42ef700), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK6B._PRS] (Node 0xc42ef700), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK6C._PRS] (Node 0xc42ef600), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK6C._PRS] (Node 0xc42ef600), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK6D._PRS] (Node 0xc42ef500), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK6D._PRS] (Node 0xc42ef500), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKNE._PRS] (Node 0xc8251040), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKNE._PRS] (Node 0xc8251040), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKS3._PRS] (Node 0xc8251140), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKS3._PRS] (Node 0xc8251140), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKUS._PRS] (Node 0xc8250da0), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKUS._PRS] (Node 0xc8250da0), AE_AML_BUFFER_LIMIT
pci0: <ACPI PCI bus> on pcib0
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKVP._PRS] (Node 0xc8250ea0), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKVP._PRS] (Node 0xc8250ea0), AE_AML_BUFFER_LIMIT
pcib0: couldn't get PCI interrupt link device _PRS data - AE_AML_BUFFER_LIMIT
pcib0: slot 3 INTA is routed to irq 11
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LK5A._PRS] (Node 0xc42ef400), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LK5A._PRS] (Node 0xc42ef400), AE_AML_BUFFER_LIMIT
pcib0: couldn't get PCI interrupt link device _PRS data - AE_AML_BUFFER_LIMIT
pcib0: slot 5 INTA is routed to irq 10
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKNE._PRS] (Node 0xc8251040), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKNE._PRS] (Node 0xc8251040), AE_AML_BUFFER_LIMIT
pcib0: couldn't get PCI interrupt link device _PRS data - AE_AML_BUFFER_LIMIT
pcib0: slot 14 INTA is routed to irq 11
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKS3._PRS] (Node 0xc8251140), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKS3._PRS] (Node 0xc8251140), AE_AML_BUFFER_LIMIT
pcib0: couldn't get PCI interrupt link device _PRS data - AE_AML_BUFFER_LIMIT
pcib0: slot 15 INTA is routed to irq 9
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LKUS._PRS] (Node 0xc8250da0), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LKUS._PRS] (Node 0xc8250da0), AE_AML_BUFFER_LIMIT
pcib0: couldn't get PCI interrupt link device _PRS data - AE_AML_BUFFER_LIMIT
pcib0: slot 19 INTD is routed to irq 10
pci0: <mass storage, SCSI> at device 3.0 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x2180-0x219f mem 0xfea00000-0xfeafffff,0xf7fff000-0xf7ffffff irq 10 at device 5.0 on pci0
fxp0: Ethernet address 00:08:c7:2b:b6:f2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0x21a0-0x21bf mem 0xfebfdc00-0xfebfdc1f irq 11 at device 14.0 on pci0
pcn0: Ethernet address: 00:06:29:38:cf:c1
miibus1: <MII bus> on pcn0
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 15.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 19.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 19.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 19.3 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK1A._PRS] (Node 0xc8251f20), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK1A._PRS] (Node 0xc8251f20), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK1B._PRS] (Node 0xc8251e20), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK1B._PRS] (Node 0xc8251e20), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK1C._PRS] (Node 0xc8251d20), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK1C._PRS] (Node 0xc8251d20), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK1D._PRS] (Node 0xc8251c20), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK1D._PRS] (Node 0xc8251c20), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK2A._PRS] (Node 0xc8250280), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK2A._PRS] (Node 0xc8250280), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK2B._PRS] (Node 0xc82542c0), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK2B._PRS] (Node 0xc82542c0), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK2C._PRS] (Node 0xc82541c0), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK2C._PRS] (Node 0xc82541c0), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK2D._PRS] (Node 0xc82540c0), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK2D._PRS] (Node 0xc82540c0), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK3A._PRS] (Node 0xc8250680), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK3A._PRS] (Node 0xc8250680), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK3B._PRS] (Node 0xc8250580), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK3B._PRS] (Node 0xc8250580), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK3C._PRS] (Node 0xc8250480), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK3C._PRS] (Node 0xc8250480), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK3D._PRS] (Node 0xc8250380), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK3D._PRS] (Node 0xc8250380), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK4A._PRS] (Node 0xc8250a80), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK4A._PRS] (Node 0xc8250a80), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK4B._PRS] (Node 0xc8250980), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK4B._PRS] (Node 0xc8250980), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK4C._PRS] (Node 0xc8250880), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK4C._PRS] (Node 0xc8250880), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK4D._PRS] (Node 0xc8250780), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK4D._PRS] (Node 0xc8250780), AE_AML_BUFFER_LIMIT
pci1: <ACPI PCI bus> on pcib1
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK2A._PRS] (Node 0xc8250280), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK2A._PRS] (Node 0xc8250280), AE_AML_BUFFER_LIMIT
pcib1: couldn't get PCI interrupt link device _PRS data - AE_AML_BUFFER_LIMIT
pcib1: slot 2 INTA is routed to irq 9
    ACPI-1287: *** Error: Method execution failed [\\GMAI] (Node 0xc42e5e60), AE_AML_BUFFER_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI1.LK3A._PRS] (Node 0xc8250680), AE_AML_BUFFER_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI1.LK3A._PRS] (Node 0xc8250680), AE_AML_BUFFER_LIMIT
pcib1: couldn't get PCI interrupt link device _PRS data - AE_AML_BUFFER_LIMIT
pcib1: slot 3 INTA is routed to irq 10
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4700-0x473f mem 0xf7e00000-0xf7efffff,0xf7fef000-0xf7feffff irq 9 at device 2.0 on pci1
fxp1: Ethernet address 00:90:27:88:98:3d
miibus2: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus2
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel 82559 Pro/100 Ethernet> port 0x4740-0x477f mem 0xf7d00000-0xf7dfffff,0xf7fee000-0xf7feefff irq 10 at device 3.0 on pci1
fxp2: Ethernet address 00:90:27:88:b7:7f
miibus3: <MII bus> on fxp2
inphy2: <i82555 10/100 media interface> on miibus3
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci1
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI1.SLT4 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
mlx0: <Mylex version 5 RAID interface> port 0x5100-0x517f mem 0xf2000000-0xf3ffffff,0xf7810000-0xf781007f irq 11 at device 8.0 on pci2
mlx0: controller initialisation in progress...
mlx0: initialisation complete.
mlx0: DAC1164PVX, 3 channels, firmware 5.08-0-87, 32MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 280028MB (573497344 sectors) RAID 5 (online)
GEOM: create disk mlxd0 dp=0xc8266c8c
pci2: <mass storage, RAID> at device 9.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <Option ROMs> at iomem 0xd0800-0xd2fff,0xd0000-0xd07ff,0xc8000-0xcffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <CRD-8400B> at ata0-master PIO4
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/mlxd0s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
/home: superblock summary recomputed
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted


The kernel config file is:


machine		i386
cpu		I686_CPU
ident		Netfinity5500

#To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		#Default places to look for devices.

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	SCHED_ULE 		#ULE scheduler
options 	INET			#InterNETworking
#options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MD_ROOT			#MD is a potential root device
options 	NFSCLIENT		#Network Filesystem Client
options 	NFSSERVER		#Network Filesystem Server
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
options 	SCSI_DELAY=0		#Delay (in ms) before probing SCSI
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.
options 	PFIL_HOOKS		# pfil(9) framework

# Debugging for use in -current
options 	DDB			#Enable the kernel debugger
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
options 	WITNESS			#Enable checks to detect deadlocks and cycles
options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed

# To make an SMP kernel, the next two are needed
options 	SMP			# Symmetric MultiProcessor Kernel
device		apic			# I/O APIC

device		isa
#device		eisa
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		ataraid			# ATA RAID drives
device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		ahd		# AHA39320/29320 and onboard AIC79xx devices

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device		amr		# AMI MegaRAID
#device		ips		# IBM (Adaptec) ServeRAID
device		mly		# Mylex AcceleRAID/eXtremeRAID

# RAID controllers
#device		aac		# Adaptec FSA RAID
#device		aacp		# SCSI passthrough for aac (requires CAM)
device		mlx		# Mylex DAC960 family

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

# Enable this for the pcvt (VT220 compatible) console driver
#device		vt
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
#device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter


-- 
The ultimate destination on the journey of life is a hole 6 feet deep.
Enjoy the journey - the destination is nothing to write home about.
Received on Thu Feb 26 2004 - 14:37:55 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:44 UTC