Hello. Can you help me? I can't get my wireless card working in FreeBSD-CURRENT (freshly installed yesterday 5.2.1 and cvsuped to CURRENT, GENERIC kernel). I have HP Pavilion ze5470 laptop with integrated Broadcom wireless card. I'm trying to use ndisimulator for it, but when I load if_ndis module, I get kernel panic ---------------------------------------------------------- ndis0: <HP WLAN 54g W450 Network Adapter> mem 0xd0002000-0xd0003fff at device 9.0 on pci0 panic: nexus_setup_intr: NULL irq resource! at line 468 in file /usr/src/sys/i386/i386/nexus.c cpuid=0; Debugger("panic") ----------------------------------------------------------- Lines in dmesg (I put full dmesg output in the end) about this card are ----------------------------------------------------------- found-> vendor=0x14e4, dev=0x4320, revid=0x02 bus=0, slot=9, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0004000, size 12, memory disabled ... pci0: <network> at device 9.0 (no driver attached) ----------------------------------------------------------- I get this with enabled acpi; without acpi system doesn't want to start - it hangs when mounting root. About my laptop: it has a button for turning wireless on, but I et the same result with this button pressed/not pressed (I think this button is there only for windows - linux doesn't care about it, in linux card works regardless of button state); I have phoenix bios; bios setup allows only to change time, boot sequence, something about mouse and there is some "disk check". There is no "PNP OS" setting or something. Any suggestions? Thank you, Yevgen. ----------------------------------------------------------- Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Sun Feb 29 04:26:12 CST 2004 root_at_mlap.muntyan.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a9d000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a9d26c. Calibrating clock(s) ... i8254 clock: 1193181 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2658297856 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2658.30-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 469172224 (447 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000001b761fff, 447975424 bytes (109369 pages) avail memory = 449372160 (428 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6a80 bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd750+0x14b pnpbios: Found PnP BIOS data at 0xc00f6ae0 pnpbios: Entry = f0000:afea Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80008004 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cbb21002) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x01 7 10 embedded 0 11 A 0x03 7 10 embedded 0 11 B 0x04 7 10 embedded 0 11 C 0x02 7 11 embedded 0 8 A 0x07 7 10 embedded 0 6 A 0x08 5 embedded 0 9 A 0x04 7 10 embedded 0 9 B 0x03 7 10 embedded 0 10 A 0x06 7 11 embedded 0 18 A 0x02 7 10 embedded 0 12 A 0x06 7 11 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 7, width = 5 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0 \\_SB_.PCI0.ISA_.LNK6 irq 0: [ 7 10] low,level,sharable 0.8.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.9.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.9.1 \\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.11.1 \\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.11.2 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNK1 irq 10: [ 7 10] low,level,sharable 0.18.0 ---- before setting priority for links ------------ \\_SB_.PCI0.ISA_.LNK6: interrupts: 7 10 penalty: 1110 710 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.ISA_.LNK6: interrupts: 7 10 penalty: 1110 710 references: 1 priority: 910 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0 \\_SB_.PCI0.ISA_.LNK6 irq 10: [ 7 10] low,level,sharable 0.8.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.9.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.9.1 \\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.11.1 \\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.11.2 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNK1 irq 10: [ 7 10] low,level,sharable 0.18.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d4000000, size 26, enabled map[14]: type 3, range 32, base d0007000, size 12, enabled found-> vendor=0x1002, dev=0xcbb2, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x7010, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00001000, size 8, enabled map[14]: type 1, range 32, base d0000000, size 12, memory disabled pcib0: matched entry for 0.6.INTA (source \\_SB_.PCI0.ISA_.LNK7) pcib0: slot 6 INTA is routed to irq 5 found-> vendor=0x10b9, dev=0x5451, revid=0x02 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base d0001000, size 12, memory disabled map[14]: type 4, range 32, base 00001400, size 8, port disabled found-> vendor=0x10b9, dev=0x5457, revid=0x00 bus=0, slot=8, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0002000, size 13, memory disabled found-> vendor=0x14e4, dev=0x4320, revid=0x02 bus=0, slot=9, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0004000, size 12, memory disabled pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNK5) pcib0: slot 10 INTA is routed to irq 11 found-> vendor=0x1217, dev=0x6972, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00002000, size 5, enabled pcib0: matched entry for 0.11.INTA (source \\_SB_.PCI0.ISA_.LNK2) pcib0: slot 11 INTA is routed to irq 10 found-> vendor=0x1106, dev=0x3038, revid=0x50 bus=0, slot=11, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00002020, size 5, enabled pcib0: matched entry for 0.11.INTB (source \\_SB_.PCI0.ISA_.LNK3) pcib0: slot 11 INTB is routed to irq 10 found-> vendor=0x1106, dev=0x3038, revid=0x50 bus=0, slot=11, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0005000, size 8, memory disabled found-> vendor=0x1106, dev=0x3104, revid=0x51 bus=0, slot=11, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0010, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0005800, size 11, memory disabled map[14]: type 1, range 32, base d0008000, size 14, enabled found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=0, slot=12, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0010, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00002040, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc4 bus=0, slot=16, func=0 class=01-01-fa, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 1, range 32, base d0006000, size 12, enabled pcib0: matched entry for 0.18.INTA (source \\_SB_.PCI0.ISA_.LNK1) pcib0: slot 18 INTA is routed to irq 10 found-> vendor=0x100b, dev=0x0020, revid=0x00 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x5a (2700 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xd0300000-0xd03fffff pcib1: prefetched decode 0xd8000000-0xdfffffff ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNK0 irq 0: [ 7 10] low,level,sharable 1.5.0 ---- before setting priority for links ------------ \\_SB_.PCI0.ISA_.LNK0: interrupts: 7 10 penalty: 1220 920 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.ISA_.LNK0: interrupts: 7 10 penalty: 1220 920 references: 1 priority: 1070 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNK0 irq 10: [ 7 10] low,level,sharable 1.5.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d8000000, size 27, enabled map[14]: type 4, range 32, base 00009000, size 8, enabled map[18]: type 1, range 32, base d0300000, size 16, enabled found-> vendor=0x1002, dev=0x4337, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 5.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <simple comms> at device 8.0 (no driver attached) pci0: <network> at device 9.0 (no driver attached) cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> mem 0xd0004000-0xd0004fff irq 11 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x69721217 0x04100007 0x06070000 0x00024000 0x10: 0xd0004000 0x020000a0 0x20020200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 0x40: 0x0850103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01881882 0x90: 0x00008002 0x00000000 0x00000000 0x00000000 0xa0: 0xfe020001 0x00c04100 0x00000000 0x00000011 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 10 at device 11.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port error, restarting port 1 uhub0: port error, giving up port 1 uhub0: port error, restarting port 2 uhub0: port error, giving up port 2 uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 10 at device 11.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port error, restarting port 1 uhub1: port error, giving up port 1 uhub1: port error, restarting port 2 uhub1: port error, giving up port 2 pci0: <serial bus, USB> at device 11.2 (no driver attached) fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0xd0008000-0xd000bfff,0xd0005800-0xd0005fff at device 12.0 on pci0 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNK2) pcib0: slot 12 INTA is routed to irq 10 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:0d:9d:71:a0:47:ff:1c fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: phy read failed(2). fwohci0: fwphy_rddata: 0x3 loop=0, retry=1 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0d:9d:47:ff:1c fwe0: bpf attached sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) sbp_post_busreset fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x2040-0x204f at device 16.0 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached) sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x2400-0x24ff mem 0xd0006000-0xd0006fff irq 10 at device 18.0 on pci0 sis0: Silicon Revision: DP83816A sis0: Ethernet address: 00:0d:9d:46:b5:a2 miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x080017, model 0x0002, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 3 us acpi_ec0: info: new max delay is 10 us acpi_ec0: info: new max delay is 30 us fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: irq maps: 0x401 0x409 0x401 0x401 sio0 port 0x2f8-0x2ff irq 3 drq 3 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b 24 b3 00 6f 0d 0e 00 00 07 80 4a 80 8f 28 1f 47 6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b 24 b3 00 6f 0d 0e 00 00 07 80 4a 80 8f 28 1f 47 6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2658297856 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 1af0a000 OUTL ST2 ALL ALL 12 00000000 1af0a080 8411:0009 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 acpi_acad0: acline initialization start acpi_ec0: info: new max delay is 45 us acpi_ec0: info: new max delay is 80 us acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on AcerLabs Aladdin chip ata0-master: setting UDMA100 on AcerLabs Aladdin chip ad0: <IC25N080ATMR04-0/MO4OAD0A> ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin ata1-master: setting PIO4 on AcerLabs Aladdin chip acd0: <SONY DVD+RW DW-P50A/1.8e> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 8192KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20482812 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20482875 l:20466810 [2] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/254/63 s:40949685 l:1992060 [3] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:42941745 l:113354640 GEOM: Configure ad0s1, start 32256 length 10487199744 end 10487231999 GEOM: Configure ad0s2, start 10487232000 length 10479006720 end 20966238719 GEOM: Configure ad0s3, start 20966238720 length 1019934720 end 21986173439 GEOM: Configure ad0s4, start 21986173440 length 58037575680 end 80023749119 GEOM: Configure ad0s2a, start 1073741824 length 9405264896 end 10479006719 GEOM: Configure ad0s2b, start 0 length 1073741824 end 1073741823 GEOM: Configure ad0s2c, start 0 length 10479006720 end 10479006719 MBREXT Slice 5 on ad0s4: [0] f:00 typ:130 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:1991997 [1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:1992060 l:20000925 GEOM: Configure ad0s5, start 32256 length 1019902464 end 1019934719 MBREXT Slice 6 on ad0s4: [0] f:00 typ:131 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:20000862 [1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:21992985 l:91361655 GEOM: Configure ad0s6, start 1019966976 length 10240441344 end 11260408319 MBREXT Slice 7 on ad0s4: [0] f:00 typ:131 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:91361592 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s7, start 11260440576 length 46777135104 end 58037575679 bus_explore done sbp_post_explore (sbp_cold=2) (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted start_init: trying /sbin/init acpi_ec0: info: new max delay is 430 us acpi_ec0: info: new max delay is 800 us acpi_cmbat0: battery initialization failed, giving up warning: KLD '/boot/kernel/linux.ko' is newer than the linker.hints file Linux ELF exec handler installed acpi_ec0: info: new max delay is 11000 us fd0: autoselection failed fd0: autoselection failedReceived on Sun Feb 29 2004 - 16:03:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:45 UTC