I rebuilt my CURRENT kernel last week and ever since then I was noticing a very long pause in the boot that wasn't in there before. Here is the dmesg chunk on a boot -v: ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:00 typ:222 s(CHS):0/1/1 e(CHS):3/254/63 s:63 l:64197 [1] f:00 typ:12 s(CHS):4/0/1 e(CHS):1023/254/63 s:64260 l:45062325 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:57641220 l:20498940 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 32868864 end 32901119 GEOM: Configure ad0s2, start 32901120 length 23071910400 end 23104811519 GEOM: Configure ad0s3, start 29512304640 length 10495457280 end 40007761919 acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4240N/D110> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: 120mm audio disc GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s3b, start 268435456 length 1051303936 end 1319739391 GEOM: Configure ad0s3c, start 0 length 10495457280 end 10495457279 GEOM: Configure ad0s3d, start 1319739392 length 268435456 end 1588174847 GEOM: Configure ad0s3e, start 1588174848 length 268435456 end 1856610303 GEOM: Configure ad0s3f, start 1856610304 length 8638846976 end 10495457279 LONG (4-5 second) PAUSE HERE (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error Mounting root from ufs:/dev/ad0s3a It doesn't really bother me, was just curious if anyone knew what it was from. Full boot -v dmesg attached. -- Ryan "leadZERO" Sommers Gamer's Impact President ryans_at_gamersimpact.com ICQ: 1019590 AIM/MSN: leadZERO -= http://www.gamersimpact.com =- ity 0 Calibrating TSC clock ... TSC clock: 1994126400 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1994.13-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536748032 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000001f6b9fff, 514396160 bytes (125585 pages) avail memory = 515518464 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled ACPI: DSDT was overridden. ACPI-0374: *** Info: Table [DSDT] replaced by host OS npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086) pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00fbb90 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 D 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 29 func 1 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x8086, dev=0x1a30, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1a31, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.PCI0.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (source \\_SB_.PCI0.LNKC) pcib0: slot 29 INTC is routed to irq 11 found-> vendor=0x8086, dev=0x2487, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 0000bfa0, size 4, enabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc80, size 6, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000dc00, size 7, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ---- initial configuration ------------------------ \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 4, range 32, base 0000c000, size 8, enabled map[18]: type 1, range 32, base fcff0000, size 16, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.PCI0.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x4c66, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0xc000-0xc0ff mem 0xfcff0000-0xfcffffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe8000000 64MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: 4D Mouse USB Mouse, rev 1.00/0.00, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000ec80, size 7, enabled map[14]: type 1, range 32, base f8fffc00, size 7, enabled pcib2: matched entry for 2.0.INTA (source \\_SB_.PCI0.LNKC) pcib2: slot 0 INTA is routed to irq 11 found-> vendor=0x10b7, dev=0x9200, revid=0x78 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac42, revid=0x00 bus=2, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac42, revid=0x00 bus=2, slot=1, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f8fff000, size 11, enabled map[14]: type 1, range 32, base f8ff8000, size 14, enabled pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD) pcib2: slot 1 INTA is routed to irq 11 found-> vendor=0x104c, dev=0x8027, revid=0x00 bus=2, slot=1, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 pcib2: matched entry for 2.3.INTA (source \\_SB_.PCI0.LNKD) pcib2: slot 3 INTA is routed to irq 11 found-> vendor=0x104c, dev=0xac50, revid=0x01 bus=2, slot=3, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2 pcib2: device xl0 requested decoded memory range 0xf8fffc00-0xf8fffc7f xl0: using memory mapped I/O xl0: Ethernet address: 00:08:74:e3:e9:91 xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xf4000000-0xfbffffff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD) pcib2: slot 1 INTA is routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4000000 0x020000a0 0x20040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b 0x40: 0x00d41028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xf4000000-0xfbffffff cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD) pcib2: slot 1 INTA is routed to irq 11 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4001000 0x020000a0 0x20050500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b 0x40: 0x00d41028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: <Texas Instruments PCI4451> mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8fff7ff irq 11 at device 1.2 on pci2 fwohci0: latency timer 32 -> 32. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xf8fff000-0xf8fff7ff fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 42:4f:c0:00:1d:7d:90:41 fwohci0: resetting OHCI...done (loop=0) fwohci0: phy read failed(1). fwohci0: fwphy_rddata: 0x2 loop=1, retry=1 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:7d:90:41 fwe0: bpf attached sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 cbb2: <TI1410 PCI-CardBus Bridge> irq 11 at device 3.0 on pci2 pcib2: device cbb2 requested decoded memory range 0xf4000000-0xfbffffff cardbus2: <CardBus bus> on cbb2 pccard2: <16-bit PCCard bus> on cbb2 cbb2: [MPSAFE] cbb2: PCI Configuration space: 0x00: 0xac50104c 0x02100007 0x06070001 0x00022008 0x10: 0xf4002000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0xab0112a3 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0044b060 0x00000000 0x00000000 0x01000002 0x90: 0x616000c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000000f 0x0000001a 0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x801 0x801 0x801 0x801 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 89 4f 4f 8d 57 07 c0 1f 00 4f 0d 0e 00 00 07 80 95 83 8f 28 1f 8f c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 89 4f 4f 8d 57 07 c0 1f 00 4f 0d 0e 00 00 07 80 95 83 8f 28 1f 8f c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1994126400 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 1ee8b000 OUTL ST2 ALL ALL 12 00000000 1ee8b080 8411:0009 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat1: battery initialization start acpi_cmbat1: battery initialization done, tried 1 times bus_explore done sbp_post_explore (sbp_cold=2) pcib2: device pccard2 requested decoded memory range 0xf4000000-0xfbffffff pccard2: CIS version PC Card Standard 5.0 pccard2: CIS info: Dell, TrueMobile 1150 Series PC Card, Version 01.01, pccard2: Manufacturer code 0x156, product 0x2 pccard2: function 0: network adapter, ccr addr 3e0 mask 1 pccard2: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel pcib2: device pccard2 requested decoded I/O range 0x100-0xffffffff pcib2: device pccard2 requested decoded memory range 0xf4000000-0xfbffffff wi0: <Dell TrueMobile 1150 Series PC Card> at port 0x100-0x13f irq 11 function 0 config 1 on pccard2 pcib2: device wi0 requested decoded I/O range 0x100-0x13f pcib2: device pccard2 requested decoded I/O range 0x100-0x13f pcib2: device wi0 requested decoded I/O range 0x100-0x13f wi0: 802.11 address: 00:02:2d:84:22:18 wi0: using Lucent Embedded WaveLAN/IEEE wi0: Lucent Firmware: Station (8.10.1) wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH3 chip ata0-master: setting UDMA100 on Intel ICH3 chip ata0-slave: setting PIO4 on Intel ICH3 chip GEOM: create disk ad0 dp=0xc4679460 ad0: <IC25N040ATCS05-0/CS4OA63A> ATA-5 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:00 typ:222 s(CHS):0/1/1 e(CHS):3/254/63 s:63 l:64197 [1] f:00 typ:12 s(CHS):4/0/1 e(CHS):1023/254/63 s:64260 l:45062325 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:57641220 l:20498940 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 32868864 end 32901119 GEOM: Configure ad0s2, start 32901120 length 23071910400 end 23104811519 GEOM: Configure ad0s3, start 29512304640 length 10495457280 end 40007761919 acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4240N/D110> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: 120mm audio disc GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s3b, start 268435456 length 1051303936 end 1319739391 GEOM: Configure ad0s3c, start 0 length 10495457280 end 10495457279 GEOM: Configure ad0s3d, start 1319739392 length 268435456 end 1588174847 GEOM: Configure ad0s3e, start 1588174848 length 268435456 end 1856610303 GEOM: Configure ad0s3f, start 1856610304 length 8638846976 end 10495457279 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init Linux ELF exec handler installed WARNING: driver "rtc" used unreserved major device number 202 acpi_cmbat0: battery initialization failed, giving up agp0: Setting AGP v2 mode 1 info: [drm] Loading R200 Microcode drm0: [MPSAFE]Received on Mon Jan 05 2004 - 05:59:34 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:36 UTC