Re: Booting stops on sysinstall

From: Eivind Olsen <eivind_at_aminor.no>
Date: Wed, 07 Jan 2004 13:00:06 +0100
--On 7. januar 2004 00:47 -0700 Scott Long <scottl_at_freebsd.org> wrote:
> Eivind Olsen wrote:
>> I just tried to boot FreeBSD 5.2-RC2 from CD (to install it) but it
>> stops. I see there's already a PR for this dated 28th of December 2003:
>> i386/60671
> Can you submit a full boot log?

I'll see what I can do. Hm. Doesn't look like I'm able to find all of it in 
the scrollback buffer. Here's what I find (manually copied) from a verbose 
boot. Is this of any help to anyone?

[...]
embedded    0    0    B   0x61  3 4 5 7 9 10 11
embedded    0    0    C   0x62  3 4 5 7 9 10 11
embedded    0    0    D   0x63  3 4 5 7 9 10 11
embedded    0   31    A   0x62  3 4 5 7 9 10 11
embedded    0   31    B   0x61  3 4 5 7 9 10 11
embedded    0   29    A   0x60  3 4 5 7 9 10 11
embedded    0   29    B   0x63  3 4 5 7 9 10 11
embedded    0   29    C   0x62  3 4 5 7 9 10 11
embedded    0    1    A   0x60  3 4 5 7 9 10 11
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 2 dev 10 func 0
AcpiOsDerivePciId: bus 2 dev 10 func 1
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 4, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.29.0
\_SB_.PCI0.LPC0.LNKD irq   0: [  3  4  5  7  9 10 11] low,level,sharable 
0.29.1
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.29.2
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.31.0
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.31.1
---- before setting priority for links ------------
\_SB_.PCI0.LPC0.LNKD:
        interrupts:          3     4     5     7     9    10    11
        penalty:          1110  1110   110  1110   110   110   510
        references:     1
        priority:       0
---- before fixup boot-disabled links -------------
\_SB_.PCI0.LPC0.LNKD:
        interrupts:          3     4     5     7     9    10    11
        penalty:          1110  1110   110  1110   110   110   510
        references:     1
        priority:       595
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.29.0
\_SB_.PCI0.LPC0.LNKD irq  10: [  3  4  5  7  9 10 11] low,level,sharable 
0.29.1
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.29.2
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.31.0
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 3, range 32, base ec000000, size 26, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1a31, revid=0x04
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
        map[20]: type 4, range 32, base 000018c0, size  5, enabled
pcib0: matched entry for 0.29.INTA (source \_SB_.PCI0.LPC0.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x2482, revid=0x02
        bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        map[20]: type 4, range 32, base 000018e0, size  5, enabled
pcib0: matched entry for 0.29.INTC (source \_SB_.PCI0.LPC0.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found-> vendor=0x8086, dev=0x2487, revid=0x02
        bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=11
found-> vendor=0x8086, dev=0x2448, revid=0x42
        bus=0, slot=30, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
        bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type 4, range 32, base 000001f0, size  3, enabled
        map[14]: type 4, range 32, base 000003f4, size  2, enabled
        map[18]: type 4, range 32, base 00000170, size  3, enabled
        map[1c]: type 4, range 32, base 00000374, size  2, enabled
        map[20]: type 4, range 32, base 00001c20, size  4, enabled
        map[24]: type 1, range 32, base e8000000, size 10, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x02
        bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        map[20]: type 4, range 32, base 00001c00, size  5, enabled
pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x2483, revid=0x02
        bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        map[10]: type 4, range 32, base 00001000, size  8, enabled
        map[14]: type 4, range 32, base 00001880, size  6, enabled
pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x2485, revid=0x02
        bus=0, slot=31, func=5
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        map[10]: type 4, range 32, base 00001400, size  8, enabled
        map[14]: type 4, range 32, base 00001800, size  7, enabled
pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x2486, revid=0x02
        bus=0, slot=31, func=6
        class=07-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xeffffff at device 
0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xe8100000-0xe81fffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
---- initial configuration ------------------------
\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
1.0.0
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
1.0.0
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
        map[10]: type 3, range 32, base f0000000, size 27, enabled
        map[14]: type 4, range 32, base 00002000, size  8, enabled
        map[18]: type 1, range 32, base e8100000, size 16, enabled
pcib1: matched entry for 1.0.INTA (source \_SB_.PCI0.LPC0.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x1002, dev=0x4c57, revid=0x00
        bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x18c0-0x18df 
irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x18e0-0x18ff 
irq 11 at device 29.2 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   4
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xe8200000-0xe82fffff
pcib2:   prefetched decode 0xf8000000-0xf80fffff
---- initial configuration ------------------------
\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.10.0
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.10.1
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.12.0
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.13.0
\_SB_.PCI0.LPC0.LNKD irq  10: [  3  4  5  7  9 10 11] low,level,sharable 
2.13.1
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.14.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.10.0
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.10.1
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.12.0
\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.13.0
\_SB_.PCI0.LPC0.LNKD irq  10: [  3  4  5  7  9 10 11] low,level,sharable 
2.13.1
\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 
2.14.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib2: matched entry for 2.10.INTA (source \_SB_.PCI0.LPC0.LNKA)
pcib2: slot 10 INTA is routed to irq 11
found-> vendor=0x1217, dev=0x6933, revid=0x02
        bus=2, slot=10, func=0
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
pcib2: matched entry for 2.10.INTB (source \_SB_.PCI0.LPC0.LNKB)
pcib2: slot 10 INTB is routed to irq 11
found-> vendor=0x1217, dev=0x6933, revid=0x02
        bus=2, slot=10, func=1
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 00003000, size  8, enabled
        map[14]: type 1, range 32, base e8204800, size  8, enabled
pcib2: matched entry for 2.12.INTA (source \_SB_.PCI0.LPC0.LNKC)
pcib2: slot 12 INTA is routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
        bus=2, slot=12, func=1
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 
ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 3, range 32, base f8000000, size 12, enabled
pcib2: matched entry for 2.13.INTA (source \_SB_.PCI0.LPC0.LNKC)
pcib2: slot 13 INTA is routed to irq 11
found-> vendor=0x1260, dev=0x3873, revid=0x01
        bus=2, slot=13, func=0
        class=02-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 1, range 32, base e8204000, size 11, enabled
        map[14]: type 1, range 32, base e8200000, size 14, enabled
pcib2: matched entry for 2.14.INTA (source \_SB_.PCI0.LPC0.LNKB)
pcib2: slot 14 INTA is routed to irq 11
found-> vendor=0x104c, dev=0x8026, revid=0x00
        bus=2, slot=14, func=0
        class=0c-00-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> irq 11 at device 10.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xe8200000-0xe82fffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x69331217 0x04100007 0x06070002 0x00822000
  0x10: 0xe8200000 0x020000a0 0x20030302 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b
  0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000
  0x90: 0x0c0023bf 0x824203ea 0x20500000 0x00000000
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> irq 11 at device 10.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xe8200000-0xe82fffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x69331217 0x04100007 0x06070002 0x00822000
  0x10: 0xe8201000 0x020000a0 0x20040402 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400020b
  0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000
  0x90: 0x0c0023bf 0x824203ea 0x20500000 0x00000000
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pcib2: device re0 requested decoded I/O range 0x3000-0x30ff
pcib2: device rl0 requested decoded I/O range 0x3000-0x30ff
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 
0xe8204800-0xe82048ff irq 11 at device 12.0 on pci2
pcib2: device rl0 requested decoded I/O range 0x3000-0x30ff
rl0: Ethernet address: 00:e0:00:ae:51:50
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 13:0 on 
pci2
pcib2: device wi0 requested decoded memory range 0xf8000000-0xf8000fff
wi0: 802.11 address: 00:e0:00:89:17:f7
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.1)
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 
0xe8200000-0xe8203fff,0xe8204000-0xe82047ff irq 11 at device 14.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xe8204000-0xe82047ff
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No.of Isochronous channel is 4.
fwohci0: EUI64 00:00:0e:10:00:e0:73:1c
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:0e:e0:73:1c
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 
0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
0xe8000000-0xe80003ff at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 
devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
unknown: not probed (disabled)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 73 02 14
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
sio1: irq maps: 0x801 0x809 0x801 0x801
sio1 port 0x400-0x43f,0x2e8-0x2ef irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 in isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbfff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this 
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1594835952 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x01
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
0f5ac000 OUTL ST2 ALL ALL    12 00000000 0f5ac080 8411:000c RUN,ACTIVE, ack 
complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09dfa28
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 4 steps (100% to 25%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
cbb0: Unsupported card type detected
cbb1: Unsupported card type detected
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH3 chip
ata0-master: setting UDMA100 on Intel ICH3 chip
GEOM: create disk ad0 dp=0xc32cc260
ad0: <TOSHIBA MK2018GAS/Q2.02 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure md0a, start 0 length 4423680 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: new disk ad0
bus_explore done
sbp_post_explore (sbp_cold=2)
ar: FreeBSD check1 failed
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:39053952
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 19995623424 end 19995655679
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH3 chip
acd0: <HITACHI DVD-ROM GD-S250/0012> DVDROM drive at ata1 as master
acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
[...here it hangs for a while...]
acpi_cmbat1: battery initialization failed, giving up
[...nothing more happens now...]



The machine isn't totally dead as I can scroll up/down in the scrollback 
buffer, but nothing else seems to be happening.

-- 
Regards / Hilsen
Eivind Olsen
<eivind_at_aminor.no>
Received on Wed Jan 07 2004 - 02:58:18 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:36 UTC