Re: em0 watchdog timeouts

I  know it's kinda late, but I also still have exactly the same problem. Apart 
from that 5.2 works perfectly fine! Any hints??

-Ben

On Tuesday 23 December 2003 14:32, Alfred Perlstein wrote:
> * Alfred Perlstein <bright_at_mu.org> [031223 06:23] wrote:
> > I have this...
> > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port
> > 0x1000-0x103f mem 0xec800000-0xec81ffff,0xec820000-0xec83ffff irq 20 at
> > device 8.0 on pci0
> >
> > I keep getting this...
> > em0: Link is up 1000 Mbps Full Duplex
> > em0: watchdog timeout -- resetting
> > em0: Link is up 1000 Mbps Full Duplex
> > em0: watchdog timeout -- resetting
> > em0: Link is up 1000 Mbps Full Duplex
> > em0: watchdog timeout -- resetting
> > em0: Link is up 1000 Mbps Full Duplex
> > em0: Link is up 1000 Mbps Full Duplex
> > em0: watchdog timeout -- resetting
> > em0: Link is up 1000 Mbps Full Duplex
> > em0: watchdog timeout -- resetting
> >
> > And the card doesn't seem to want to play with my other FreeBSD.
> >
> > Could the reset function be tweaked to be a bit more agressive?
> >
> > Is there something I can do to diagnose this?
>
> also this:
>
> em0: Excessive collisions = 0
> em0: Symbol errors = 0
> em0: Sequence errors = 0
> em0: Defer count = 0
> em0: Missed Packets = 18809
> em0: Receive No Buffers = 1281
> em0: Receive length errors = 0
> em0: Receive errors = 0
> em0: Crc errors = 0
> em0: Alignment errors = 0
> em0: Carrier extension errors = 0
> em0: XON Rcvd = 0
> em0: XON Xmtd = 2266
> em0: XOFF Rcvd = 0
> em0: XOFF Xmtd = 21061
> em0: Good Packets Rcvd = 1063512
> em0: Good Packets Xmtd = 1310406
> em0: fifo workaround = 0, fifo_reset = 0
> em0: hw tdh = 0, hw tdt = 0
> em0: Num Tx descriptors avail = 256
> em0: Tx Descriptors not avail1 = 0
> em0: Tx Descriptors not avail2 = 0
> em0: Std mbuf failed = 0
> em0: Std mbuf cluster failed = 0
> em0: Driver dropped packets = 0