On Thu, Jan 08, 2004 at 02:18:32PM -0600, Brian Towles wrote: > On Thu, 2004-01-08 at 14:07, Brooks Davis wrote: > > Thanks for the feedback. > > > I suspect the attempt to use the mfs image is your problem. All the mfs > > stuff in the PXE article is unnecessicary. > > > > You can directly boot a standard install disk by pointing tftp at > > the cdrom mount point and exporting the cdrom vis nfs. Then set > > filename to "boot/pxeboot" in dhcpd.conf and option root-path to > > "server:/cdrom_mount_point" > > My dhcpd.conf and nfs are already set up that way. Removing the mfs > image doesnt change anything ... except now i get a reboot after the > hang with the same messages going on. Hmm, do you happen to have a more normal PC that you can PXE boot to make sure the problem really is the blade? I wouldn't be suprised if it is the blade, but making sure would be good. One thought, how are you accessing the console on these machines? Also, do they have PS/2 ports? -- Brooks
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:37 UTC