Selon sos_at_deepcore.dk: > It seems Regis GRAF wrote: > > > > Jan 13 20:45:35 tiny kernel: ad0: FAILURE - WRITE_DMA > > > status=51<READY,DSC,ERROR> > > > > error=84<ICRC,ABORTED> LBA=79763263 > > > > > > > The 5.1p11 never issue a message concerning problem with cable or write > error. I > > never had read error. > > The controler is an add-on card on this machine. The cable does normally > support > > ata133 (I'll verify this tonight) and the whome worked perfectly (with > UDMA133) > > on 5.1p11. > > There hasn't been any timing changes other than we are now using the memio > interface (which might cause requests to be issued faster).. > > -Søren > is there anything I can do ? I use atacontrol after every reboot, which is not the best solution :) I modified the file ata_chipset.c, changing UDMA6 to UDMA5 for SiL0680... I hope it solved the problem for the moment... ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.Received on Wed Jan 14 2004 - 06:06:36 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:38 UTC