Re: 5.2-RELEASE: unable to mount cd-roms

From: Jon Noack <noackjr_at_compgeek.com>
Date: Wed, 14 Jan 2004 14:40:27 -0600
On 1/14/2004 3:59 AM, matti k wrote:
> On Tue, 13 Jan 2004 02:37:59 -0600 Jon Noack <noackjr_at_compgeek.com>
> wrote:
>> I am unable to mount CD-ROMs with 5.2-RELEASE.  I get the following
>> error message:
>> 
>> cd9660: /dev/acd0: Input/output error
> 
> I saw this on 5.2-RC2. I have cdrom drives on primary master and 
> secondary master. Using SATA controller (Sil3112 ;)) for hard drive.
> I could mount the secondary drive ok but not the primary. Had to use 
> umount -f to unmount it though.
> 
>> Also, toggling "hw.ata.atapi_dma" does not change the behavior.
> 
> Disabling this allowed me to mount both cdrom drives but still had to
> use umount -f.
> 
> Both drives are working correctly with 5.2-CURRENT updated yesterday.
> Here's a dmesg :) ...

I first had the problem with hw.ata.atapi_dma disabled (in other words, 
I left it as the default after installing 5.2-RELEASE from scratch).  I 
then enabled it to see if it would change anything and it happened to be 
on when I posted the dmesg.

Jon
Received on Wed Jan 14 2004 - 11:40:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:38 UTC